17128 results for "free coins in fc 26 Visit Buyfc26coins.com for latest FC 26 coins news..xwWa"

in 19.73 milliseconds.

• A Study to Assess the Cardiovascular, Cognitive, and Subjective Effects of Atomoxetine in Combination with Intravenous Methamphetamine

  The Study to Assess the Cardiovascular, Cognitive, and Subjective Effects of Atomoxetine in Combination with Intravenous Methamphetamine started in 2007 and ended in 2011. It was a small pilot study that included methamphetamine abusing individuals and healthy control participants aged 18-50 years. Participants who qualified over the telephone were scheduled to visit the London Laboratory at the UCLA Semel Institute for Neuroscience and Human Behavior for the In-Person Screening Phase. The screening procedures, usually scheduled over two visits, determined if participants were eligible to complete the subsequent study visits. Both groups completed identical screening procedures, including a SCID diagnostic interview to rule out any major psychiatric disorders. Methamphetamine users also answered questionnaires specific to their drug use. Urine toxicology for marijuana, opiates, cocaine, methamphetamine, and benzodiazepines were monitored at the beginning and throughout the study. Additionally, participants had blood samples to test for Rapid Plasma Reagin (exposure to syphilis), purified protein derivative (PPD), HIV and Hepatitis-C (HCV). Positive test results were relayed by a study physician and resulted in termination from continuing in the study. The inpatient portion of the study lasted a total of 24 days. To confirm compliance with abstinence from illicit and prescription drug use for the duration of the study, urine and breath alcohol testing was performed for both inpatient (methamphetamine users) and outpatient (healthy control) groups. Each subject was randomized to receive either atomoxetine (80 mg daily) or placebo. During inpatient days of the study, a study physician oversaw research subjects daily and experimental procedures were conducted in the General Clinical Research Center (GCRC). During drug administration sessions, heart rate and blood pressure were assessed at frequent intervals. Experimental sessions lasted around three hours and were conducted at approximately the same time of day for a given participant. Lunch was provided to participants at 11:30am with the prohibition of caffeine on study days involving methamphetamine administration. Participants were provided with smoke breaks as needed to assure that acute nicotine withdrawal did not negatively impact performance on cognitive testing. The following outlines the day to day procedures for a methamphetamine inpatient: Phase I Inpatient Study (15 days total) Days 1-3: On the day of admission, participants received blood tests and an EKG in order to determine that they had no occult medical conditions which would make their participation in the study medically contraindicated. A three day washout period was provided at the beginning of the study to establish an appropriate methamphetamine-free baseline for testing. Days 4-6: Participants completed cognitive test batteries to assess inhibitory control including self-report measures and cognitive testing, as well as up to three MRI scanning sessions. Day 7: On day 7, at 9AM and 1PM, participants received methamphetamine in a single-blinded condition. It was administered as two IV infusions of 15mg separated by a 60min break. The total dose of IV methamphetamine was 30mg. Participants were clinically evaluated by continuous cardiac telemetry, serial EKG and measurement of vital signs, during and after infusions, in order to determine the medical safety of methamphetamine infusion in the absence of study medication. Day 8: On day 8 we evaluated the safety and residual effects of the methamphetamine administered on the previous day. Days 9-10: After demonstrating medical and psychiatric stability of the initial methamphetamine infusion, participants were then randomized to receive placebo or atomoxetine (0 or 40mg) under double-blind conditions, which would be given at 8AM on both study days. Days 11-12: On days 11 and 12, participants remained in the GCRC and took two doses of test compound atomoxetine (0 or 40mg) at 8AM and 8PM. On the morning of day 12, participants completed a series of cognitive testing. Day 13: On day 13, participants remained in the GCRC, and took two doses of the test compound atomoxetine (0 or 40mg) at 8AM and 8PM. At 9AM and noon, they received methamphetamine under double-blind conditions administered non-contingently as two infusions of 0 or 15mg by IV (intravenously), with each infusion separated by 60min. The total dose of IV methamphetamine that each participant received was 30mg. As before, participants were clinically evaluated by continuous cardiac telemetry, serial EKG and measurement of vital signs, during