10722 results for "fc coins olx Navštivte Buyfc26coins.com Podpora pro profesionální hráče a týmy..zSiZ"

in 15.08 milliseconds.

• The Role of CDX2 in Controlling ABCB1 Expression and Chemosensitivity in Human Colon Cancer

  This study reports the results of RNA sequencing (RNA-seq) experiments performed on two human colon cancer cell lines (HT-29, DLD-1) that were genetically engineered to achieve either the constitutive expression (in HT-29 cells) or the selective inactivation (in DLD-1 cells) of the transcription factor CDX2, a master regulator of embryonic gut development and a key regulator of multi-lineage differentiation in adult colon epithelial cells. Our previous studies had identified lack of CDX2 expression as a prognostic biomarker of poor prognosis and a predictive biomarker of benefit from adjuvant chemotherapy in Stage-II and Stage-III colon cancer patients (Dalerba et al., NEJM, 374:211-222, 2016; PMID: 26789870). The molecular basis of these associations, however, remained poorly understood. The present study was designed to identify which genes are under the transcriptional control of CDX2, in order to clarify their role in shaping colon cancer resistance to chemotherapy. Of the two lines included in this study, the first (HT-29) is CDX2-negative at baseline, and was infected with a lentivirus vector encoding for the cDNA of the human CDX2 gene under the control of a constitutive promoter (CMV). The second line (DLD-1) is CDX2-positive at baseline, and was infected with a series of lentivirus vectors encoding for CRISPR/Cas9 constructs designed to selectively inactivate the CDX2 gene. In both cases, infected cells were purified by fluorescence-activated cell sorting (FACS), based on the differential expression of a green fluorescent reporter (EGFP) that was also encoded by the lentivirus vectors, and transcribed in tandem with either the CDX2 cDNA (HT-29) or CRISPR/Cas9 gRNAs targeting CDX2 (DLD-1). The experiments were designed to include 3 experimental replicates per condition, and to compare the transcriptional profile of genetically engineered cells with that of autologous controls (i.e., HT-29 cells infected with an "empty" version of the same lentivirus vector used to over-express CDX2, DLD-1 cells engineered with a "non-targeting" CRISPR/Cas9 gRNA). In the specific case of DLD-1 cells engineered with CRIPSR-Cas9 constructs targeting CDX2, infected cells were sorted based on the differential expression of EGFP and then plated as single-cells, in order to sub-culture three isogenic clones, all of which were genetically sequenced to confirm bi-allelic knock-out of the CDX2 gene, and confirmed to lack CDX2 protein expression by Western blot. The results of our experiments demonstrate that, in human colon epithelial cells, CDX2 controls the expression of the ABCB1 efflux pump, by positively regulating the transcription of the corresponding gene.

  Study phs002903

• Genome-Wide Association Studies of Prematurity and Its Complications (African American)

  Preterm delivery resulting in the birth of a premature infant is a complex problem with a devastating impact on individuals, families and society. The prevalence of preterm birth has increased steadily in developed countries over the last 20 years and more than three million children die of preterm birth worldwide each year. Despite the importance of the problem and its disproportionate occurrence in poor and minority populations, the underlying causes have been difficult to identify. Spontaneous preterm labor has as its suspected triggers infection, stress, poor nutrition and inherited factors. The single best predictor for preterm delivery is a previous preterm birth. Studies of twins and of recurrences within families provide evidence that genetic factors underlie a substantive component of the risk for prematurity. One major challenge in studying genetic factors in prematurity is that the risk case is not truly established. The genetic risk could reside either in the mother and her uterus or in the infant/placenta. Identification of genetic factors in the mother and/or infant could provide insights into identifying relevant environmental covariates that may be more amenable to rapid interventions but difficult to find using standard epidemiology alone. A comprehensive genome-wide association study (GWAS) is the ideal way to identify those genes that would not be suspected based on our current understanding of the biology of parturition. We are using 2200 African American samples with term or preterm labor. A subset of these (~800) are infant samples recruited by the Neonatal Research Network as part of a study on cytokines and infection in extremely low birth weight infants (Schelonka RL, et al., 2011. PMID: 21145756). Therefore, this group consists of infants <1,000 grams with clinical outcome data for the infant allowing study of the genetic contributors for not only preterm birth but also the complications that often accompany preterm birth. The result will enable a better understanding of the biology of parturition and suggest environmental modifications that can prolong gestations to improve neonatal and adult outcomes. This study is part of the Gene Environment Association Studies initiative (GENEVA, http://www.genevastudy.org) funded by the trans-NIH Genes, Environment, and Health Initiative (GEI). The overarching goal is to identify novel genetic factors that contribute to preterm birth through large-scale genome-wide association studies of African-American cases and controls from multiple sites in the United States. Genotyping was performed at the Johns Hopkins University Center for Inherited Disease Research (CIDR). Data cleaning and harmonization were done at the GEI-funded GENEVA Coordinating Center at the University of Washington.

