These dataset contains NGS data from 380 samples from the EORTC-26101 clinical trial for patients with progressive glioblastoma.
This dataset includes linked-read whole-genome sequencing data from the normal ileal of the patient. The normal sample was sequenced using the 10x Genomics linked-read whole-genome sequencing (WGS) approach.
RNAseq in cryostat-microdissected metastatic and primary prostate cancer tissues and matched noncancerous tissues from the same study subjects.
Osteochondral explants were obtained from knee joints (n=17 explants) from the RAAK study. Paired-end 2x150 bp RNA sequencing (Illumina TruSeq mRNA Library Prep Kit, Illumina HiSeq X) was performed.
In this study, the DNA of 44 subjects with severe COVID-19 have been sequenced in order to explore rare genetic variants.
This study includes 542 of multi-region sampled whole exome sequencing data from 83 pancreatic cancer patients in 6 individual experiments : Kras wildtype, local recurrence, treatment-naive (MetomeV2), radiotherapy plus chemotherapy (Radome), chemotherapy-only group (Treatome) and Proj_B-100-478.
This dataset included cfMethyl-Seq data of 15 plasma cfDNA samples from 15 lung cancer patients and RRBS data of 58 lung tumor tissue samples from 58 lung cancer patients. The data were generated following the standard protocols.
The need for a detailed catalogue of local variability for the study of rare diseases within the context of the Medical Genome Project motivated the whole exome sequencing of 267 unrelated individuals, representative of the healthy Spanish population.
The electronic Medical Records and Genomics (eMERGE) Network is a consortium of five participating sites (Group Health Seattle, Marshfield Clinic, Mayo Clinic, Northwestern University, and Vanderbilt University) funded by the NHGRI to investigate the use of electronic medical record systems for genomic research. The goal of eMERGE is to conduct genome-wide association studies in approximately 19,000 individuals using EMR-derived phenotypes and DNA from linked Biorepositories. Using electronic phenotyping methods, the consortium used DNA samples from all participating sites to explore the genetic determinants of resistant hypertension. Treatment resistant hypertension is a common health problem in the clinical setting. A basic definition of resistant hypertension included subjects with uncontrolled blood pressure despite use of three antihypertensive medications or subjects requiring four or more medications to maintain control. Other conditions, such as secondary causes of hypertension, were exclusions. Site and participants include: Vanderbilt University: BioVU, Vanderbilt's DNA databank, is an enabling resource for exploration of the relationships among genetic variation, disease susceptibility, and variable drug responses, and represents a key first step in moving the emerging sciences of genomics and pharmacogenomics from research tools to clinical practice. BioVU acquires DNA from discarded blood samples collected from routine patient care. The biobank is linked to de-identified clinical data extracted from Vanderbilt's EMR, which forms the basis for phenotype definitions used in genotype-phenotype correlations. Marshfield Clinic: The Marshfield Clinic Personalized Medicine Research Project is a population-based biobank in central Wisconsin with more than 20,000 adult subjects who provided written, informed consent to access their medical records and provided a blood sample from which DNA was extracted and plasma and serum stored. In addition to an average of 30 years of medical history data, a questionnaire about environmental exposures, including a detailed food frequency questionnaire, is available to facilitate gene/environment studies. Northwestern University: The NUgene Project is a repository with longitudinal medical information from participating patients at affiliated hospitals and outpatient clinics from the Northwestern University Medical Center. Participants' DNA samples are coupled with data from a self-reported questionnaire and continuously updated data from our Electronic Medical Record (EMR) representing actual clinical care events. Northwestern has a state-of-the art, comprehensive inpatient and outpatient EMR system of over 2 million patients. NUgene has broad access to participant data for all outpatient visits as well as inpatient data via a consolidated data warehouse. NUgene participants consent to distribution and use of their coded DNA samples and data for a broad range of genetic research by third-party investigators. Group Health(GH)/University of Washington (UW): Aging and Dementia eMERGE study biorepository leverages rich population-based longitudinal data from both electronic medical records and in-depth research data to explore genome wide associations. Participants include Seattle-area members of GH (a large integrated health care system in Washington State) consented and enrolled in 1) the UW Alzheimer's Disease Patient