and after infusions, in order to determine the medical safety of methamphetamine infusion in those participants receiving study medication. Day 14: On day 14 at 8AM, participants received their final dosing of the first test compound (atomoxetine 0 or 40mg). At 9AM and 1PM, participants selected between methamphetamine infusion or money using double-blind conditions in a multiple-choice self-administration paradigm. Participants were able to take up to two infusions of 0 or 15mg of methamphetamine, separated by 60min. The total dose of IV methamphetamine that each participant received on day 14 was 30mg. Participants were clinically evaluated by continuous cardiac telemetry, serial EKG and measurement of vital signs, during and after infusions, in order to determine the medical safety of methamphetamine infusion in those participants receiving study medication. At 5pm on day 14 discharge laboratory studies were drawn. Day 15: On day 15, a final EKG was performed as well as a review of discharge laboratory studies, including review of the EKG and continued medical and psychiatric stability. Upon clearance from a physician, participants were discharged on day 15. Participants spent at least 2 weeks (14 days) out of the hospital prior to returning to the UCLA GCRC for inpatient Phase II. Phase II Inpatient Study (9 days total) Day 1-2: On the day of re-admission, participants received blood tests and an EKG. A two day washout period was provided at the beginning of the study to establish an appropriate methamphetamine free condition for safe administration of the second test compound condition. Days 3-4: On days 3 and 4, given medical stability, participants were then switched to the opposite test compound (atomoxetine 0 or 40mg) under double-blind conditions, in the same manner as in Days 9-10 in Phase I. Days 5-6: Same procedure as in Days 11-12 in Phase I but with opposite medication condition. Day 7: Same procedure as in Day13 in Phase I but with opposite medication condition. Day 8: Same procedure as in Day14 in Phase I but with opposite medication condition. Day 9: Same procedure as in Day14 in Phase I but with opposite medication condition. For healthy control participants, the study consisted of 30 days or fewer of out-patient testing. Healthy control participants had an extensive screening, including a history and physical exam performed by a study physician, an EKG, and laboratory studies performed to assess for medical or psychiatric conditions. Control participants meeting criteria were invited back to UCLA to undergo cognitive testing, and some participants received fMRI scans. Participants were required to refrain from illicit and prescription drug use for the duration of the study, which was confirmed with urine toxicology and breath alcohol level testing on examination days. Caffeine was restricted on study days for least 2 hours prior to cognitive testing and MRI scans. Participants were permitted to drink their normal daily intake of caffeine, given the caveat above. On study days, cigarette smoking was permitted to match conditions used with methamphetamine users. The incorporation of smoke breaks during the test day assured that acute nicotine withdrawal did not negatively impact performance on cognitive tests or neuroimaging. The following outlines procedures for healthy control participants: For normal controls, participation involved one day of outpatient screening, and one day of baseline cognitive testing and possible MRI scans. After these procedures were completed, participants were randomized to the first test compound (atomoxetine 40mg or placebo), to be taken once daily in the morning for 2 days. It was then increased to twice daily for the next 3 days, followed by a final dose (40mg or placebo) on the sixth day of study medication. Participants were also asked to bring their pill packages to assess compliance with the study medication. Additionally, control participants completed a series of repeated-measures cognitive testing (on placebo or atomoxetine, respectively) and possibly two fMRI sessions (separated by a short break). After at least a four-day washout period, control participants were instructed to start the opposite test compound (atomoxetine 40mg or placebo), again to be taken once daily in the morning for two days, then twice daily for 3 days, reaching the final dose (40mg or placebo) of the second test compound in the morning. Participants were again asked to bring their pill packages to assess compliance and had blood drawn to assess atomoxetine levels. Control participants then completed another series of cognitive testing and fMRI testing sessions. They were subsequently discharged from the study. Normal control participants returned two weeks after completion of both study phases in order to complete assessments to their physical and psychological status following treatment.