  Study phs000353

• A Clone's Genomic Stability as a Biomarker of Its DNA-Damage Resilience

  A main problem in the treatment of advanced cancers, including gastric cancers and glioblastoma, is the incertitude at which we predict how individual patients will respond to DNA-damaging agents, especially on the long run. Knowing the mechanism behind a patient's response, or the lack thereof, will help us depart from the oversimplified “more-is-better” and “one-size-fits-all” principles according to which DNA-damaging agents are administered. This will improve clinical outcome by allowing us to pinpoint those who would respond better and longer to lower doses than to higher doses of DNA-damaging agents. Under the assumption that the success of DNA-damaging therapy increases with the proliferation rate of a relatively homogeneous tumor population, there was little reason to assume anything other than monotonic dose-response relations. With the recent paradigm shift that most cancers are in fact DNA mosaic products of ongoing evolution, comes the urgency to reconsider these fundamental principles behind DNA-damaging therapy administration. As the developers of one of the first DNA deconvolution methods and with access to technologies to profile the transcriptomes of up to 10,000 cells simultaneously, we are equipped to embark on first personalized dose-finding strategies for DNA-damaging therapies. We will test the potential of the very long-term legacy that DNA-damage entails on a cell “genomic instability” as new biomarker of DNA-damage response. Our preliminary studies showed that, for most cancer types, DNA-damaging agents change a clone's genomic instability and that clones succumb to a limit in the amount of genomic instability they can tolerate. In particular, our results showed that patients with intermediate genomic instability have a very poor outcome and that this relation is only evident among treatment-naive patients, but not among patients treated with DNA-damaging agents. Further they show that we can measure genomic instability per clone and that clones with extreme genomic instability typically don't grow large. Our hypothesis that genomic instability, rather than proliferation rate, determines how sensitive a tumor is to DNA-damaging agents on the long-term, is founded on two unexpected findings. Patients with extremely high genomic instability per tumor clone have an exceptionally good outcome. Aim 1 will integrate exome- and single cell RNA-Seq (scRNA-Seq) data to characterize clones and to measure how much genomic instability they can tolerate. Low genomic instability is associated with reduced benefit from DNA-damaging agents. Aim 2 will use comet assays and treatment history to quantify DNA damage per clone, relating it to the clones' ability to tolerate DNA damage and to changes in the genomic instability of therapy-surviving clones.

  Study phs003762

• A Phase I Study of the Treatment of Recurrent Malignant Glioma with CAN-3110 (AKA rQNestin34.5v.2), a Genetically Engineered HSV-1 Virus

