14365 results for ""Pennsylvania+German"+ACS+study+'Socius'+open+access"

in 13.19 milliseconds.

• Clinical Study of Intermittent Positive Pressure Breathing (IPPB-BioLINCC)

  Data Access NOTE: Please refer to the “Authorized Access” section below for information about how access to the data from this accession differs from many other dbGaP accessions. Objectives: To evaluate the efficacy of long-term intermittent positive pressure breathing (IPPB) treatment when used as an adjunct to the overall care of ambulatory outpatients with chronic obstructive pulmonary disease. The evaluation compared the use of IPPB with use of a powered nebulizer.Participants: A total of 3218 participants were enrolled.Design: Multicenter randomized controlled clinical trial. Conclusions: Compliance with treatment, lung function, and quality of life were evaluated at regular intervals during follow-up, and records were kept of hospitalizations and vital status. Treatment compliance was less than optimal; only half of the participants used their devices for the prescribed amount of time or 10 minutes at least three times a day. Although this was disappointing, it was probably the best compliance that could be attained. There was no statistically significant difference between the treatment groups in mortality, rate and duration of hospitalizations, or change in lung function or life quality with time, overall or for clinically relevant subgroups. The trial group saw no advantage of IPPB over compressor nebulizer therapy and concluded that, if an advantage existed, it must be marginal.

  Study phs004010

• ICR Centre for Paediatric Experimental Medicine

  This is the DAC for granting access to consented patient data generated in association with the Centre for Paediatric Experimental Medicine at ICR. Data access can be granted by bioinformatician Claire Lynn: claire.lynn@icr.ac.uk

  Dac EGAC50000000362

• NEOPREDICT-Lung: Neoadjuvant Immunotherapy for Resectable NSCLC

  Links via: DOI: https://doi.org/10.1038/s41591-024-02965-0 PubMed: https://pubmed.ncbi.nlm.nih.gov/38689060/ Journal: https://www.nature.com/articles/s41591-024-02965-0 Abstract Antibodies targeting the immune checkpoint molecules PD-1, PD-L1 and CTLA-4 administered alone or in combination with chemotherapy are standard of care in most patients with metastatic non-small cell lung cancers. When given prior to curative surgery, tumor responses and improved event-free survival are achieved. New antibody combinations may be more efficacious and tolerable. In an ongoing, open-label phase II study, 60 biomarker-unselected, treatment-naïve patients with resectable non-small cell lung cancer were randomized to receive two preoperative doses of nivolumab (anti-PD-1) with or without relatlimab (anti-LAG-3) antibody therapy. The primary study endpoint was feasibility of surgery within 43 days, which was met by all patients. Curative resection was achieved in 95% of patients. Secondary endpoints included pathological and radiographic response rates, pathologically complete resection rates, disease-free and overall survival rates, and safety. Major pathological (≤10% viable tumor cells) and objective radiographic responses were achieved in 27% and 10% (nivolumab), and 30% and 27% (nivolumab and relatlimab) of patients, respectively. In 100% (nivolumab) and 90% (nivolumab and relatlimab) of patients tumors and lymph nodes were pathologically completely resected. With 12 months median duration of follow-up, disease-free survival and overall survival rates at 12 months were 89% and 93% (nivolumab), and 93% and 100% (nivolumab and relatlimab). Both treatments were safe with grade ≥ 3 treatment-emergent adverse events reported in 10% and 13% of patients per study arm. Exploratory analyses provided insights into biological processes triggered by preoperative immunotherapy. This study establishes the feasibility and safety of dual targeting of PD-1 and LAG-3 prior to lung cancer surgery.

  Study EGAS00001007753

• Comprehensive Transcriptional Analysis of Early Stage Urothelial Carcinoma using whole transcriptome sequencing

  The expression profile and sequence variants of 476 early stage urothelial carcinoma were studied using whole transcriptome sequencing. RNA-Seq libraries were prepared by Ribo-Zero treatment of total-RNA followed by library preparation using ScriptSeq (both Epicentre/Illumina). RNA-Seq libraries were paired-end sequenced (2x 101 bp) on Illumina HiSeq 2000 and the resulting fastq files were processed using tools from the Genome Analysis Toolkit (GATK and from the Tuxedo suite. Access to the sequence data (mapped and un-mapped bam and vcf files), containing person identifying information, needs signature on a controlled access form, and can be accessed at The European Genome-phenome Archive (EGA) following request. An expression matrice of FPKM values are available without restriction at ArrayExpress (E-MTAB-4321).