  Study phs001195

• The British Autozygosity Populations BioResource (2022-04-26)

  This data set contains whole exome sequences of individuals from 8086 (mostly British Pakistani/British Bangladeshi, mostly self-reported parentally related) individuals from the following studies: 1. 5236 British Pakistani/British Bangladeshi adults from East London Genes & Health, now known as Genes & Health 2. 2624 British South Asian mothers from Born in Bradford (mostly Pakistani) 3. 1061 British South Asian adults from Birmingham (mostly Pakistani) This dataset contains all the exome sequence data available for this study on 2022-04-26

  Dataset EGAD00001008736

• Non-muscle Invasive Bladder Cancer Molecular Subtypes Predict Differential Response to Intravesical Bacillus Calmette-Guérin

  The recommended treatment for patients with high-risk non-muscle invasive bladder cancer (HR-NMIBC) is tumor resection followed by adjuvant Bacillus Calmette-Guérin (BCG) bladder instillations. However, only 50% of patients benefit from this therapy. In case of progression to advanced disease, patients must undergo a radical cystectomy with significant morbidity and have a poor clinical outcome. Identifying tumors least likely to respond to BCG can translate into alternative treatments, such as early radical cystectomy or novel targeted or immunotherapies. Here we present molecular profiling of 132 BCG-naive, HR-NMIBC patients, and 44 post-BCG recurrences (34 matched), which uncovered three distinct BCG Response Subtypes (BRS1-3). Patients with BRS3 tumors have reduced recurrence and progression-free survival compared to BRS1-2. BRS3 tumors expressed high EMT-basal markers and had an immunosuppresive profile, which was confirmed with spatial proteomics. Tumors which recurred post-BCG were enriched for BRS3. BRS stratification was validated in a second cohort of 151 BCG-naive HR-NMIBC patients and the molecular subtypes outperformed guideline recommended risk stratification based on clinicopathological variables. For clinical application, we validated that a commercially approved assay was able to accurately predict BRS3 tumors (AUROC 0.86). Our findings provide a potential clinical tool for improved identification of HR-NMIBC patients at the highest risk of progression, which can be used to select patients for early radical cystectomy or novel subtype-directed therapies.

  Study EGAS00001006879

• The Environmental Determinants of Diabetes in the Young Study (TEDDY)

  The Environmental Determinants of Diabetes in the Young (TEDDY) Study investigates genetic and genetic-environmental interactions, including gestational infection or other gestational events, childhood infections and other environmental factors after birth, in relation to the development of pre-diabetic islet autoimmunity and type 1 diabetes (T1D). Beginning in 2002, a consortium of six centers assembled to participate in the development and implementation of studies to identify environmental factors that trigger the development of islet autoimmunity and T1D in genetically susceptible individuals. The TEDDY study screened around 400,000 newborns and recruited 7,749 neonates from the general population with a pre-determined T1D risk of 3% and 919 neonates with first degree relatives who have T1D and who have a pre-determined T1D risk of 10%. Thus, TEDDY proposes to follow over 8,000 participants across six clinical centers worldwide (Finland, Germany, Sweden and three in the United States) until the age of 15. Participants are followed every three months for islet autoantibody measurements with blood sampling until four years of age and then at least every six months until the age of 15. After the age of four, autoantibody positive subjects continue to be followed at 3 month intervals and autoantibody negative subjects are followed at six month intervals. In addition to the analysis of autoantibodies, additional data and sample collection is performed at each visit. The parents collect monthly stool samples in early childhood. The parents also fill out questionnaires at regular intervals in connection with study visits and record information about diet and health status in the child's TEDDY Book between visits. Continued long-term follow-up of the currently active TEDDY participants will provide important scientific information on early childhood diet, reported and measured infections, vaccinations, and psychosocial stressors that may contribute to the development of type 1 diabetes and islet autoimmunity. DNA extracted from the 9-month TEDDY blood sample was used for SNP genotyping. Samples were available for 7,082 participants. SNPs were genotyped by the Center for Public Health Genomics at the University of Virginia, using the Illumina ImmunoChip SNP microarray of around 196,000 SNPs selected from 186 regions associated with 12 autoimmune diseases (including T1D) (Hadley et al., 2015). "Data quality control (QC) steps included eliminating subjects with a low call rate (> 5% SNPs missing) and discrepancies between reported gender and prior genotyping at the HLA laboratory. Secondly, SNPs were removed from analysis due to low call rate, Hardy-Weinberg equilibrium P value < 10-6, except for chromosome 6 due to HLA eligibility requirements)" (Törn et al., 2015). QC resulted in a total of 7,023 subjects with data on 176,586 SNPs. Additional information on the TEDDY study are available in the following articles: The Environmental Determinants of Diabetes in the Young (TEDDY) Study. TEDDY Study Group. Annals of the New York Academy of Science, 2008 and TEDDY - The Environmental Determinants of Diabetes in the Young - An Observational Clinical Trial. Annals of the New York Academy of Science, 2006 Details of the TEDDY protocol can be found in The Environmental Determinants of Diabetes in the Young (TEDDY): Genetic Criteria and International Diabetes Risk Screening of 421,000 infants. Pediatric Diabetes, 2011

  Study phs001037

• Copy number profiling of circulating cell-free DNA from high grade serous ovarian cancer patients

  Study EGAS00001004670

• PCR-free HiSeqX whole genome sequence data on 120 samples with triplet repeat expansions (premutation and full expansions)

  Whole genome sequence (WGS) data was generated on 120 Coriell samples with the following validated repeat expansions: Fragile X Syndrome, Huntington disease, Friedreich’s ataxia, Amyotrophic Lateral Sclerosis, Myotonic Dystrophy, Spinocerebellar Ataxia 1/3 and Dentatorubral-Pallidoluysian Atrophy. These samples were sequenced using 2x150bp reads on an Illumina HiSeqX sequencer and the repeat expansions were called using ExpansionHunter to demonstrate the ability to call large repeats from high throughput, PCR-free WGS data.