  This study is a "first-in-human" phase 1 trial of recurrent, IDH wild-type glioblastoma (rGBM) patients treated with CAN-3110 (aka rQNestin34.5v.2), a genetically modified oncolytic herpes simplex virus 1 (HSV-1). The study was a 3+3 dose-escalation study starting at a single intra-tumoral injection of 106 PFU CAN-3110 going up to 1010 PFU in half-log increments (cohorts 1-9). An expansion cohort (cohort 10) was treated with 109 PFU injected into up to 5 sites within a single tumor. Principal findings of the study conclude that:CAN-3110 was safe at all tested doses (no dose-limiting toxicities reached)HSV-1 seropositive patients survived significantly longer than HSV-1 seronegative patients in this study - longer than expected based on historical rGBM controlsHSV-1 seropositive patients were significantly more likely to clear CAN-3110 (HSV-1) antigen from their tumors based on immunohistochemical stainingCAN-3110 treatment-induced CD8+/CD4+ T-cell recruitment to injected tumor sites altered TCR beta diversity in both tumor infiltrating leukocytes (TILs) and PBMCs, and initiated changes in specific TCR beta clonotypes and immune gene signatures which were associated with post-treatment survival.Data provided in dbGaP for this study include:Bulk RNA-Seq data for 13 pre/post-treatment pairs of rGBM tumors corresponding to 12 unique patients (patient 28 was treated with CAN-3110 at two different timepoints). This data is provided as raw sequencing reads (.fastq), kallisto pseudoalignment transcript-level read counts (abundance.tsv files), gene-level abundance matrix (Gene_Level_Expression_Matrix.tsv), and immune gene signature scores matrix (Immune_Gene_Signatures_Matrix.tsv). Sequencing was performed as paired 150bp sequencing on NovaSeq6000 S4 Illumina flow cells. Library preparation varied by batch as described in the included RNAseq_Metadata.xlsx table.TCR beta DNA sequencing performed by Adaptive Biotechnologies for 21 pre/post-treatment pairs of rGBM tumors and PBMCs representing 20 unique patients (patient 28 was treated with CAN-3110 at two different timepoints). Note that all tumor pairs with TCR beta sequencing data also have available bulk RNA-Seq data. The TCR beta sequencing data is provided as an excel spreadsheet (TCRbeta_Sample_Overview.xslx), which provides a broad level summary of the sequencing on a per-sample basis (# of TCRbeta templates, T cell fraction, TCR beta diversity metrics, etc.) and as a large tab separated value file (Full_TCRbeta_Rearrangement_Details.tsv), which provides information per sample at the level of each unique TCR beta sequence (amino/nucleic acid sequence, VDJ gene usage, etc.).An excel table of de-identified metadata for the patients involved in this study.

  Study phs003378

• Providing safe access to sensitive human data across borders: Federated EGA becomes a reality

  Enabling discovery and access to sensitive data across national boundaries is vital for improving human health. It enables more powerful and efficient research by increasing the volume and diversity of data available for analysis. It allows us to better understand the causes of diseases – cancer, rare diseases, infectious diseases like COVID-19 – and develop new medicines and treatments. Sensitive human omics data are typically generated by research initiatives and shared using specialist repositories which provide services for data submission, discovery, and access. The EGA is one such repository. Established in 2008 at EMBL’s European Bioinformatics Institute (EMBL-EBI) in the UK, since 2012 the EGA (“Central EGA”) has been jointly managed by EMBL-EBI and the Centre for Genomic Regulation (CRG) in Spain. Many countries have emerging personalised medicine programmes which generate data from national initiatives. These programmes are driving a transition in human genomics from being research-driven to receiving funding through healthcare. Data generated in a clinical context are subject to stricter governance than research data and must follow national data protection legislation. To solve these challenges, the Federated EGA provides a network of connected resources to enable transnational discovery of and access to human omics data for research, while also respecting jurisdictional data protection regulations. In this way, the Federated EGA infrastructure supports the goals of European initiatives such as the 1+ Million Genomes initiative (1+MG), the European Health Data Space, and a number of EU-funded 1+MG implementation projects including Beyond 1 Million Genomes. The Federated EGA is made up of “Nodes” – typically nationally funded and operated – which store and manage data locally while allowing global discovery within the Federated EGA network. Since 2016, multiple parallel efforts, supported by ELIXIR and other transnational and national initiatives, have created technical and legal frameworks for establishing the Federated EGA. In 2022, the first five Nodes – Finland, Germany, Norway, Spain, and Sweden – officially joined the Federated EGA by signing Federated EGA Collaboration Agreements with Central EGA. The Finnish FEGA Node is operated by CSC - IT Center for Science and provides data management services according to national laws and the requirements of the EU General Data Protection Regulation (GDPR). These services provide tools and support for the whole life-cycle of sensitive research data from collating to analysis, publication, and authorised re-use. The development of the services has been a joint effort with the other Nordic nodes within NeIC's Tryggve and Heilsa projects, and funded by Finnish Ministry of Education and Culture and projects coordinated by ELIXIR Finland. Read more about Finnish FEGA signing. The German Human Genome-Phenome Archive (GHGA) strives to provide a national infrastructure as well as an ethical and legal framework that balances FAIR omics data usage and data protection needs for Germany. As a Germany-wide consortium funded by the German Research Foundation under the umbrella of the NFDI association, GHGA combines the expertise of 21 universities and research institutions to form a federated national infrastructure. Read more about GHGA signing. The German Human Genome-Phenome Archive (GHGA) strives to provide a national infrastructure as well as an ethical and legal framework that balances FAIR omics data usage and data protection needs for Germany. As a Germany-wide consortium funded by the German Research Foundation under the umbrella of the NFDI association, GHGA combines the expertise of 21 universities and research institutions to form a federated national infrastructure. Read more about GHGA signing. In Norway, a key component of the infrastructure is the services of The Sensitive Data Service (TSD) offered by USIT at University of Oslo. The Federated EGA Norway Node is developed by ELIXIR Norway and operated by the University of Oslo as the responsible legal entity. Core software modules are developed jointly with the other Nordic nodes in the NeIC Tryggve and Heilsa projects. Read more about FEGA Norway signing. The Spanish FEGA (es-FEGA) is a national service for storing sensitive biomedical data in Spain. Supported by the Spanish Institute of Bioinformatics (INB) in collaboration with Central EGA, sensitive research datasets are primarily hosted at the Barcelona Supercomputing Centre facilities. The Swedish Sensitive Data Archive is a secure data archive and sharing platform for sensitive datasets. It was developed by the National Bioinformatics Infrastructure Sweden (NBIS) in collaboration with other Nordic ELIXIR Nodes through the Tryggve and Heilsa projects funded by NeIC and coordinated with Central EGA through ELIXIR. Read more about the Swedish Node signing. The Swedish Sensitive Data Archive is a secure data archive and sharing platform for sensitive datasets. It was developed by the National Bioinformatics Infrastructure Sweden (NBIS) in collaboration with other Nordic ELIXIR Nodes through the Tryggve and Heilsa projects funded by NeIC and coordinated with Central EGA through ELIXIR. Read more about the Swedish Node signing. By providing a solution for secure and efficient management of human omics data, the Federated EGA aims to foster data reuse, enable reproducibility, accelerate biomedical research, and improve human health. Find out more Interested in setting up your own Federated EGA Node? Check out the FEGA Onboarding Knowledge Base for more information. The ELIXIR Federated Human Data Community is a great entry point for anyone interested in learning more about the Federated EGA. You can: Join the ELIXIR Federated Human Data Community mailing list (select “Human Data”) Attend the ELIXIR Federated Human Data Community calls

