1277 results for "get free coins fc 26 Visit Buyfc26coins.com Bardzo pod wrażeniem jakości usług..VZcl"

in 13.22 milliseconds.

• Reliable detection of somatic mutations in solid tissues by laser-capture microdissection and low-input DNA sequencing

  Somatic mutations accumulate in healthy tissues as we age, giving rise to cancer and potentially contributing to ageing. To study somatic mutations in non-neoplastic tissues, we developed a series of protocols to sequence the genomes of small populations of cells isolated from histological sections. Here, we describe a complete workflow that combines laser-capture microdissection (LCM) with low-input genome sequencing, whilst circumventing the use of whole-genome amplification (WGA). The protocol is subdivided broadly into 4 steps: tissue processing, LCM, low-input library generation and mutation calling and filtering. The tissue processing and LCM steps are provided as general guidelines which may require tailoring based on the specific requirements of the study at hand. Our protocol for low-input library generation utilises enzymatic rather than acoustic fragmentation to generate WGA-free whole-genome libraries. Finally, the mutation calling and filtering strategy has been adapted from previously published protocols to account for artefacts introduced via library creation. To date, we have used this workflow to perform targeted and whole-genome sequencing of small populations of cells (typically 100-1,000 cells) in thousands of microbiopsies from a wide range of human tissues. The low-input DNA protocol is designed to be compatible with liquid handling platforms and make use of equipment and expertise standard to any core sequencing facility. However, obtaining low-input DNA material via LCM requires specialized equipment and expertise. The entire protocol from tissue reception through whole-genome library generation can be accomplished in as little as a week, though 2-3 weeks would be a more typical turnaround time.

  Dataset EGAD00001006088

• GDAP - Genome Diversity in Africa Project (2021-02-12)

  The Genomic Diversity in Africa Project (GDAP) started with the plan to develop a genomic resource from African populations, characterise genomic diversity and population history, and facilitate clinical studies in Africa. Currently, 25 individuals from 24 ethnolinguistic groups have been whole-genome sequenced at high depth totalling 585 individuals. An additional 41 individuals have been sequenced with 10X Genomics libraries. At this stage, the initial curation of this dataset has been finished and we are performing the analysis in coordination with our collaborators. The current state of the GDAP represents a very diverse panel of African populations that maximizes geographical and ethnic variation and represents a great starting point to achieve the aforementioned goals. However, southern sub-Saharan countries, Bantu speakers and hunter gatherer groups are currently underrepresented, despite being crucial to understand the evolutionary history of the continent. After extensive effort to collate studies documentation, we finally have the opportunity to sequence 600 new individuals from these groups, including countries as Gabon, Rwanda and Zambia, and address these deficiencies. We aim to proceed with the same strategy: to sequence at high depth 25 individuals with standard PCR free libraries, with 2 additional individuals with 10X Genomics Chromium libraries per ethnolinguistic group. The former allows a good representation of variants down to low frequency in any given population, and the latter allows accurate phasing and the analysis of structural variation. By including these new populations, we want to investigate three crucial questions in African history in addition to the initial objectives: the Bantu expansion, the evolutionary history of hunter gatherers and the transatlantic slave trade. Additionally, the expanded dataset will help us better discover the genetic variation present in Africa and characterize the African pangenome. This data is part of a pre-publication release. For information on the proper use of pre-publication data shared by the Wellcome Trust Sanger Institute (including details of any publication moratoria), please see http://www.sanger.ac.uk/datasharing/ . This dataset contains all the data available for this study on 2021-02-12.