Registry (ADPR) and 2) the Adult Changes in Thought (ACT) study. The ADPR (PI: Eric B. Larson; NIH/NIA U01 AG 006781) is a population-based registry of incident dementia cases designed to identify all new Alzheimer's Disease cases within GH from 1987 to 1996. Medical history, physical, laboratory testing, and neuropsychological testing were performed on all consenting potential cases for determination of dementia status by a consensus conference. The study base of the ADPR population was stable with an attrition rate of less than 1%/year. The ACT study (PI: Eric B. Larson; NIH/NIA U01 AG 006781) is an ongoing community-based cohort study of aging and dementia. The original cohort of 2,581 randomly selected dementia-free members age 65 and older was enrolled in 1994-1996 and expanded by 811 in 2000-2002. Continuous enrollment to maintain a cohort of 2,000 dementia free persons began in 2005. Participants receive biennial assessment including cognitive status determination. The ACT sub-sample is stable; for the original cohort, median enrollment in GH was 19 years prior to joining the ACT study, and 85% of the cohort has ≥ 10 years of GH enrollment. DNA for the ADPR participants were obtained through a companion study, Genetic Differences in Cases and Controls (PI: Walter Kukull; NIH/NIA R01 AG007584). DNA obtained through both studies were extracted from blood using Gentra Systems Puregene methods. DNA concentration is determined by UV optical density. All samples are checked for quality by 260/280 ratio. For long-term storage, samples are aliquoted and stored at -70°C. Mayo Clinic: The Mayo biobank is a disease-specific biobank for vascular diseases including peripheral arterial disease (PAD). PAD patients were identified from individuals referred to the non-invasive vascular laboratory for lower extremity arterial evaluation. Since 1997, laboratory findings have been recorded into an electronic database employing an in-house software package for data archiving and retrieval; this data becomes part of the Mayo EMR. Patients referred to the center with suspected PAD undergo a comprehensive non-invasive evaluation including the ankle-brachial index (ABI) - the ratio of blood pressure measured in the upper arms divided by blood pressure measured at the ankles. Controls subjects are identified from patients referred to the Cardiovascular Health Clinic for stress ECG. The prevalence of PAD in patients with normal exercise capacity who do not have inducible ischemia on the stress ECG, was <1%. Data regarding risk factors for atherosclerosis such as diabetes, dyslipidemia, hypertension, and smoking are ascertained from the EMR.
Programmatic submissions (XML based) For further information please check our Submission FAQs, submission quickguide as well as submission terms! Introduction Besides the Submitter Portal tool, EGA supports programmatic sequence and clinical data metadata submissions. If you are not sure what this means, you may want to explore our brief metadata introduction. Programmatic submissions are recommended for array-based submission. Moreove, it may be of help if your submission is recurrent or it is difficult to manage manually due to its sheer size. Otherwise, we highly recommend using the Submitter Portal to perform submissions. In this page we will guide you through the required steps to programmatically submit data to the EGA. Programmatic submissions require your metadata to be structured for an easy and straightforward validation and archival. It basically consists in formatting your metadata as Extensible markup language (XML) files and submitting them to the EGA using the WEBIN Before submitting metadata to the EGA, it is important to ensure that the information in your XML files is compliant with our standards. You can see further details on how these standards are maintained at EGA at our EGA Schemas documentation page. Using WEBIN, you can validate your XML files against EGA's schemas to ensure that your metadata is compliant before submission. WEBIN services WEBIN production service WEBIN test service We advise you to submit your metadata to the test service when submitting to the production service for the first time. The test service is identical to the production service except that all submissions will be discarded in the following 24 hours. This allows you to learn about the submission process without having to worry about data being submitted. Authentication Authentication is required each time a submission is made. The submission service uses HTTPS protocol for metadata encryption and identification to provide a secure submission environment. Data file upload Both Runs and Analyses reference files (e.g. FASTQ need to be uploaded to the EGA before these metadata objects are submitted. In other words, if you submit a Run that references a file that we cannot find associated with your account, the metadata submission will fail. See further details on how to upload your files in our File