  Blog safe-access-to-sensitive-human-data-federated-ega

• Sporadic autism exomes reveal a highly interconnected protein network of de novo mutations

  It is well established that autism spectrum disorders (ASD) have a strong genetic component; however, for at least 70% of cases, the underlying genetic cause is unknown. Under the hypothesis that de novo mutations underlie a substantial fraction of the risk for developing ASD in families with no previous history of ASD or related phenotypes-so-called sporadic or simplex families-we sequenced all coding regions of the genome (the exome) for parent-child trios exhibiting sporadic ASD, including 189 new trios and 20 that were previously reported. Additionally, we also sequenced the exomes of 50 unaffected siblings corresponding to these new (n = 31) and previously reported trios (n = 19), for a total of 617 individual exomes from 209 families deposited in dbGaP. Here we show that de novo point mutations are overwhelmingly paternal in origin (4:1 bias) and positively correlated with paternal age, consistent with the modest increased risk for children of older fathers to develop ASD. Moreover, 39% (49 of 126) of the most severe or disruptive de novo mutations map to a highly interconnected beta-catenin/chromatin remodelling protein network ranked significantly for autism candidate genes. In proband exomes, recurrent protein-altering mutations were observed in two genes: CHD8 and NTNG1. Mutation screening of six candidate genes in 1,703 ASD probands identified additional de novo, protein-altering mutations in GRIN2B, LAMC3 and SCN1A. Combined with copy number variant (CNV) data, these results indicate extreme locus heterogeneity but also provide a target for future discovery, diagnostics and therapeutics.

