10992 results for "fc 26 coins u7buy Visit Buyfc26coins.com Megkaptam az FC 26 érméket a garantált idő előtt. Mindig bonuszként!.HNTf"

in 26.13 milliseconds.

• Bogalusa Heart Study (BHS-BioLINCC)

  Objectives: To investigate the early natural history of cardiovascular disease in a cohort of children and young adults in a biracial, semirural community.Background: The Bogalusa Heart Study has been a long-term epidemiologic study. The investigators have identified and followed black and white participants for nearly 40 years, and have described the incidence and prevalence of biologic and behavioral cardiovascular disease risk factors from childhood through adulthood. Their participation has enabled the study to not only document differences between males and females, but also between blacks and whites. The results from the Bogalusa Heart Study have clearly documented that the genesis of atherosclerosis has its basis in childhood, and that prevention can and must begin at the early ages.The Bogalusa Heart Study had been funded over the years by the Specialized Centers of Research (SCOR) Program. The SCOR program was initiated by NHLBI in 1970 to expedite the development and application of new knowledge essential for improved diagnosis, treatment, and prevention of arteriosclerosis, hypertension, pulmonary disease, and thrombosis. In 1984 a Demonstration and Education Component was added to the parent SCOR of the Bogalusa Heart Study in order to translate the experience gained in epidemiological studies into an intervention study designed to retard the development of cardiovascular risk factors in children. Beginning in 1997, the study was supported by the cooperative agreement mechanism. Participants: The Bogalusa dataset includes 11,796 participants that attended at least one of seven cross-sectional pediatric exams and/or the 1995-96 adult examination. Subjects ranged in age from 3 to 20 years at the pediatric exams and 20-37 at the time of the adult exam. Approximately 6,000 have more than one examination constituting a dynamic cohort. Design: The initial survey in 1973-1974 was restricted to children ages 2 1/2 to 14. A physical examination was conducted and information was collected on anthropometric data, hemoglobin, blood pressure, serum lipids, and health history. Over 3,500 children participated. The second cross-sectional survey of 1976-1977 and subsequent surveys expanded the eligible population to include all children ages 5-17 years. The second survey of over 4,000 children also included information on salt intake, smoking, health beliefs, and attitudes, and for girls ages 8-17, menstrual history and oral contraceptive use. The third survey of over 3,500 participants in 1978-1979 also collected anthropometric measurements on skinfold thickness and two measurements of heart rate. The fourth survey of over 3,300 participants in 1981-1982 added data on alcohol use, Type A behavior, peer networks and dieting habits.The Bogalusa Heart Study continued to use a cross-sectional and longitudinal design with the general cross-sectional survey of approximately 3,700 Bogalusa children ages five to seventeen in 1988-1989 in the sixth screen and additional longitudinal studies to recall children in defined subgroups for more intensive evaluation. Half of the 12,000 participants screened since 1973 had been studied three or more times. The Post High School Study examined young adults ages 21 through 30 who previously were examined as children ages five through fourteen in the first Bogalusa Heart Study screening in 1973-1974. The population included approximately 4,603 young adults originally screened and any other children or adolescents examined for the first time in any subsequent surveys. The cardiovascular phenotypes include obesity, blood pressure, lipids, lipoproteins, apoproteins, homocysteine, glucose-insulin, fibrinogen, plasminogen activator inhibitor-1 and von Willebrand Factor. Environmental risk factors consist of sociodemographic characteristics, tobacco and alcohol use, oral contraception, physical activity, cognitive and physical function, and quality of sleep and diet. Subclinical morbidity includes echo-Doppler measurements of cardiac-carotid structure and function.

  Study phs004173

• How to use EGA Webin?