  Dataset EGAD00001006965

• Development and Use of Network Infrastructure for High-Throughput GWA Studies

  The "Development and Use of Network Infrastructure for High-Throughput GWA Studies" project is collaboration between Group Health Cooperative (GH), the University of Washington (UW), and the Fred Hutchinson Cancer Research Center (FHCRC). It is one of 5 sites participating in The Electronic Medical Records and Genomics (eMERGE) Network funded by the National Human Genome Research Institute (NHGRI) with additional funding from the National Institute of General Medical Sciences (NIGMS). The overall eMERGE project is designed to assess whether linking biorepositories of patients in healthcare delivery systems with electronic medical records (EMRs) is an efficient strategy for high-throughput genome wide association (GWA) studies and whether information can be pooled across sites. The primary phenotype in the Group Health/UW Aging and Dementia eMERGE study project is dementia. Phenotyped participants originated from four population-based sources. Seattle-area members of GH (a large integrated health care system in Washington State) consented and enrolled in 1) the University of Washington Alzheimer's Disease Patient Registry (ADPR) and 2) the Adult Changes in Thought (ACT) study, 3) Marshfield Clinic Personalized Medicine Research Project (PMRP), a population-based DNA, plasma and serum biobank of 20,000 adults, 4) Vanderbilt's BioVU, a de-identified DNA biobank. The ADPR (PI: Eric B. Larson; NIH/NIA U01 AG 006781) is a population-based registry of incident dementia cases designed to identify all new dementia cases within GH from 1987 to 1996. Potential dementia cases were identified through referrals from primary care physicians, mental health services, and neurologists, as well as review of CT scans, neurology, emergency room, geriatrician, and mental health clinic logs, and hospital discharge diagnoses. Medical history, physical, laboratory testing, and neuropsychological testing were performed on all consenting potential cases. These data were reviewed by a consensus conference including a neuropsychologist, study physicians, and an epidemiologist. After discussion of the case, dementia status is assigned using DSM-III-R criteria. Alzheimer's disease status was assigned using the National Institute of Neurological and Communicative Disorders and Stroke-Alzheimer's Disease and Related Disorders Association (NINCDS-ADRDA) criteria. The study base of the ADPR population was stable with an attrition rate of less than 1%/year. The ACT study (PI: Eric B. Larson; NIH/NIA U01 AG 006781) is an ongoing community-based cohort study designed to determine the incidence of Alzheimer's Disease (AD), other types of dementia, and cognitive impairment and to determine risk factors for these conditions. The original cohort of 2,581 was enrolled in 1994-1996. An expansion cohort of 811 was enrolled in 2000-2002. Continuous enrollment to keep 2,000 persons enrolled and at-risk for dementia outcomes was begun in 2005. To date the study has accrued more than 4,000 participants. Dementia-free participants are enrolled in this cohort and evaluated every two years by study personnel with many evaluations including an assessment of cognitive functioning using the Cognitive Abilities Screening Instrument (CASI), which is an extended version of the Mini-Mental State Examination that has been widely used in epidemiological studies of the elderly. Persons with CASI scores lower than 86 or in whom interviewers suspect unusual cognitive decline are followed up with dementia diagnostic evaluations which include physical and neurological examinations and neuropsychological tests. Medical records are reviewed, and laboratory tests and neuroimaging are obtained if not available. The dementia diagnoses and dementia subtypes are determined during a consensus conference attended by the examining clinicians and other study physicians, a neuropsychologist, and research nurse. After discussion of the case, dementia status is assigned using DSM-IV criteria. Alzheimer's disease status was assigned using NINCDS-ADRDA criteria. Individuals diagnosed with dementia are seen again one year following diagnosis using the same procedures. Individuals not diagnosed with dementia are returned to the pool of at-risk individuals and are seen at their next routinely scheduled biennial visit. The ACT sub-sample is stable; for the original cohort, median enrollment in GH was 19 years prior to joining the ACT study, and 85% of the cohort has ≥ 10 years of GH enrollment. DNA for the ADPR participants were obtained through a companion study, Genetic Differences in Cases and Controls (PI: Walter Kukull; NIH/NIA R01 AG007584). DNA obtained through both studies were extracted from blood using Gentra Systems Puregene methods. DNA concentration is determined by UV optical density. All samples are checked for quality by OD 260/280 ratio. For long-term storage, samples are aliquoted and stored at -70°C. The Marshfield study, Personalized Medicine Research Project (PMRP), a population-based DNA, plasma and serum biobank of 20,000 adults. PMRP was started in 2002 as a 3 Phase project. Completed in April 2004, the objectives of Phase I were to build and develop a large population-based biobank with DNA, plasma and serum samples to facilitate genomics research. Phase 1 was also to educate, inform and consult with the Marshfield Epidemiologic Study Area population and communities concerning potential studies, create the DNA foundation of the personalized medicine database and build the bioinformatics tools to store securely and analyze genotypic and phenotypic data. Phase I tasks included operation of the ethics and security advisory board, scientific advisory board and community advisory group. More than 18,000 residents aged 18 and above from 19 different zip codes surrounding Marshfield, WI were invited to participate in Phase I. After providing written informed consent, participants completed brief questionnaires that included questions about demographics, some environmental exposures, family history of disease, and adverse drug reactions, as well as family members living in the area. Participants provided 50ml of blood from which DNA was extracted and plasma and serum samples were stored. The informed consent process allowed access to electronic medical records and included language about non-disclosure of personal research results. A tick-off box was included so that participants could either allow or decline subsequent recontact for future research studied. The objectives of Phase II are to create the phenotypic database, establish the scientific and administrative infrastructure to support genetic mapping of the DNA and the initial discovery projects and genotype a sufficient portion of the genetic material to support these discovery projects. The objectives of Phase III are to expand the discovery projects, complete the genotyping of the genetic database and expand physician/health care provider education and community consultation. The Vanderbilt BioVU model uses discarded blood leftover from clinical care and de-identified clinical information, both of which are tracked with a Research Unique Identifier that is permanently disconnected from the medical record number used to generate it. The Vanderbilt IRB determined that the project does not qualify as "human subject" research under §46.102(f)(1)(2). The program has been reviewed by OHRP twice (the latest immediately prior to launch), and the determination of the Vanderbilt IRB that the project is consistent with the 8/10/2004 guidance has been validated. The model includes a simple opt out mechanism developed for patients who do not wish to have their samples included. Planning (including community involvement, ethics and IRB discussions, focus groups, development of operating procedures and pilot studies to assess them) began in May 2004, and the resource commenced sample collection in February 2007 and as of May 2009 contains approximately 56,000 samples. The current resource will be available to all Vanderbilt investigators who sign a Data Use Agreement. The resource represents Vanderbilt's broad patient population and thus provides a potential resource for research in a range of common and rare diseases as well as drug response or medication safety. BioVU patient protection model: There has been extensive involvement by the ethics community and the IRB to put in place procedures to provide privacy protection. The overall protection plan is multifaceted and includes a combination of technology and policy: (1) creation of the SD described above; (2) return of only the specific clinical data items requested by investigators (rather than the complete de-identified chart); (3) submission of any specific proposed project to the IRB and to a separate protocol review committee, both of which must approve; (4) implementing a Data Use Agreement that permits only approved queries and data analyses, specifically prohibits attempts at re-identification (at the risk of institutional sanctions), and mandates redeposit of all genetic information generated in a research study back into a genomic database; and (5) tracking and auditing all use.