  Study phs000482

• Case Report: Pre-Clinical Combination Targeting VEGF and PI3K in a Rare, Aggressive Mixed Endometrial Carcinoma

  We report a rare case of a young patient (VENUS 167) initially diagnosed with grade 1 endometrioid endometrial cancer, which, following endocrine treatment, presented with mixed aggressive carcinoma with three distinct histologic patterns: grade 1 endometrioid, large cell neuroendocrine, and undifferentiated carcinoma. The surgical specimen at the time of disease progression was used to establish OPTO.85, a patient-derived organoid (PDO), followed by a corresponding organoid-derived xenograft (ODX). Multi-omic analyses confirmed that OPTO.85 accurately reflected the patient’s tumor characteristics. WES analysis identified oncogenic alterations in PIK3CA, ARID1A, and CTNNB1. Further RNA-seq and ATAC-seq analyses revealed enrichment in VEGF and Wnt signaling pathways, suggesting therapeutic vulnerabilities. A high-throughput drug screen was conducted using ApexBio-Approved and Epigenetic Drug Libraries, along with Kinase Inhibitor and Tool Compound Libraries developed at the Ontario Institute of Cancer Research. The OPTO.85 PDO exhibited sensitivity to PI3K inhibitors and responsiveness to VEGF inhibition. Cediranib demonstrated synergy with BKM120, significantly reducing organoid growth. This combination also showed in vivo efficacy in the ODX model, where dual inhibitors significantly suppressed tumor growth compared to single compounds. This case exemplifies the impact of genomic profiling and patient-derived models in identifying actionable molecular changes in rare cancers with limited therapeutic options and poor prognosis. It highlights that high-throughput sequencing for individual patient tumors and generation of patient-derived models are feasible in endometrial cancer. This preclinical model may assist clinical decision and personalized therapy requiring validation in prospective studies.

  Study EGAS50000001665

• Analysis of the Elements Involved in the Enrichment of a Panel of Genomic Regions by Nanopore Sequencing Using Adaptive Sampling

  DNA sequencing using nanopore technologies with the affordable MinION device is useful for the identification and characterization of structural variants, long haplotypes, sequencing of repetitive regions and identification of epigenetic modifications. The main limitation of this approach is the low coverage obtained, which might be avoided by adaptive sampling, a computationally controlled method of enrichment for targeted genomic regions. This study dissects the factors involved in the enrichment by adaptive sampling of a panel of 18 human genome regions containing 20 genes implicated in breast cancer sequenced in 16 patients with familial breast cancer negative for NGS screening. An average coverage of 2.0x was obtained for the whole genome and 5.1x for selected regions. Sequencing time was the main factor improving coverage. The selection of long reads (>1 Kb) did not improve the enrichment. The length of the selected region, which in our study ranged from 126 to 565 Kb, did not play a significant role in enrichment. However, the region containing PMS2 showed significantly lower coverage, which could be explained by the high number of PMS2 pseudogenes (N = 14), which were also enriched. Our study shows new evidence of enrichment obtained by adaptive sampling in a panel of genomic regions and shows parameters, the relevance of sequencing time and the role of pseudogenes, that improve the enrichment yield with no library reloading or GPU use, data useful for a more efficient application of this procedure in future studies.