  EGA Webin EGA Webin serves as a platform for registering metadata for array based submissions, large scale sequence submission as well as for legacy EGA submission accounts (ega-box-XXXX). For large scale submitters of sequence data you have also the option to submit metadata via XMLS programmatic submission, while new submitters are advised to utilise the Submitter Portal for their submissions. You can request a legacy EGA submission account (ega-box-XXXX) by populating this form. Please, allow two business days for our Helpdesk team to contact you after populating this form. WEBIN actions: Register metadata for a sequence submission Register study, samples, experiments, runs, DAC, policy and dataset/s after file upload. Register components for your array-based metadata submission Register study, samples, DAC or policy before uploading files. Edit existing submission metadata Change or update previously submitted metadata. Register metadata for a sequence submission Ensure that all sequence files have been encrypted before uploading them to your submission account using the EgaCryptor. Go to the EGA Webin and log in using your submission account name (ega-box-XXX) and password. Register components of your metadata submission Study Samples Data Access Committee (DAC) Data access policy Dataset For array-base submissions: Study, Samples, Data Access Committee (DAC) and Data access policy may all be registered BEFORE file upload and dataset registration through the array-base template. Register your Study Go to the “Studies (Projects)” box Click on “Register Study” and fill in the information related to your study. Click on “Submit”, this will save the information and generate an EGA study ID. To use the study accession number in a publication, the study has to be previously released on the EGA website, we suggest the following format: "Sequence data has been deposited at the European Genome-phenome Archive (EGA), which is hosted by the EBI and the CRG, under accession number EGASXXXXXXXXXXX.Further information about EGA can be found on https://ega-archive.org and “The European Genome-phenome Archive in 202 "(10.1093/nar/gkab1059)" Register your Samples Go to the “Samples” box Click on “Register Samples” Select “Download spreadsheet to register samples” and customise your template, there is a default EGA template (EGA default checklist) but more attributes can be added if required. For the EGA default checklist, there are mandatory,recommended and optional attributes. As well custom fields which can be added if required. Mandatory attributes Field Name Description tax_id Taxonomy ID of the organism as in the NCBI Taxonomy database. Entries in the NCBI Taxonomy database have integer taxon IDs. See our tips for sample taxonomy here scientific_name Scientific name of the organism as in the NCBI Taxonomy database. Scientific names typically follow the binomial nomenclature. For example, the scientific name for humans is Homo sapiens. sample_alias Unique name of the sample. If not selected system will auto generate an unique alias sample_title Title of the sample sample_description Description of the sample phenotype *** Where possible, please use the Experimental Factor Ontology (EFO) to describe your phenotypes. Recommended attributes Field Name Description subject_id Identifier for the subject where the sample has been derived from gender * Sex Optional attributes Field Name Description sex sex of the organism from which the sample was obtained disease_site Affected organ sample type Affected organ donor_id ** Identifier of the donor where the sample has been derived from *Gender should be described as 'male', 'female' or 'unknown'. If 'unknown' due to a known sex chromosome aneuploidy, please create a user defined attribute called 'Sex chromosome karyotype' and add the appropriate value, for example, 'XXY'. **Donor id (Subject id) should be a de-identified subject handle. If unknown, please add 'unknown' to the field. ***Phenotypes should, where possible, be an Experimental Factor Ontology accession. If a term cannot be found to describe your phenotype please use free text. All sample phenotypes considered important for further analysis of the data should be provided (for example, tumour type), additional phenotype attributes can be created by defining your own attributes; use the notion 'phenotype2', 'phenotype3', etc. After you have customised the fields for the sample submission, download the template and fill in the information. Example of the sample template: Finally upload the sample template to get the EGA accession IDs for the samples. Register your Data Access Committee (DAC) Further information on the role of your DAC Go to the “Data Access” box Click on “Register Dacs” Input the information about the DAC and register at least one main DAC contact. Register your Data Access Policy Your Data Access Policy provides the terms and conditions of data use, this is also referred to as the Data Access Agreement (DAA). Completion of a DAA by the applicant/s should form part of the application process to the Data Access Committee (DAC). Go to the “Data Access” box Click on “Register Policies” Select the DAC to which this policy will be linked to and fill in the policy information. Submitting your Runs and Analyses This section is only for sequence data submission, for array-based submission it can be skipped. Please refer to our Submitting array based metadata Runs Registration Go to the “Raw Reads (Experiments and Runs)” box Click on “Submit Reads” Select “Download spreadsheet template for Read submission” Select the template corresponding to your submission type For the templates you have the option to customise the optional fields. To check their description click on “Show Description “ Download the template and fill in the required information. Example of the runs template: We recommend that Fastq, BAM, and CRAM read files are submitted using Webin-CLI When using this interface instead of Webin-CLI, raw sequences must be uploaded in one of the supported data formats before they can be submitted. The files can be uploaded using FTP or Aspera. The study and the sequenced samples must be pre-registered before the raw reads are submitted. Please note that each individual study and sample should be registered only once. You will be asked to provide information about the sequencing libraries and instruments. Submitting your Dataset This section is only for sequence data submissions, for array based submissions it can be skipped. Please refer to our Submitting array based metadata The dataset describes the data files, defined by the run (EGARXXXXXXXXXXX) and analysis (EGAZXXXXXXXXXXX) accessions that make up the dataset and links the collection of data files to a specified Data Access Committee and Data Access Policy. As a result, you must have registered your Reads and experiments, Data Access Committee (DAC) and Data access policy before submitting your Dataset. Please consider the number of datasets that your submission consists of, for example, a case control study is likely to consist of at least two datasets. In addition, we suggest that multiple datasets should be described for studies using the same samples but different sequence technologies. Please contact EGA Helpdesk for further assistance. Go to the “Data Access” box Click on “Register Dataset” Select the Data Access Committee (DAC) and Data access policy Register your dataset After submitting your dataset you should contact the EGA Helpdesk to provide a release date for your dataset. Datasets are automatically held (i.e. not released) unless they are affiliated to a study that has already been released. Edit/update existing submission metadata Go to the “Report” section of the object you would like to edit. Locate the object and click on the arrow under action. An option menu will be displayed. Objects can be edited through their XML or with the WEBIN menu. After an object has been edited, changes would be available on the website until the submission is released again. Please contact the EGA Helpdesk if you require further assistance.