Upload documentation. Metadata model of the EGA Our metadata model is formed by multiple metadata objects. Check further details in our documentation at our EGA Schema documentation page. Working with EGA XMLs files Now that the basic concepts of the EGA metadata have been described, you can start preparing your programmatic submission through XML. Here you will find the guidance on how to prepare the XML files. Programmatic Submission Tutorial Video Take a look at the Programmatic Submission Tutorial Video, which explains the workflow of a programmatic submission and goes over an example metadata submission. Programmatic Submission Tutorial Video. When building your XML files, we recommend using text editors (e.g.Sublime Text or VisualStudio) that allow you to visualise the structure of the XML with ease. Furthermore, these editors constantly check the consistency of the XML structure. Alternatively, and if the submission consists of a big number of objects (specially analyses), you may find the tool star2xml handy. This tool allows for a direct conversion between metadata in a tabular format (e.g. a spreadsheet) into XMLs. Identifying objects: Aliases and center names Every EGA object must be uniquely identified within the submission account using their alias attribute. The aliases can be used in submissions to make references between EGA objects. Let us dig into EGA's use of aliases and center names: alias: every object should have a name that is unique within your submission account. Once submitted successfully, every alias will be assigned a unique and permanent accession (EGA ID). refname: when an object references another by its alias, the alias of the referenced object goes into the "refname" attribute of the referencing object. For example, if a sample has the alias "sample1", and an experiment uses this sample, then the experiment's "EXPERIMENT/SAMPLE/refname" attribute should be "sample1". center_name: The "center_name" attribute is required within the submission XML and, if not provided when the object is submitted, it will be automatically filled using your default EGA account center_name. This element is the "controlled vocabulary acronym or abbreviation that is provided to the account holder when the account is first generated". If the submitter is brokering a submission for another institute, the submitter should use their special broker account name in broker_name while the data centre acronym remains in center_name. Log-in details should have been provided when you requested a submission account. Please contact our Helpdesk team if you have any questions. run_center: Many submitting centers contract out the actual sample sequencing to another center. In these cases, the sequencing center should be acknowledged in the run_center attribute. Again, this is controlled vocabulary and the acronym should be sought from EGA helpdesk before submitting. Please contact our Helpdesk team if you have any questions. Prepare your XMLs The goal of this section is to provide sufficient information to be able to create the metadata XML documents required for programmatic submissions. Please note, the EGA utilises the XML schemas maintained at the European Nucleotide Archive (ENA). It is important due to the fact that by using a similar system, some pieces of documentation from the ENA's programmatic submission can also help you with your programmatic submission to the EGA. For example, you can submit programmatically without using a Submission XML by following the steps at Submission actions without submission XML. A submission does not have to contain all different types of XMLs. For example, it is possible to submit only a few samples; or a study that is later to be referenced. You can submit each object one by one, or submit all in a batch: you choose what method of submission works best for you. We do recommend, nevertheless, that you submit the objects to be referenced (e.g. samples or studies) first, and the objects that reference these (e.g. experiments or datasets) afterwards. You can see a graphical view of these objects and their relationships at our EGA Schemas page. Independently of the submission scenario, you will always require a Dataset XML. The entity of a dataset is what is used to control access to the given data, in the form of runs or analyses. In other words, when a requester is granted access, it is through the dataset and the objects (e.g. runs or analyses) that the dataset contains, granting access to them in one go. Given the nature of the EGA, a dataset XML will always be required for the data access. First, we will differentiate between submissions of "raw" and "processed" data: Runs and Analyses, respectively. Run data submissions Raw data derives from instruments "as is". For example, a plain sequence file (e.g. FASTQ or unaligned BAM files) would be considered raw data. A typical raw (unaligned) sequence read submission consists of 8 XMLs: Submission Study Sample Experiment Run DAC