  Study EGAS00001007375

• How to upload Crypt4GH files

  Uploading files Users who hold an ega-box-XXX account can upload files using either INBOX or FTP. Users who have a Submitter role associated with their email will only be able to upload files using INBOX. Before uploading your files, please make sure that any files that will be uploaded to EGA do not use special characters in their naming convention, such as # ? ( ) [ ] / \ = + < > : ; " ' , * ^ | &. This can cause issues with the archiving process, leading to problems for end users. The EGA is a shared, public service with limited storage. To manage the available resources, we enforce a limit of 10TB per submission account at any one time. If you exceed this limit, a “permission denied” message will be displayed. This will prevent you from uploading more files, but connecting to your inbox.For submissions larger than 10TB, please perform uploads in 10TB batches: register all the metadata and then finalise the submission. Upload the next batch of files and repeat the same metadata registration and finalisation process until you have completed the file upload. Further information can be found in the SP documentation. INBOX FTP The INBOX is only compatible with files encrypted using the Crypt4gh tool Before uploading If you are not a registered EGA user, you will first need an EGA user account. Please note that it may take a few days for your account to be activated, as it needs to be vouched for by the EGA Helpdesk. Once your account is validated, you will be able to request a submitter role. [Optional] Meanwhile, you can create and add your public key to your EGA account profile. This option is not available for old submission accounts (e.g., ega-box-NNN). As soon as you have been granted a submitter role, you will be able to connect with your username and password to the EGA inbox using the SFTP protocol. If you have also registered a public key in your profile, you can also connect using this key. To upload files to your account, you can use the graphical user interface (GUI) or the command line. Graphical User Interface (GUI)We recommend using FileZilla, a free, open-source FTP client. However, you can use any other GUI that allows connecting over the SFTP protocol. For FileZilla as your GUI, follow these steps to upload files: Create a new connection in Site Manager (File > Site Manager) and select the following options (Figure 1): Protocol: SFTP - SSH File Transfer ProtocolHost: __EGA_INBOX_DOMAIN__Logon Type: Key fileUser: your EGA usernameKey file: Path/to/your/private_keyFigure 1: Process of establishing a new connection to __EGA_INBOX_DOMAIN__ using a key file as the logon method in FileZilla. The figure showcases the FileZilla version 3.52.2 operating on IOS v11.2.3. By following the depicted steps, users can create a secure and efficient connection to the inbox, ensuring seamless data transfers.Click Connect, and you will log in remotely to your home directory. You can think of this folder as a storage "in the EGA cloud" in which you will add your files for the EGA. The uploading area has three folders:To-encrypt: Files uploaded in this folder will be encrypted automatically on the fly.Encrypted: Files uploaded in this folder must already be encrypted with Crypt4gh. Upload your files here if your connection is unstable or you have problems completing the upload into-encrypt.Etc: This folder contains two files that allow the server to show you your username and group instead of some internal numbers. Please do not upload files here; otherwise, you will obtain a permission denied error. Find the files you want to upload by browsing your local storage (left side of your screen in FileZilla). Select all the files you want to upload, then right-click on them and select Upload (Figure 2). Figure 2: Step-by-step process of manually uploading files to __EGA_INBOX_DOMAIN__ using FileZilla, with FileZilla version 3.52.2 operating on IOS v11.2.3. The figure demonstrates how users can transfer data from their local storage to the "EGA cloud" by following the depicted steps Please note that regardless of which folder you upload your files in, both folders (to-encrypt, encrypted) will point to the same path (/) (Figure 3). Therefore, you will see your files in both folders. Figure 3: Both folders, to-encrypt and encrypted, point to the same path (/)" If your connection is unstable, please encrypt your files first using Crypt4gh. Then upload them to the ‘encrypted’ folder. The example above shows how to connect to __EGA_INBOX_DOMAIN__ using the private key. However, if you prefer to log in using your credentials, you can do so. Please go to the Frequently Asked Questions (FAQs)  for more information. SFTP command line To upload files securely to your private area of the EGA, you can use SFTP(Secure File Transfer Protocol) with your favorite FTP client. Here's what you need to know to get started: Connect to the target host __EGA_INBOX_DOMAIN__. This is the new hostname for the EGA SFTP service. Log in with your EGA username and key files (or password). Upload files to your private EGA inbox to ensure that only you can access the files. By following these steps, you can securely upload your files to the EGA for safe storage and sharing. Using the SFTP command line client in Linux/Unix Open a terminal and type sftp username@hostnameEnter your EGA passwordTo see a list of available SFTP commands, type helpsftp> put – Upload filesftp> get – Download filesftp> cd path – Change remote directory to ‘path’sftp> pwd – Display remote working directorysftp> lcd path – Change the local directory to ‘path’sftp> lpwd – Display local working directorysftp> ls – Display the contents of the remote working directorysftp> lls – Display the contents of the local working directoryType the "put" command to upload files. For example: put *.bamUse the bye command to close the connection (SFTP session). After uploading- Once you have uploaded files to the inbox, please bear in mind that the checksum needs to be calculated, which can take up to two days. You will only be able to link your files to a run/analysis once the encrypted checksum has been calculated.- When linking your files to the 'Run' or 'Analysis', ensure that the file name matches the file path '/name' in the INBOX folder.