  Study EGAS00001001236

• NSCCG_CRC_GWAS

  Genotype data of 7,281 individuals with colorectal cancer from the National Study of Colorectal Cancer Genetics (NSCCG) study. Individuals genotyped on the Illumina OncoArray. Data provided in plink format and has not been quality controlled. Control samples used were obtained from the PRACTICAL and BCAC consortia, and are available through the respective Data Access Coordination Committees (http://practical.icr.ac.uk and http://bcac.ccge.medschl.cam.ac.uk/)

  Dataset EGAD00010002184

• Oncogenic Ectodomain deletion of FGFR1 caused by Breakage-Fusion-Bridges in Squamous Cell lung Cancer

  The identification of recurrent 8p11.23 amplifications including FGFR1 raised the hope of a treatable target in squamous cell lung cancer (SQLC). However, only a minority of patients with FGFR1-amplified tumors respond to single agent inhibitor therapy targeting FGFR. To understand the underlying mechanism of FGFR1 dependency, we performed whole genome and transcriptome sequencing of 25 FGFR1-amplified primary tumors with unknown response upon FGFR inhibition. In addition, we performed deep sequencing of 26 FGFR1-amplified samples whereof the response upon FGFR inhibition was known for 25 samples. In both cohorts we identified intra-chromosomal tail-to-tail breaks close to the FGFR1 transcription start site, being responsible for focal amplification of FGFR1. These specific breaks are caused by a Breakage-Fusion-Bridge-like (BFB-like) mechanism. Here, we associate these breaks with FGFR inhibitor sensitivity. Moreover, in some cases these breaks are located within the open reading frame of FGFR1, which leads to the expression of an ΔEC-FGFR1 transcript that lacks the ecto-domain. Overexpression of ΔEC-FGFR1 transforms Baf3 cells and lead to an FGFR1-dependent phenotype. Our results demonstrate that the truncation of the FGFR1 ectodomain is a frequent event in 8p11.23-amplified squamous cell lung cancer caused by tail-to-tail breaks. These breaks might be used as a predictive therapeutic marker to stratify patients for FGFR-inhibitor therapy.

  Study EGAS00001005059

• Detection of mutational patterns in cell free DNA (cfDNA) of colorectal cancer by custom amplicon sequencing

  Monitoring the mutational patterns of solid tumors during cancer therapy is a major challenge in oncology. Analysis of mutations in cell free (cf) DNA offers a non-invasive approach to detect mutations that may be prognostic for disease survival or predictive for primary or secondary drug resistance. A main challenge for the application of cfDNA as a diagnostic tool is the diverse mutational landscape of cancer. Here, we developed a flexible end-to-end experimental and bioinformatics workflow to analyze mutations in cfDNA using custom amplicon sequencing. Our approach relies on open software tools to select primers suitable for multiplex PCR using minimal cfDNA as input. In addition, we developed a robust linear model to identify specific genetic alterations from sequencing data of cfDNA. We used our method to design a custom amplicon panel suitable for detection of hotspot mutations relevant for colorectal cancer and analyzed mutations in serial cfDNA samples from 34 patients with advanced colorectal cancer. Our data demonstrates that recurrent and patient-specific mutational patterns can be reliably detected for the majority of patients. Furthermore, we show that the allele frequency of mutations in cfDNA correlates well with disease progression. Finally, we demonstrate that monitoring of cfDNA can outperform the predictive power of currently used tumor markers and reveal mechanisms of resistance to anti-EGFR antibody treatment.