  Study phs000234

• Submission FAQ

  Submission FAQ Before Submission Is the EGA the right archive for my data? The most suitable archive for your data is dependent on the type of data you are wishing to submit and whether the data require public or controlled access. Public access is defined as complete and open access to all submitted data. On the contrary, controlled access, exerted by the EGA, requires formal applications to be made to access the submitted data files and metadata. EGA only accepts human-derived data subject to controlled access. If your submission contains other types of data, please choose the appropriate repository for it (see image below): ENA, EVA, ArrayExpress, BioSD and GWAS catalog.  Should your submission be subjected to controlled access? Data access conditions are normally defined in the original informed consent agreements signed by the participants involved in your study. All data submitted to the EGA is subject to controlled access. These consents prevent the derived data files, potentially identifiable, from being dispersed by open and public access. Controlled access data often refers to human data derived from medical research and consortium projects. If in doubt, consult the informed consent agreements that apply to your study The EGA enables you to hold a submission before publication. What data types can be submitted to the EGA? Data types accepted by the EGA can be split into three categories: Sequences: both in generic and platform-specific formats. Array-based: from raw signal files to processed matrices. Phenotypes: all possible phenotype formats are accepted. All manufacturer-specific raw data formats derived from major next generation sequencing platforms are accepted. Also generic sequence formats: flat reads in a FASTQ file, aligned sequences (BAM or CRAM files) as well as sequence variation files in VCF format. All array-based technologies are accepted, including raw data, intensity and analysis files, without any restriction on data formats accepted. We also accept and distribute phenotype data (associated to the samples) in almost any format: from an image to a README file. How long does a submission take? Submissions to EGA come in a variety of formats and sizes, thus it is difficult for us to exactly predict how long a submission will take. We, therefore, advise all of our submitters to allow as much time as possible to make a submission. Based on previous records, we anticipate that the submission process may take at least one month. The submitter’s familiarity with the procedures, possible technical issues that may arise during submission and the amount of data that is being submitted are the main factors that will affect the length of the submission process. However, each step of a regular submission should be considered when estimating the time it would take: Encryption of the files Upload of the files Metadata submission Archival of the files Release of the study and datasets to EGA webpage For example, the upload of the files depends on the submission size, while metadata submission mainly relies on each submitter’s expertise. Further, some steps (e.g. answering to inquiries) depend on the EGA Helpdesk team, which may take some days to be processed during busy times Is data deposited in the EGA secure? The EGA set-up consists of a secure computing facility for data processing, a shared EBI set-up for data submissions and distribution of data via data requests made through the EGA website. Data is also copied in the Barcelona Supercomputing Center (BSC) infrastructure, where all stored and distributed data is encrypted Data is encrypted along the submission process and stored securely, granting its access to authorised users exclusively. During the download process, through our Python Client or Aspera, all requested data is downloaded over secure https connections. All data at the EGA is encrypted, and only accessible (for log-in and download) through secure protocols. For further information please, visit our security overview. What documentation do I need to provide? All submissions require policy’s documentation: 'Data Access Agreement (DAA)', 'Data Processing Agreement (DPA)' and 'Authorized Submitters Formulary'. The data processors (EGA) and the data owners will also sign the DPA. Will all metadata be public? Among the submitted metadata we need to make the distinction between identifiable and unidentifiable metadata: (1) the former may allow the identification of the human the sample derived from (e.g. detailed geographical providence, personal name, family ancestry…); (2) while the latter can be used to interpret the data without compromising the anonymity of the patients. The majority of the metadata submitted to the EGA corresponds to the unidentifiable category (e.g. sequencer's model). This type of metadata is publicly available on the EGA website and other EBI resources/partners’ websites. On the other hand, some parts samples’ metadata are subject to being identifiable, and thus only accessible by authorized data requesters, with the exception of: 5 submitter-defined attributes of the sample: alias, title, subject_id, gender and phenotype. It is the submitter’s responsibility not to submit sensitive metadata in these public fields. 