  Documentation submission/metadata/submission/EGA_webin

• How to upload GPG files

  Uploading files Users that holds an ega-box-XXX account can upload files using either INBOX or FTP. Users who have a Submitter role associated with their email will only be able to upload files using INBOX. Before uploading your files please make sure that any files that will be uploaded to EGA do not use special characters in their naming convention such as # ? ( ) [ ] / \ = + < > : ; " ' , * ^ | &. This can cause issues with the archiving process, leading to problems for end users. The EGA is a shared, public service with limited storage. In order to manage the available resources, we enforce a limit of 10Tb per submission account at any one time. Please do not exceed this limit. INBOX FTP The FTP is only compatible with files encrypted using the EGACryptor tool Before uploading Once your submission files have been prepared using the EGAryptor, the resulting encrypted files and associated md5sum files can be uploaded to your submission account using Aspera or FTP. The EGA is a shared, public service with limited resources. In order to manage the available resources, EGA submission boxes should not exceed 8Tb in size, and cannot exceed 12Tb. If you are approaching this limit please contact contact EGA Helpdesk so that we can advise on how to register the associated metadata and trigger the archiving of files, so that you can continue with your submission. If we note that your submission account increases above 10Tb on a consistent base your password will be changed until metadata is associated. Aspera Download Aspera Using Aspera FTP FTP windows FTP Linux / Unix FTP client (Filezilla) FTP and TLS Troubleshooting Troubleshooting Aspera Download Aspera is a commercial file transfer protocol that may provide faster transfer speeds than ftp especially over longer distances. The Aspera ascp command line client. Please select Aspera Connect. The ascp command line client is distributed as part of the aspera connect highperformance transfer browser plugin and is free to use, without registration. The minimum required version of the IBM Aspera Cli is V4. Further instructions. Using the Aspera ascp command line program The location of the ascp program in the filesystem: Mac: on the desktop go cd /Applications/Aspera\ Connect.app/Contents/Resources/ there you'll see the command line utilities where you're going to use ascp. Windows: the downloaded files are a bit hidden. For instance, in Windows 7 the ascp.exe is located in the users home directory in: AppData\Local\Programs\Aspera\Aspera Connect\bin\ascp.exe Linux: should be in your user's home directory, cd /home/username/.aspera/connect/bin/ there you'll see the command line utilities where you're going to use ascp. Your command should look similar to this: ascp -P33001 -O33001 -QT -l300M -L- /path/file ega-box-N@fasp.ega.ebi.ac.uk:/path If you wish to upload several files without being requested the password, please use the below command : ASPERA_SCP_PASS=ega-box-password ascp -P33001 -O33001 -QT -l300M /path/file ega-box-N@fasp.ega.ebi.ac.uk:/path/ Explanation of parameters l300M option sets the upload speed limit to 30MB/s. You may wish to lower this value to increase the reliability of the transfer. L option is for printing logs out while transferring files to upload can be a file mask (e.g. '/homes/submitter/*.srf) or a list of files. ega-box-N is your submission account login. Add k2 switch for transfer restarts Check the command line transfer usage for more configuration details. Using FTP to upload your prepared files Use your preferred ftp client. For example, lftp is a popular choice for Linux and Mac users. Use binary mode for file transfers. Use ftp.ega.ebi.ac.uk as the target host. Login with your ega-box username and password. Upload files to your private ega-box upload area. Depending on your network setting you might wish to start FTP in passive or active mode. Using default FTP command line client in Windows Start the command line interpreter: press WinR, type cmd, hit enter Enter ftp ftp.ega.ebi.ac.uk Enter your submission username Enter your submission password Type binary to enter binary mode for transfer To see a list of available ftp commands type help. Type ls command to check the content of