Policy Dataset When technical reads (e.g. barcodes, adaptors or linkers) are included in the submitted raw sequences, a spot descriptor must be submitted to describe the position of the technical reads so that they can be removed. The following data files can be submitted without providing spot descriptor information in the experiment/run XML: BAM files (single reads) SFF files (single reads without barcodes) FastQ files (single reads without any technical reads) Complete Genomics files Analysis data submissions Processed data is, in some way, refined raw data. This includes raw data that has been processed by some form of analysis method (e.g. alignment, noise reduction, etc.). For example, an aligned sequence (e.g. BAM file), that was created using raw FASTQ files, would be a processed file. This category includes most types of data: sequence alignment files (e.g. BAM or CRAM), clinical data (e.g. phenopackets), sequence variation files (e.g. VCF), sequence annotation, etc. A typical EGA analysis data submission consists of 7 EGA XML: Submission Study Sample Analysis DAC Policy Dataset We accept three different types of analysis data submissions: BAM files (for multiple read alignments) VCF files (for sequence variations) Phenotype files (in any format) In anycase, keep in mind that samples must be created in order to be referenced in the analyses. In other words, the provenance of the information within the BAM, VCF and phenotype files Example XMLs Below you can find a non-extensive list of example XMLs with descriptive fields (i.e. explaining what to provide in each field). Furthermore, you can also find real examples (i.e. the true value of the provided fields) in our GitHub repository. Submission XML The submission XML is used to validate, submit or update any number of other objects. The submission XML refers to other XMLs. New submissions use the ADD action to submit new objects. Object updates are done using the MODIFY action and objects can be validated using the VERIFY action. Descriptive submission XML example True values submission XML example Study XML The study XML is used to describe the study containing a title, a study type and abstract as it would appear in a publication. Descriptive study XML example True values study XML example Please use the following notation within the property "STUDY_LINKS" when including PubMed citations in the Study XML: <STUDY_LINKS> <STUDY_LINK> <XREF_LINK> <DB>PUBMED</DB> <ID>18987735</ID> </XREF_LINK> </STUDY_LINK> </STUDY_LINKS> Sample XML The sample XML is used to describe the samples used to obtain the data, whether they were sequenced, measured in any other way, or have an associated phenotype. The mandatory fields include information about the taxonomy of the sample, sex, subject ID and phenotype. For example, the mandatory attribute fields for each sample would look like these, within the array of "SAMPLE_ATTRIBUTES": <SAMPLE_ATTRIBUTES> <SAMPLE_ATTRIBUTE> <TAG>subject_id</TAG> <VALUE>free text!</VALUE> </SAMPLE_ATTRIBUTE> <SAMPLE_ATTRIBUTE> <TAG>sex</TAG> <VALUE>female/male/unknown</VALUE> </SAMPLE_ATTRIBUTE> <SAMPLE_ATTRIBUTE> <TAG>phenotype</TAG> <VALUE>Free text, EFO terms (e.g. EFO:0000574) are recommended</VALUE> </SAMPLE_ATTRIBUTE> </SAMPLE_ATTRIBUTES> Sample is one of the most important objects to be described biologically, it is highly recommended that “TAG-VALUE” pairs are generated as SAMPLE_ATTRIBUTES to describe the sample in as much detail as possible. For example, were we to give the population ancestry of the sample, we could add a new attribute to the array, in which, for example, we would indicate that the sample derives from an individual of "Mende in Sierra Leone" (MSL), with an african ancestry: <SAMPLE_ATTRIBUTE> <TAG>Population</TAG> <VALUE>MSL</VALUE> </SAMPLE_ATTRIBUTE> Given that VALUE and TAG are free text, the combinations are limitless in order to give you full flexibility on the information you want to provide. We recommend you use the Experimental Factor Ontology (EFO) to describe the phenotypes of your samples. You can provide more than one phenotype by adding more items to the array of SAMPLE_ATTRIBUTES. Phenotypes considered essential for understanding the data submission should be provided. Each phenotype described should be listed as a separate sample attribute <SAMPLE_ATTRIBUTE> </SAMPLE_ATTRIBUTE>. There is no limit to the number of phenotypes that can be submitted. If a suitable EFO accession cannot be found for your phenotype attribute, please consider using another controlled ontology database (e.g. HPO, MONDO, etc.) before using free text. Descriptive sample XML example True values sample XML example Experiment XML The experiment XML is used to describe the experimental setup, including instrument platform and model details, library preparation details, and any additional information required to correctly interpret the submitted data. Where any of these values differ between runs, a new experiment object must exist, since