3 anonymised fields that pinpoint the sample record in archivals: sample’s EGA stable ID (EGAN…), BioSample ID (SAMEA…) and submitter’s center name. During Submission Are there any sample specific requirements for EGA? All samples submitted to the EGA must include the attributes of biological sex, subject ID (anonymised individual identifier) and phenotype information. These are critical for data findability and its analysis, and we highly recommend using controlled ontology terms where applicable. For example: defining tumour and non-tumour samples and/or defining disease state. The EGA recommends using the Experimental Factor Ontology Database to find ontologized terms that describe your sample phenotypes. How do I get an accession number to use in my publication? You will receive your study accession number (EGAS…) upon complete your submission, either: Programmatically. As soon as the metadata is submitted and validated your study will be assigned an accession number that will be given in the submission’s response. Manually registering your study and relevant metadata using the online metadata submission tool: the EGA submitter Portal. How are files uploaded to the EGA? Data files are uploaded into private submission drop boxes (i.e. environments to which you are granted access and where you can transfer your files) using INBOX or FTP. These spaces are provided as part of the submission procedure. Before uploading any file, you must encrypt your files, . Only encrypted files shall be uploaded to the drop boxes. Why does data need to to encrypted for my submitted files? It is one of the security steps the EGA has implemented. In case of a security breach, people without the proper encryption key will not be able to read or use the information that could have been leaked. This measure is essential when working with sensitive data, such as controlled access human data. All submitters must use crypt4gh to create EGA compliant files prior to uploading them. This encryption is GPG-based, using EGA’s public key. Why are my files not available if I see them in the INBOX? There exists a time window between the data upload and the availability of such files via the Submitter Portal. For this reason, some metadata (run and analysis objects) cannot be registered until at least 24 hours after the files have been uploaded to your box. Why are MD5 sum values generated for my submitted files? We require pre- and post- encryption MD5 (message-digest) checksum values to be provided for all submitted files. These 128-bit values are computed using the content of each file, creating unique sequences that allow us to ensure that file integrity has been maintained during the transfer process. In other words, if the MD5 checksums we generate and those you generated match, we infer that the content of the transferred files is correct (i.e. files are not corrupted or truncated). MD5 checksums are computed automatically using the crypt4gh tool provided. Your submission will not be accepted and may be significantly delayed if you do not provide MD5 checksum values for all data files in the required format. How can I check if my files are correctly uploaded to the inbox? It is important to check the status pf your file so you know whether your files are in the inbox, being processed, or if there is any issue with one of them. In order to check this, you should: Look for the file locally. Drag and drop it to the file table. Then bars will appear on the table, which means that we are processing it. Green: The files checksum are correct and your file will move to “ingested files”. No further actions are needed from your end.. Red: The files checksum does not match and your file needs to be re-uploaded. Please re-upload relevant files to your inbox using the same path. How can I add my dataset to the cBioPortal instance? In order to link your data to the cBioPortal, you must register it as a normal dataset in the Submitter Portal. For more information, please refer to the cBioPortal documentation. After Submission How do I use my accession number in my publication? We suggest the use of the below template, using your study accession ID (EGAS…) : Data has been deposited at the European Genome-phenome Archive (EGA), which is hosted by the EBI and the CRG, under accession number EGASXXXXXXXXXXX. Further information about EGA can be found at https://ega-archive.org and "The European Genome-phenome Archive of human data consented for biomedical research" Your study ID will be the one that groups your whole submission, and thus its usage is recommended as such. Nevertheless, all metadata submitted to EGA hold a unique and persistent identifier (starting with EGA…) that can be used to identify specific records. For example, you could reference a specific dataset (EGAD…) or sample (EGAN…) in your publications (see full list of identifiers). How do I make my data searchable? Once you have finalized your submission, you can schedule the data release. Please take into account that the release process needs time for the files to be archived in our system, and for the Helpdesk team to validate your submission. Can I withdraw (meta)data from the EGA? We have methods in place for the secure removal of deposited (meta)data. Contact EGA-helpdesk for further details. EGA complies with FAIRness of (meta)data, and thus, even when the data is removed we keep an entry for their identifiers in our system. In other words, we execute a soft delete on canceled objects (e.g. a study): metadata is still stored in our systems, but it loses all links, cannot be queried and data files cannot be retrieved anymore. The reason behind this behaviour is so that queries using withdrawn data properly respond back (see example of a canceled study). What happens to the data once it has been submitted to the EGA? When the data is submitted, the submitter can choose either keep their data private or schedule the release of their data.