  Study EGAS00001003382

• Roifman_DAC

  This Data Access Committee (DAC) will be set up to review applications, and render decisions for requests submitted to EGA to access data deposited into ega-box-1592 by Dr. Chaim Roifman at the Hospital for Sick Children in Toronto, Canada. Contact: Dr. Chaim Roifman. email:chaim.roifman@sickkids.ca

  Dac EGAC50000000243

• A Phase I Study With a Personalized Neoantigen Cancer Vaccine in Glioblastoma Multiforme

  Neoantigens, which are derived from tumor-specific protein-coding gene mutations, are exempt from central tolerance, can generate robust immune responses and function as bona fide antigens that facilitate tumor rejection. A strategy of using multi-epitope and personalized neoantigen vaccination has previously been tested in patients with high-risk melanoma. We demonstrated that this strategy is feasible for glioblastoma (GBM) which typically has a relatively low mutation load and an immunologically 'cold' tumor microenvironment. We conducted whole exome sequencing (WES) of tumor and normal cells from individual GBM patients to identify tumor-specific mutations. We assessed the expression of mutated alleles by RNA-sequencing of tumor, and used personalized neoantigen-targeting vaccines to immunize newly diagnosed GBM patients following surgical resection and conventional radiotherapy in a phase I/Ib study. Patients who did not receive dexamethasone, a highly potent corticosteroid that is frequently prescribed to treat cerebral oedema in GBM patients, generated circulating polyfunctional neoantigen-specific CD4+ and CD8+ T cell responses that were enriched in a memory phenotype and showed an increase in the number of tumor-infiltrating T cells. Using single-cell T cell receptor analysis, we provided an evidence that neoantigen-specific T cells from the peripheral blood can migrate into an intracranial GBM tumor. Neoantigen-targeting vaccines thus have the potential to favorably alter the immune environment of GBM.In order to discover cancer antigens derived from annotated and unannotated protein-coding regions of the genome, we carried out matched ribosome profiling (Ribo-Seq) on two GBM samples. We discovered novel or unannotated open reading frames (nuORFs) and their expression levels as well as somatic mutations within the nuORFs, which could be used to predict potential neoantigens.