your submission account. Type prompt to switch off confirmation for each file uploaded. Use mput command to upload files: mput *.bam* Use bye command to exit the ftp client. Use exit command to exit the command line interpreter. Using default FTP command line client in Linux / Unix Open a terminal and type ftp ftp.ega.ebi.ac.uk Enter your submission username Enter your submission password Type binary to enter binary mode for transfer To see a list of available ftp commands type help. Type ls command to check the content of your submission account. Type prompt to switch off confirmation for each file uploaded. Use mput command to upload files: mput *.bam* Use bye command to exit the ftp client. Using FTP client FileZilla We recommend the use of FileZilla, a free FTP client . FileZilla is open source software distributed free of charge under the terms of the GNU General Public License. Use the following connection details (File - Site Manager) and add yoursubmission account username and password: Using FTP client FileZilla Select the files you wish to upload and then select upload: Using FTP client Filezilla Using LFTP with TLS We recommend the following to force the use of a secure connection. lftp > set ftp:ssl-force yes We also recommend setting the following for not encrypting the bulk data itself for performance reasons (theauthentication will still be encrypted): lftp > ftp:ssl-protect-data no In order to verify the certificate,the recommended way would be to use the CA certificates from your machine. To do that use this command in lftp adjusting the path to your ca-certificates location. lftp > ssl:ca-file "/etc/ssl/certs/ca-certificates.crt" If that is not possible or certificates are old and you can't update them, you can download the certificates needed from Quo Vadis Digital Repository The two certificates to download in PEM format are: QuoVadis Root CA2 G3 QuoVadis EV SSL ICA G3 Then you can concatenate them in a file one after the other and save it as lftp-certificates.pem Once this is done you have to point the ssl:ca-file variable to the path lftp > set ssl:ca-file "/path/to/lftp-certificates.pem" Also note that you can save this configuration at ~/.lftp/rc Another option is to download the certificates and add them to the ca-certificates of your machine. For example: In RHEL7 and cenots and others box the process to add the certificates globally is: Download the two certificates (in PEM or DER format, doesn't matter) and save them to "/etc/pki/ca-trust/source/anchors/" Run "update-ca-trust extract" Another less secure option is to turn off certificate verification with the following command: lftp > set ssl:verify-certificate false Troubleshooting If you are having problems with Aspera connection timeouts, it can be down to either one of the following. Transfers cannot start the connection fails instantly. Ensure that TCP traffic on port 33001 is allowed (open) for outbound connections through your computer's firewall and network's firewall. The connection is made, transfers are started, but 0 bytes (0%) are uploaded for each file. Ensure that UDP traffic on port 33001 is allowed (open) for outbound connections through your computer's firewall and network's firewal

  Documentation submission/data/uploading-files/ftp

• Single Genome Jakun Sequencing Dataset

  This dataset contains the sequencing data of a single Jakun Individual from Malaysia

  Dac EGAC50000000454

• Establishment and characterization of a new Pseudomonas aeruginosa infection model using 2D airway organoids and dual RNA sequencing

  Study EGAS00001007463

• Cancer Research UK Cambridge Institute

  A department of the University of Cambridge and Cancer Research UK funded Institute

  Dac EGAC50000000683

• Degradation of Cyclin K/CDK12 is a druggable vulnerability of colorectal cancer (H012)

  Study EGAS00001004517

• Polyomavirus-positive Merkel cell carcinoma derived from a trichoblastoma suggests an epithelial origin of Merkel cell carcinoma

  Study EGAS00001003784

• Genetic characterization of a Unique Neuroendocrine Transdifferentiation Prostate Circulating Tumor Cell - Derived eXplant (CDX) Model

  Study EGAS00001004272

• Overexpression of the miR-17-92 cluster in colorectal adenoma organoids induces a carcinoma-like genotype

  Study EGAS00001005949