  Documentation submission/metadata/submission/FAQ

• The Finland-United States Investigation of NIDDM Genetics (FUSION) Tissue Biopsy Study

  The Finland-United States Investigation of NIDDM Genetics (FUSION) study is a long-term effort to identify genetic variants that predispose to type 2 diabetes (T2D) or that impact the variability of T2D-related quantitative traits (QTs). Most of the variants associated with T2D and related traits (glucose and insulin, anthropometrics, lipids) through genome-wide association studies (GWAS) occur in non-coding regions, suggesting a strong regulatory component to disease susceptibility. Regulatory element activity is often tissue-specific, which further complicates discovery of the causal/functional variation. Therefore, there is a critical need to identify the appropriate cell type, regulatory elements, target genes, and causal variants(s) in T2D-relevant tissues. We hypothesize that a subset of T2D and related variants alter gene expression regulation in skeletal muscle and adipose tissue - two major insulin target tissues and play key roles in insulin resistance. To that end, our study contains a comprehensive survey of genomics, epigenomics and transcriptomics in skeletal muscle and adipose tissue from individuals with glucose tolerance categories ranging from normal to T2D.For this FUSION Tissue Biopsy Study, we obtained RNA-Seq, microRNA (miRNA)-Seq, and DNA methylation (methyl)-Seq data on biopsy samples from 331 individuals from across the range of glucose tolerance: 124 normal glucose tolerance (NGT), 77 impaired glucose tolerance (IGT), 44 impaired fasting glucose (IFG), and 86 newly-diagnosed T2Ds. Participants completed two study visits, two weeks apart. First visits comprised most of the clinical phenotyping, including four-point OGTT (fasting, and 30, 60, and 120 minute post-load); BMI, WHR; lipids; blood pressure; and many other variables. Participants also completed FUSION health history, medication, and lifestyle questionnaires. On the second visit, we obtained ~250mg vastus lateralis skeletal muscle, ~750mg abdominal subcutaneous adipose, and a ~5x15mm section of abdominal skin. Visits were completed in March 2013. RNA isolation is ongoing in the Collins laboratory at the NIH, RNA and miRNA sequencing at the NIH Intramural Sequencing Center (NISC), and genotyping at the Center for Inherited Disease Research (CIDR). Individual-level data is available here for the 306 individuals who consented to data deposit. To focus on evaluation of gene expression and its regulation in skeletal muscle, we analyzed mRNA extracted from vastus lateralis skeletal muscle obtained from 271 of the 331 individual subjects from Finland, along with genome-wide genotypes. Individual-level data is available here for the 250 subjects who consented to the use of their data.Release phs001048.v2.p1 adds muscle data for an additional 42 subjects and data from adipose tissue for 276 subjects. Total RNA was isolated using Trizol extraction in the Collins laboratory at the NIH. The mRNA was poly-A selected, 24-plex libraries were generated using the Illumina TruSeq directional mRNA-seq library protocol and RNA sequencing was performed on HiSeq2000 sequencers using 101bp paired-end reads at NISC. miRNA libraries were prepared from total RNA from 296 muscle and 270 adipose samples, pooled and sequenced 50bp single-end reads on Illumina HiSeq2500. Data for 272 muscle and 251 adipose samples are available here for individuals with consent for data deposit. DNA was extracted from blood in the Collins laboratory, and genotyping on the Illumina Omni2.5M array was performed at CIDR. Genotypes were imputed using the HRC 2016 reference panel. In order to assess regions of open chromatin in skeletal muscle, we obtained muscle tissue from a commercial provider to perform ATAC-seq; these samples were sequenced at the University of Michigan DNA Sequencing Core.Release phs001048.v3.p1 adds single-nucleus (sn) RNA-seq and ATAC-seq data in 287 skeletal muscle samples out of the original 331 individuals. Individual-level data is available here for the 265 subjects who consented to the use of their data. The frozen tissue biopsy samples were processed in ten batches, each consisting of 40-41 samples. These batches were organized using a randomized block design to protect against experimental contrasts of interest including cohort, age, sex, BMI among others. Samples in each batch were pulverized, pooled together followed by nuclei isolation. The nuclei were processed on the 10X Genomics Chromium platform separately for snATAC-seq and snRNA-seq (v. 3.1 chemistry for snRNA-seq).Release phs001048.v4.p1 adds additional phenotypes and provides some corrections to several previous phenotypes.