runs are grouped by experiments. Each experiment references a study and a sample by alias, or if previously-submitted, by accession. Pooled data must be demultiplexed by barcode for submission. Descriptive experiment ( Illumina paired read ) XML example True values experiment ( Illumina paired read ) XML example Run XML The run XML is used to associate data files with experiments and typically comprises a single data file (e.g. a FASTQ file). Please note that pooled samples should be de-multiplexed prior submission and submitted as different runs. Descriptive run XML example True values run XML example Analysis XML Given that an analysis can be used to submit any type of processed data to the EGA, we will list below an example of each of the three most common types of analysis XMLs submitted to the EGA: sequence alignments (e.g. BAM files); sequence variation (e.g. VCF files); and clinical metadata or phenotypes (e.g. phenopackets). Regardless of the type of processed data submitted in the analysis, the analysis must be associated with a Study and can reference multiple types of other objects, from samples to experiments, if they are available at the EGA. Just like with Runs, whenever a file is submitted to the EGA through an analysis object, the file MD5 checksums must be present, in order for the EGA to validate file integrity upon transfer. This also includes index files when applicable (e.g. .bai.md5 files). Ideally, any analysis that uses a reference sequence for some kind of alignment (e.g. BAM, CRAM or VCF files), would contain metadata about the alignment, such as INSDC reference assemblies and sequences, by either using accessions (e.g. CM000663.1) or common labels (e.g. GRCh37). Read alignment (BAM) Analysis XML The Analysis can be used to submit BAM alignments to EGA. Only one BAM file can be submitted in each analysis and the samples used within the BAM read groups must be associated with Samples. Descriptive bam alignments XML example True values bam alignments XML example Sequence variation (VCF) Analysis XML The Analysis can be used to submit VCF files to EGA. Only one VCF file can be submitted in each analysis and the samples used within the VCF files must be associated with Samples. Download analysis XML (VCF) Phenotype files The Analysis XML can be used to submit phenotype files to the EGA. Only one phenotype file can be submitted in each analysis and the samples used within the phenotype files must be associated with EGA Samples. Download analysis XML (Phenotype) DAC XML The DAC XML describes the Data Access Committee (DAC) affiliated to the data submission. The DAC may consist of a group or a single individual and is responsible for the data access decisions based on the application procedure described in the POLICY.XML. As with any other object, if it was already submitted to the EGA, there is no need to submit it again: you can reference an existing object within the EGA. Hence, A DAC XML does not need to be provided if your submission is affiliated to an existing EGA DAC.. Further information on DACs can be found here, and you can always contact our Helpdesk team if you have further inquiries. Descriptive dac XML example True values dac XML example Policy XML The Policy XML describes the Data Access Agreement (DAA) to be affiliated to the named Data Access Committee. Descriptive policy XML example True values study XML example Dataset XML The dataset XML describes the data files, defined by the Run.XML and Analysis.XML, that make up the dataset and links the collection of data files to a specified Policy. The dataset xml is commonly the last metadata object to be submitted, since it references multiple other entities. Please consider the number of datasets that your submission consists of. For example, a case-control study is likely to consist of at least two datasets. In addition, we suggest that multiple datasets should be described for studies using the same samples but different sequence technologies. Descriptive dataset XML example True values dataset XML example Validating and submitting your EGA Validating EGA's XMLs through Webin After you have ensured that the XMLs are properly formatted and contain all the required information. You can proceed to validate and submit your data. Use the curl command to validate your XML file: Once you have prepared your XML file and asserted you have access to Webin, you can validate your XML file programmatically against EGA's schemas using the curl command. There are multiple ways in which you can validate your XMLs. This variety has to do with the fact that: (1) there are 2 instances of Webin (test and production); and (2) that validation is a default step during submission. In other words, any time that you submit your data through Webin, it will be validated automatically before being accepted. This allows for 4 possible routes of validation, all having the same validation result: validating or submitting to either the production service