  Study EGAS00001002462

• PyEGA3 download client

  PyEGA3 Checks prior to download - Is the dataset available for download? Most datasets are available using the PyEGA3 Download client, except for specific legacy datasets. For these ones, refer to Live Outbox distribution, an alternative way to download these datasets.If the dataset you've been granted access to begins with the ID EGAD5XXXXXXX, please refer to the Live Outbox distribution. If the dataset you have been granted access to contains encrypted data (filename ending in .gpg), contact EGA Helpdesk for detailed information on how to download these files.General Information The PyEGA3 download client is available at its GitHub repository. In its README you will find a step by step guide on how to use it to download files you have been granted access to. PyEGA3 implements the GA4GH-compliant HTSGET protocol supporting requests over genomic ranges. This enables the download of specific regions of interest rather than the entire file. HTSGET is not possible for all the files held by EGA: if the dataset does not contain index files (e.g. filename ending in *.crai), then genomic range requests cannot be performed. The maximum number of connections allowed is 30. If more than 30 connections are used, the download client will encounter 500 errors. The recommended number of connections for maximum output is one. Check out our video tutorial! Frequently Asked Questions General questions How do I download the datasets to which I have been granted access? After setting up your EGA download account, you can proceed to download using the EGA download client – PyEGA3. The pyEGA3 download client is a python-based tool for viewing and downloading files from authorised EGA datasets. This download client is continuously being developed for more user-friendly download experiences. Can I download the dataset’s metadata via the download client? No, the download client cannot be used to download metadata. Registered EGA users can download metadata of an authorised dataset by logging into the EGA webpage and navigating to the dataset of choice. Approximately two thirds down the page you will find the option to download the metadata as a zip file. How do I download large datasets as quickly as possible? The main EGA download client is pyEGA3 download client, a python-based tool for viewing and downloading files from authorised EGA datasets.We could exceptionally consider the option of an Aspera download for users experiencing very slow download rates or facing particular issues.Contact the EGA Helpdesk for further information. Pre-requirement and Installation What are the major requirements for the PyEGA3 download client installation and usage? The PyEGA3 client is compatible with any OS with Python 3.6+ installed. The client requires a connection to the internet, sufficient space on the destination drive, and the EGA download account credentials. Where can I find the PyEGA3 download client installation and download instructions? We strongly recommend checking our video tutorial demonstrating the usage of PyEGA3 from installation to file download. More detailed information is available at PyEGA3 GitHub. What ports are required for the PyEGA3 download client to function? PyEGA3 makes HTTPS calls to the EGA Data API (https://ega.ebi.ac.uk:8443). This port 8443 must be reachable from the location where PyEGA3 is executed to avoid timeouts. PyEGA3 download client How to update the PyEGA3 download client to be on the latest version? Updating the client to the latest version can be achieved by running the following command: pip3 install pyega3 --upgrade I do not have an active EGA account. Can I test the download with the PyEGA3 download client? An EGA download test account (ega-test-data@ebi.ac.uk) has been created for troubleshooting and training purposes. The test account does not require an EGA username and password because it contains publicly accessible files from the 1000 Genomes Project. More information about the use of this account and log in details are available at pyEGA3. I lost my connection while the download was in progress. Does this mean that I have to download the file again from the start? The PyEGA3 download client supports automatic resumption of downloads. To enable quicker download speeds, the API breaks files into up to four segments and downloads them in parallel. With the resume feature, downloads will automatically resume if you encounter any errors or if the connection is interrupted. How can I improve the overall download speed of the PyEGA3 download client? Download speeds can be optimised using the --connections parameter which will parallelise download at the file level. If the --connections parameter is provided, all files >100Mb will be downloaded using the specified number of parallel connections. It is important to note that files are still downloaded sequentially, so using multiple connections does not mean downloading multiple files in parallel. The maximum number of connections allowed is 30. If more than 30 connections are used, the download client will encounter 500 errors. The recommended number of connections for maximum output is one. Why is my file taking a long time to be saved? Please note that when a file is being saved, it goes through two processes. First, the downloaded file "chunks" are pieced back together to reconstruct the original file. Secondly, PyEGA3 calculates the checksum of the file to confirm that the file was downloaded successfully. Larger files will take more time to reconstruct and validate the checksum. Why is the HTSGET protocol not working with my dataset of interest? PyEGA3 implements the GA4GH-compliant htsget protocol for supporting requests over genomic ranges. This exciting new feature means that for data files with accompanying index files (e.g. .crai for CRAM files) users can download specific regions of interest rather than the entire file, saving both time and storage space. Please note that in order for the genomic range requests to work for a BAM, CRAM or VCF file there must be an associated BAI, CRAI or TBI file, respectively. If the dataset does not contain these index files then genomic range requests cannot be performed. After download Do I need to decrypt data files downloaded through the pyEGA3 download client? Files are transferred over secure HTTPS connections and received unencrypted, thus there is no need for decryption after data download. What is the purpose of an MD5 file? After the download completes, file integrity is verified using checksums. The PyEGA3 download client automatically verifies each file’s unencrypted md5 after download to ensure that the file was downloaded correctly from the EGA. Errors Why do I get a “400 Client Error” while trying to access the download client? Ensure that your credentials are formatted correctly. Please contact the EGA Helpdesk if you are unsure about your account’s username (i.e. your email address). Why do I get a “500 Server Error”? It is important to note that files are still downloaded sequentially, so using multiple connections does not mean downloading multiple files in parallel. The maximum number of connections allowed is 30. If more than 30 connections are used, the download client will encounter 500 errors. The recommended number of connections for maximum output is one. Otherwise, 500 server errors are internal server errors from EGA’s end. Retry after some time and, if the 500 error persists: check our homepage or Twitter for any outage information or report it to EGA Helpdesk. Why do I get a “slice error”? This type of error occurs when one slice download was prematurely interrupted. Please re-start the same download. The download client will pick up any partial download and download any missing slices. Why do I get the error “Dataset' EGADXXXXXXXXXXX' is not in the list of your authorised datasets”? Please note that the data access was given to the email (username) provided to the Data Access Committee (DAC) in your official request. Therefore, you shall check that the account that you are using is the same one that you sent to the DAC. Why do I get “ERROR:root:Failed to obtain IP address”? This might mean that the connection ports are blocked. Check that the port 8443 is reachable.In case the port is reachable and the error persists, please try to modify the file pyega3.py on line 44 in the python module installation: Replace endpoint = 'https://ipinfo.io/json' with endpoint = 'https://api.myip.com' Why do I get the error “Invalid username, password or secret key - please check and retry”? Make sure that you are using the correct credentials (username and password) and there is no typo. Contact EGA Helpdesk if the problem persists.