  Study phs001048

• How to upload GPG files

  Uploading files Users that holds an ega-box-XXX account can upload files using either INBOX or FTP. Users who have a Submitter role associated with their email will only be able to upload files using INBOX. Before uploading your files please make sure that any files that will be uploaded to EGA do not use special characters in their naming convention such as # ? ( ) [ ] / \ = + < > : ; " ' , * ^ | &. This can cause issues with the archiving process, leading to problems for end users. The EGA is a shared, public service with limited storage. In order to manage the available resources, we enforce a limit of 10Tb per submission account at any one time. Please do not exceed this limit. INBOX FTP The FTP is only compatible with files encrypted using the EGACryptor tool Before uploading Once your submission files have been prepared using the EGAryptor, the resulting encrypted files and associated md5sum files can be uploaded to your submission account using Aspera or FTP. The EGA is a shared, public service with limited resources. In order to manage the available resources, EGA submission boxes should not exceed 8Tb in size, and cannot exceed 12Tb. If you are approaching this limit please contact contact EGA Helpdesk so that we can advise on how to register the associated metadata and trigger the archiving of files, so that you can continue with your submission. If we note that your submission account increases above 10Tb on a consistent base your password will be changed until metadata is associated. Aspera Download Aspera Using Aspera FTP FTP windows FTP Linux / Unix FTP client (Filezilla) FTP and TLS Troubleshooting Troubleshooting Aspera Download Aspera is a commercial file transfer protocol that may provide faster transfer speeds than ftp especially over longer distances. The Aspera ascp command line client. Please select Aspera Connect. The ascp command line client is distributed as part of the aspera connect highperformance transfer browser plugin and is free to use, without registration. The minimum required version of the IBM Aspera Cli is V4. Further instructions. Using the Aspera ascp command line program The location of the ascp program in the filesystem: Mac: on the desktop go cd /Applications/Aspera\ Connect.app/Contents/Resources/ there you'll see the command line utilities where you're going to use ascp. Windows: the downloaded files are a bit hidden. For instance, in Windows 7 the ascp.exe is located in the users home directory in: AppData\Local\Programs\Aspera\Aspera Connect\bin\ascp.exe Linux: should be in your user's home directory, cd /home/username/.aspera/connect/bin/ there you'll see the command line utilities where you're going to use ascp. Your command should look similar to this: ascp -P33001 -O33001 -QT -l300M -L- /path/file ega-box-N@fasp.ega.ebi.ac.uk:/path If you wish to upload several files without being requested the password, please use the below command : ASPERA_SCP_PASS=ega-box-password ascp -P33001 -O33001 -QT -l300M /path/file ega-box-N@fasp.ega.ebi.ac.uk:/path/ Explanation of parameters l300M option sets the upload speed limit to 30MB/s. You may wish to lower this value to increase the reliability of the transfer. L option is for printing logs out while transferring files to upload can be a file mask (e.g. '/homes/submitter/*.srf) or a list of files. ega-box-N is your submission account login. Add k2 switch for transfer restarts Check the command line transfer usage for more configuration details. Using FTP to upload your prepared files Use your preferred ftp client. For example, lftp is a popular choice for Linux and Mac users. Use binary mode for file transfers. Use ftp.ega.ebi.ac.uk as the target host. Login with your ega-box username and password. Upload files to your private ega-box upload area. Depending on your network setting you might wish to start FTP in passive or active mode. Using default FTP command line client in Windows Start the command line interpreter: press WinR, type cmd, hit enter Enter ftp ftp.ega.ebi.ac.uk Enter your submission username Enter your submission password Type binary to enter binary mode for transfer To see a list of available ftp commands type help. Type ls command to check the content of your submission account. Type prompt to switch off confirmation for each file uploaded. Use mput command to upload files: mput *.bam* Use bye command to exit the ftp client. Use exit command to exit the command line interpreter. Using default FTP command line client in Linux / Unix Open a terminal and type ftp ftp.ega.ebi.ac.uk Enter your submission username Enter your submission password Type binary to enter binary mode for transfer To see a list of available ftp commands type help. Type ls command to check the content of your submission account. Type prompt to switch off confirmation for each file uploaded. Use mput command to upload files: mput *.bam* Use bye command to exit the ftp client. Using FTP client FileZilla We recommend the use of FileZilla, a free FTP client . FileZilla is open source software distributed free of charge under the terms of the GNU General Public License. Use the following connection details (File - Site Manager) and add yoursubmission account username and password: Using FTP client FileZilla Select the files you wish to upload and then select upload: Using FTP client Filezilla Using LFTP with TLS We recommend the following to force the use of a secure connection. lftp > set ftp:ssl-force yes We also recommend setting the following for not encrypting the bulk data itself for performance reasons (theauthentication will still be encrypted): lftp > ftp:ssl-protect-data no In order to verify the certificate,the recommended way would be to use the CA certificates from your machine. To do that use this command in lftp adjusting the path to your ca-certificates location. lftp > ssl:ca-file "/etc/ssl/certs/ca-certificates.crt" If that is not possible or certificates are old and you can't update them, you can download the certificates needed from Quo Vadis Digital Repository The two certificates to download in PEM format are: QuoVadis Root CA2 G3 QuoVadis EV SSL ICA G3 Then you can concatenate them in a file one after the other and save it as lftp-certificates.pem Once this is done you have to point the ssl:ca-file variable to the path lftp > set ssl:ca-file "/path/to/lftp-certificates.pem" Also note that you can save this configuration at ~/.lftp/rc Another option is to download the certificates and add them to the ca-certificates of your machine. For example: In RHEL7 and cenots and others box the process to add the certificates globally is: Download the two certificates (in PEM or DER format, doesn't matter) and save them to "/etc/pki/ca-trust/source/anchors/" Run "update-ca-trust extract" Another less secure option is to turn off certificate verification with the following command: lftp > set ssl:verify-certificate false Troubleshooting If you are having problems with Aspera connection timeouts, it can be down to either one of the following. Transfers cannot start the connection fails instantly. Ensure that TCP traffic on port 33001 is allowed (open) for outbound connections through your computer's firewall and network's firewall. The connection is made, transfers are started, but 0 bytes (0%) are uploaded for each file. Ensure that UDP traffic on port 33001 is allowed (open) for outbound connections through your computer's firewall and network's firewal