or the test service of Webin. For example, directly validating a "study" object XML in the testing service (wwwdev…) would look like the following: curl -u <USERNAME>:<PASSWORD> -F "ACTION=VALIDATE" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" In this command, you would need to replace <USERNAME> and <PASSWORD> with your EGA account username and password, respectively. You would also replace <INPUT_FILE> with the path to your XML file. A mock example would look like the following: curl -u ega-test-data@ebi.ac.uk:egarocks -F "ACTION=VALIDATE" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" The validation attempt can have different results depending on the given arguments: If your XML file is valid according to EGA's schemas, you will see a message indicating that your XML file is compliant. For example, see below for our mock example, where the "success" was "true" (i.e. no validation errors found). Nevertheless, notice how the "<STUDY accession=" is empty: it is because we were simply validating, so the study did not get an accession or ID. <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="receipt.xsl"?> <RECEIPT receiptDate="2023-04-11T15:19:28.850+01:00" submissionFile="submission-EBI-TEST_1681222768850.xml" success="true"> <STUDY accession="" alias="Mock example" status="PRIVATE"/> <SUBMISSION accession="" alias="SUBMISSION-11-04-2023-15:19:28:840"/> <MESSAGES> <INFO>VALIDATE action has been specified.</INFO> <INFO>Submission has been rolled back.</INFO> <INFO>This submission is a TEST submission and will be discarded within 24 hours</INFO> </MESSAGES> <ACTIONS>VALIDATE</ACTIONS> <ACTIONS>PROTECT</ACTIONS> If there are any errors or warnings, the tool will display them, allowing you to correct them before submitting your data to EGA. For example, in the following response, it is said that the object we were trying to submit was already existing, and therefore the "success" was "false". <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="receipt.xsl"?> <RECEIPT receiptDate="2023-04-11T15:12:35.609+01:00" submissionFile="submission-EBI-TEST_1681222355609.xml" success="false"> <STUDY alias="Example!_Human Microbiome Project SP56J" status="PRIVATE" holdUntilDate="2023-03-11Z"/> <SUBMISSION alias="SUBMISSION-11-04-2023-15:12:35:576"/> <MESSAGES> <ERROR>In study, alias: "Example!_Human Microbiome Project SP56J". The object being added already exists in the submission account with accession: "ERP127584".</ERROR> <INFO>VALIDATE action has been specified.</INFO> <INFO>Submission has been rolled back.</INFO> <INFO>This submission is a TEST submission and will be discarded within 24 hours</INFO> </MESSAGES> <ACTIONS>VALIDATE</ACTIONS> <ACTIONS>PROTECT</ACTIONS> If the curl command retrieves no response at all, please double check if your username and password are correctly provided. Also notice the "ACTION=..." argument passed to the Curl command. This specifies the action to take during the call to Webin, so we do not need a "Submission" XML just for a validation attempt. See more at submission actions without submission XML. Furthermore, validation of multiple files or objects (e.g. sample, experiment, study…) can be done in a single command by adding more arguments (i.e. '-F'). For example: curl -u <USERNAME>:<PASSWORD> -F "ACTION=VALIDATE" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" -F "SAMPLE=@sample.xml" -F "DATASET=@dataset.xml" As mentioned above, beside "validate" action in the test environment, you can also validate your metadata by three other methods: "Validate" in the production server. From our example above, you simply need to take the "dev" away from the URL. curl -u <USERNAME>:<PASSWORD> -F "ACTION=VALIDATE" "https://www.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" "Add" in the development server. From our example above, you would simply need to replace the action: from "validate" to "add". Whatever is submitted to this service will be discarded in 24h, so whether something gets submitted or not would not matter in the long run. curl -u <USERNAME>:<PASSWORD> -F "ACTION=ADD" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" "Add" in the productionserver. A combination of the previous two methods, which would render this attempt into a submission. This path is just to be taken when you are sure your metadata is compliant and what you want to submit. curl -u <USERNAME>:<PASSWORD> -F "ACTION=ADD" "https://www.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" What happens after the submission of a dataset XML? Once you have completed the registration of your dataset/s please contact our Helpdesk Team to provide a release date for your study. Please note that all datasets affiliated to unreleased studies are automatically placed on hold until the authorised submitter or DAC contact contact the EGA Helpdesk for the study to be released. We strongly advise you not to delete your data until EGA Helpdesk confirms that your data has been successfully archived.