- Please delete the files from your SFTP INBOX after all the runs/analyses have been registered and files are ingested (SP > Files > Files ingested). This will clear your inbox space an allow you to upload more files. This will also prevent the files from reappearing in your Submitter Portal inbox. Frequently Asked Questions Specific to the inbox What username should I use to log in to my inbox? The authentication process for logging in to the EGA website, as well as accessing your inbox and outbox, requires the use of your username.  If you have forgotten your registered username, please contact our Helpdesk team for assistance. How are checksums calculated in your inbox? If you encrypt the file beforehand and upload it to the "encrypted" folder, the unencrypted checksum will not be calculated until the file is ingested (i.e., until it is used in a run/analysis). If the file is uploaded to the "to-encrypt" folder, then both checksums are calculated.Please bear in mind that after files have been uploaded to the inbox, the checksum must be calculated, which can take from a few hours to two days.  Specific to using keys to authenticate Can I access one EGA account from different devices? Yes, you can access your account from different devices by linking several public keys to your EGA account. Each device can generate a unique public-private key pair, and the corresponding public keys can be linked to the same account. This way, you can use different public keys on different devices and still have access to the same account and data. I have several keys and I don't remember which one is which When generating SSH keys, it's a good practice to add a comment using the -C flag. This will allow you to add a descriptive tag to your key, making it easier to identify later on. Here's an example command that generates an SSH key with a comment: ssh-keygen -t ed25519 -C work-pass In this example, we're generating an ed25519 SSH key with the comment work-pass. Once you have multiple keys with different comments, you can use the comments to easily identify each key. To view the comments for your existing SSH keys, you can use the following command: ssh-keygen -l -f /path/to/key This will display the key fingerprint and the associated comment. By checking the comments, you should be able to identify which key is which. What if I can't find my SSH keys for uploading files with a key file, and how can I use new keys? If you can't find your SSH keys, don't worry - you can make new ones. To do this, open your terminal or command prompt and type a command to make a new SSH key. You can pick a name for the key, and choose a password to keep it safe. After making the key, you can add the new key to your account or server where you want to upload files using the key file. This usually involves copying and pasting the key's "public" (e.g. file.pub) part to the right place. If you lose track of the key again, just make a new one and add it again. Keep in mind that SSH keys belong to you and your computer, so if you switch computers or accounts, you'll need to make new keys. I don't want to type the passphrase every time I use the key. What can I do? You can use an ssh-agent to avoid typing the passphrase every time you use the key. An ssh-agent is a program that stores your private keys in memory and provides them to ssh when needed. You can add your key to the ssh-agent using the command ssh-add followed by the path to your key file.Here's an example of the steps to follow: Open a terminal window.Start the ssh-agent by typing the command eval $(ssh-agent).Add your key to the ssh-agent by typing the command ssh-add [key filepath]. For instance, if your key file is located in the home directory with the name mykey, the command will look like this: ssh-add ~/mykey After adding your, key to the ssh-agent, you should be able to use ssh without having to enter your passphrase every time. Can I use my password for authentication (without my private key)? If you prefer to use your username and password for authentication instead of your private key, you can still do so. When using a Graphical User Interface (GUI) such as FileZilla, you can select Ask for password as your Logon Type (Figure 3). This option will prompt you to enter your password when you click Connect, instead of using your private key. Figure 3: This option will prompt you to enter your password when you click "Connect", instead of using your private key. Figure 3: Process of establishing a new connection to __EGA_INBOX_DOMAIN__ using your password as the logon method in FileZilla. The figure showcases the FileZilla version 3.52.2 operating on IOS v11.2.3. By following the depicted steps, users can create a secure and efficient connection to the inbox, ensuring seamless data transfers. It's worth noting that using a password for authentication can be less secure than using an SSH key, as passwords can be more easily compromised through various means. However, if you choose to use your password for authentication, selecting "Ask for password" as your Logon Type is a good way to do so securely via a GUI. Why is it better to use my key and not my password? SSH keys for authentication is generally considered to be more secure and convenient than using passwords. SSH keys are more difficult to crack than passwords, and they can be restricted to specific users and machines, giving you more control over access. Once you set up your SSH keys, you can use them to authenticate quickly and easily, without having to enter a password every time. This makes automation of tasks, such as uploading encrypted files, much simpler. Additionally, SSH keys provide better logging, allowing you to keep track of who is accessing your systems and when. All in all, using SSH keys is a good practice for improving security and convenience in your authentication process.

  Documentation submission/data/uploading-files/inbox

• The complex SNP and CNV genetic architecture of the increased risk of congenital heart defects in Down syndrome

  Here we aimed to contribute to the description of the genetic architecture of Congenital heart defect (CHD) in Down syndrome (DS), and report the results of a genome-wide association study using samples from DS individuals with and without CHD. CHD is a common developmental defect of DS occurring in 40% of cases. This case-control GWAS includes 187 DS with CHD as cases, and 151 DS without CHD as controls.

  Study EGAS00000000129