  Documentation submission/data/uploading-files/ftp

• Genes and Blood Clotting Study (GABC)

  Objectives: Use genome-wide approaches to identify genetic variants that influence common thrombosis and hemostasis factors, as well as selected common human traits. Design/Methods: The GABC study was a prospective sibling cohort design. Siblings were recruited by targeted email to the undergraduate and graduate student email lists at the University of Michigan. Healthy persons between 14 and 35 years old who had healthy siblings within the same age restriction were able to participate. Study participants agreed to an online informed consent and subsequently completed a 52-question online survey describing their specific bleeding traits as well as many common human traits. Fifty milliliters of blood was collected into a citrate-dextrose solution (ACD) from each participant. An aliquot of whole blood was used for an automated complete blood count analysis and the remainder was processed into platelet poor plasma and buffy coat portions. Plasma and buffy coat aliquots were snap frozen and stored in liquid nitrogen for future studies. 1189 individuals representing 507 sibships were collected between 06/26/2006 and 01/30/2009. Phenotyping Survey Details: To characterize individual bruising and bleeding history, the online survey recorded answers to questions based on a modified von Willebrand Disease (VWD) screening questionnaire. To characterize a collection of participant&#39;s common human traits, the survey recorded answers to questions about height, weight, presence of skin tags, history of acne, eye color, hair color, hair line characteristics, skin sunburn sensitivity, skin tanning ability, natural skin color, freckling, cheek dimpling, earlobe shape, shoe size, foot arch characteristics, hand fifth digit morphology, history of dyslexia, history of migraine headaches, history of seasonal allergies, history of apthous ulcers, tendency to sneeze while walking into a bright sunny place, history of dental caries, need for corrective eye lenses, handedness and like or dislike of strongly flavored foods. Biochemical phenotyping: Assays for plasma Von Willebrand Factor (VWF) antigen were performed using ELISA and "Alphalisa" techniques. Automated complete blood count analysis was performed on a Bayer Advia 120 on all participants (including WBC differential, RBC indices, and platelet count.) For the dbGaP v2 update, new biochemical phenotypes have been submitted and include von Willebrand Factor, von Willebrand Factor propeptide, plasminogen, gamma prime fibrinogen, ADAMTS 13, antithrombin III, protein C, and protein S. All new phenotypes were obtained using "Alphalisa" techniques. Genotyping Details: SNP genotyping was performed using genomic DNA extracted from peripheral blood at the Broad Institute, (MIT/Harvard). Genotyping was performed on the Illumina Omni-1 quad chip at the Broad Institute. For the dbGaP v2 update, genotyping data from the Illumina Human Exome was deposited. This study is part of the Gene Environment Association Studies initiative (GENEVA, http://www.genevastudy.org) funded by the trans-NIH Genes, Environment, and Health Initiative (GEI). The overarching goal is to identify novel genetic factors that contribute to blood clotting through large-scale genome-wide association studies of siblings. Genotyping was performed at the Broad Institute of MIT and Harvard, a GENEVA genotyping center. Data cleaning and harmonization was performed by the primary investigators at the University of Michigan, Ann Arbor, and at the GEI-funded GENEVA Coordinating Center at the University of Washington. This study serves as a resource for investigators who are interested in the genetic determinants of specific plasma proteins in a healthy population. The sibling cohort design allows for linkage analysis in addition to association studies. Analysis of thrombosis and hemostasis related traits should help elucidate specific biochemical and genetic networks that maintain hemostasis. We hope to identify specific genetic determinants of VWF levels in order to better understand the factors that influence the development of VWD.