  Study phs001519

• Submitter Portal

  Submitter Portal The Submitter Portal does not support array submissions! Please refer to the array documentationAny new objects registered in the Submitter Portal will not be available for use in an array submission For further information please check our Submission FAQs, submission quickguide as well as submission terms! The metadata submission process can be difficult and time-consuming. For this reason, the EGA has developed the Submitter Portal, a tool that was created to offer a simplified and user-friendly method of registering metadata. Our portal provides features that are intended to make the input of metadata easier, ensuring that your data is registered correctly and effectively. Our page is divided into logical sections and includes a helpful video instruction to further assist you as you complete the submission process. With the Submitter Portal, you can rest assured that the submission of your data is in good hands. Submitter Portal Index Previous steps Access to Submitter Portal Start a Submission Take The Tour Tutorial Previous steps Create your EGA account To submit data, you first need to create your EGA user. Then, once your account has been verified by the Help Desk team, you will be able to request a submitter role and send the EGA Data Processing Agreement (DPA). In the case you already have an EGA account, or an ega-box (submission account), you can skip this step. Upload your files Please note that all your files must be encrypted using the Crypt4GH tool before upload them.As soon as you are assigned with a submitter role and added your public key to your profile, you will be able to connect to the EGA inbox and upload your files. Understand the EGA metadata schema It's crucial to comprehend the EGA metadata schema, a set of rules that specify how data is organised, described, and shared inside the EGA, in order to get the most out of this resource. Learn all about EGA metadata schema! Register your DAC and policy There are two objects in the EGA metadata schema that are registered in a separate portal. All DACs and policy objects are registered using the DAC Portal, a tool developed by EGA to help data controllers manage their data stored at the EGA. You can find relevant information in the DAC Portal Guide. Access to Submitter Portal 1. Request Submitter Role Once you have created your EGA user, request a Submitter Role and complete relevant information such as submission type and size. 2. Signature of the Data Processing Agreement The Data Processing Agreement (DPA) signed by CRG and EMBL-EBI (Joint Data Processors for the EGA) can be downloaded to the submitter for its signature. Further information related to the DPA can be in the Privacy Notice section. The DPA should be signed by a legal representative of the submitter with power of attorney/appointment duly authorised to sign contracts on behalf of the institution. The submitter will return a fully-executed copy of the DPA to us. Please note that due to the high volume of submissions to EGA the DPA is non-negotiable. Once you have completed all the information and attached the DPA signed, send your Submitter request and the EGA Helpdesk Team will validate it and send a confirmation to start submitting your metadata. Start a Submission The steps below will show you how to start a submission and are accompanied with a tutorial and the Take the tour of Submitter Portal. 1. Login Go to the Submitter Portal interface and log in using your EGA account credentials. 2. Create a submission The Submitter Portal interface will show you any already existing open submission. To start a new submission click on “Create a Submission”.In this phase you have the option to add any collaborator(s) as well as their permissions (“Read only” or “Read & Write”). If you want to invite all the collaborators from a previous submission, you can add them by selecting said submission.In the event that the submission has been closed, you will need to reopen it. To do this, you will need to modify one of the objects in the submission, for example, copy and paste the title. Once the submission is open, you can add a collaborator. Further information can be found in the Submission Tour 3. Create Study Click on add Study and complete the form with the relevant information. The fields with an asterisk (*) are mandatory. Further information can be found in the Submission Tour4. Create Sample Sample registration can be done either individually or in batch by using a template. Batch upload: download the template and complete it with information about the sequencing samples. Upload the samples.csv and the sample will be created.Add single sample: complete the mandatory fields with the metadata information of your sample.  Further information can be found in the Submission Tour5. Create Experiment Register an experiment with ​information about the sequencing methods, protocols and machines. Experiments generate the connection between samples and study. Further information can be found in the Submission Tour6. Create Run Samples, experiments and files are linked through runs. To register a run, you will be asked to select the appropriate experiment and the file format. Run registration can be done either individually or in batch by using a template. Batch upload: download the template and complete it with the sample - file linkage. Upload the run.csv and the runs will register.As the INBOX is a directory, bear in mind to include the file path (/). Example: /filename.c4gh. Add single run: select the file format, sample and experiment from the drop box. For re-using submitted samples, please use the EGA accession ID (EGANXXX). Please note that files must be uploaded in your inbox before linking your files and samples. Further information can be found in the Submission Tour7. Create Analysis Analysis should be only used for BAM/BAI or CRAM/CRAI pair, VCF and phenotype linkage to samples. The analysis is an EGA specific metadata object that links samples to files. This object also stores some metadata about your experiments, such as the experiment type, genome reference, or the platform used. **If only BAM or CRAM alignment files are submitted but not the original unaligned FASTQ files, then please make sure that the BAM or CRAM files also contain the unaligned reads. This is critical to enable primary re-analysis and re-alignment of the dataset using new tools or future genome assemblies.** Start by selecting the samples to be linked to the file, and then populate the required attribute fields. Please be aware of the existence of mandatory fields that must be populated.When populating the chromosome field (mandatory), please select the chromosomes from the checkbox. Please take in consideration that EGA allows for the re-use of any registered metadata. Therefore, a previously registered study or samples can be referenced for the analysis in the current data submission.Further information can be found in the Submission Tour 8. Create Dataset Dataset contains the collection of runs/analysis data files subjected to controlled access by being associated with a Policy. Complete the mandatory fields such as title, description, type and policy. Please, take in consideration that DAC and Policy must be registered in advance in the DAC Portal. Similar to other metadata objects, you can re-use previous runs or analyses, using their EGA accessions IDs (runs - EGAR, analyses - EGAZ). Further information can be found in the Submission Tour 9. Finalise submission Once the files are ingested please delete them from your SFTP INBOX before finalising your submission. This will prevent the files from reappearing in your Submitter Portal Inbox. Once you have completed your submission, click on the Finalise button, and schedule an estimated release date. Afterwards, your submission will be sent to Helpdesk for approval. Please note that once the Helpdesk has approved your submission, you will receive the identifiers for your data. See the Frequently Asked Questions (FAQ) for more information. 10. Update closed submission If you want to append more file to a closed submission, you will need to re-open the submission where the dataset was registered. Find the Submission: go to the Submitter Portal Menu -> Datasets section and find the submission id (EGA0XXX).  Reopen the submission where the dataset is located: to reopen a submission, you must edit any object within the submission. For example, you can copy and paste the title. Take The Tour The Submitter Portal Take The Tour is a visual guidance of all the steps described previously about how to start a submission. Tutorial In this tutorial we will show you how to use the Submitter Portal to register your metadata. Please note the video focuses on the run-based submission (for raw files - fastq - and aligned data - BAM/CRAM) and analysis-based submission (for your BAM/BAI pairs, variation -VCF - and phenotype files).

  Documentation submission/metadata/submission/sequencing-phenotype/submitter-portal