  Documentation access/download/files/pyega3

• Low-coverage whole genome methylation sequencing of cell-free DNA from healthy volunteers and allograft transplant recipients

  Low-coverage whole genome methylation sequencing of cell-free DNA (cfDNA) from healthy volunteers (n=2) and allograft transplant recipients (n=11). The cfDNA was extracted from urine and plasma and sequenced using both a single- and double-strand library preparation method (n=15 and n=18).

  Dataset EGAD00001010937

• MAESTRO-Pool Enables Highly Parallel and Specific Mutation-Enrichment Sequencing for Minimal Residual Disease Detection in Cohort Studies

  MAESTRO-Pool builds upon the technology MAESTRO (Minor Allele Enriched Sequencing Through Recognition Oligonucleotides) by pooling tumor-specific MAESTRO probes from multiple patients and applying these to all samples from all patients. In this study, MAESTRO-Pool was applied to a cohort of 9 melanoma patients where 98 plasma samples were screened for 22,333 mutations. Additionally, a new dynamic minimal residual disease (MRD) caller was used to estimate the likelihood of MRD detection based on the number mutations and cell-free DNA molecules interrogated which allowed each bespoke MRD test to be properly calibrated against false detection. These developments led to sensitive detection in patient-matched samples down to 0.78 parts per million (ppm) while limiting false detection in negative controls to 1/784 (tumor fraction=2.7 ppm). MAESTRO-Pool and the dynamic MRD caller enable a unique blend of sensitivity, specificity, and efficiency, which will improve the ability to detect MRD.The data contained in this repository consists of:Tumor and normal whole genome sequencing data used to call patient-specific tumor mutations and design the MRD Tracker and MAESTRO-Pool fingerprintsMAESTRO-Pool data (enriched duplex sequencing via hybrid capture) of tumor gDNA, normal gDNA and cfDNA MRD Tracker data (duplex sequencing via hybrid capture) of tumor gDNA, normal gDNA and cfDNA

  Study phs003447

• The cell free DNA methylome of primary and metastatic prostate tumors

  Study EGAS00001005522