  Study phs000304

• Submitter Portal API

  Submitter Portal API The metadata submission process can be difficult and time-consuming. For this reason, the EGA has developed the Submitter Portal, a tool that was created to offer a simplified and user-friendly method of registering metadata. Our portal provides features that are intended to make the input of metadata easier, ensuring that your data is registered correctly and effectively. Our page is divided into logical sections and includes a helpful video instruction to further assist you as you complete the submission process. With the Submitter Portal, you can rest assured that the submission of your data is in good hands. For those that want a more flexible and automated approach, we also provide a programmatic approach using the Submitter Portal AP in addition to the user interface of the Submitter Portal. With the help of our API, you can quickly include the submission of metadata into your own workflow for a more effective and individualised experience. Previous steps Create your EGA account To submit data you first need to create your EGA user. Then, once your account has been verified, you will have to request a submitter role and sign the EGA Data Processing Agreement (DPA). When the DPA is signed, you must send it to EGA Helpdesk for further validation. Please, note that if you already have an EGA account, or you have an ega-box (submission account), you can skip this step.  Upload your files Please note that all your files must be encrypted using the Crypt4GH tool before upload them.As soon as you are assigned with a submitter role, you will be able to connect to the EGA inbox and upload your files. Understand the EGA metadata schema It's crucial to comprehend the EGA metadata schema, a set of rules that specify how data is organised, described, and shared inside the EGA, in order to get the most out of this resource. Learn all about EGA metadata schema! Register your DAC and policy There are two objects in the EGA metadata schema that are registered in a separate portal. All DACs and policy objects are registered using the DAC Portal, a tool developed by EGA to help data controllers manage their data stored at the EGA. You can find the relevant information in the DAC Portal Guide. Programmatic submission All the calls to the API need to be Authenticated. We use the OpenID Connect protocol. API Usage Flow: Click here to check the API usage flow schema Obtain Access and Refresh Token: The first step to using the API is to obtain an access and refresh token. These tokens are required for authentication and authorisation of API requests. To obtain these tokens, you need to log in using your EGA credentials. Example: curl "https://idp.ega-archive.org/realms/EGA/protocol/openid-connect/token" \ -d "grant_type=password" \ -d "client_id=sp-api" \ -d "username=your-username" \ --data-urlencode "password=your-password" Use Access Token in API Calls: Once you have obtained the access token, you must use it in all the calls to the API. The access token is valid for a limited time period. When it expires, you will need to use the refresh token to obtain a new access token. Create Submission Object: After authentication, you can start creating a submission object. This object will be used to store all the metadata objects and files related to the submission. Example: curl "https://submission.ega-archive.org/api/submissions" \ -H "Authorization: Bearer your-access-token" \ -H "Content-Type: application/json" \ -d "{ \"title\":\"My submission title\", \"description\":\"My submission description\" }" Create EGA Metadata Objects: Within the submission object, you can create other metadata objects required for the submission. These objects may include information about the submitter, study, sample, experiment, and run. Example of study creation: curl "https://submission.ega-archive.org/api/submissions/{submisison-id}/studies" \ -H "Authorization: Bearer your-access-token" \ -H "Content-Type: application/json" \ -d "{ \"title\":\"My study title\", \"description\":\"My study description\", \"study_type\":\"Metagenomics\" }" If you would like to reuse already registered objects in new submissions, bear in mind that they must have an accession which you must use to reference them. You cannot reuse objects that have not been finalised and accepted yet.For example, when creating a new run which is reusing a previously submitted experiment, instead of using experiment_provisional_id, you must use experiment_accession_id. Enums There are some fields that only accept specific values, i.e. study_type. The API provides several enumerations to list these values. You can list all the enumerations, or a specific one, for example, study_types. Obtain IDs of files You can list the files available in your inbox and filter by a prefix by adding the prefix param, i.e. &prefix=/my_folder/abc Example: curl "https://submission.ega-archive.org/api/files?status=inbox&prefix=/my_folder/abc" \ -H "Authorization: Bearer your-access-token" \ -H "Content-Type: application/json" To improve performance and manageability, we have limited the number of files that the Submitter Portal API can return in a response. If a given call exceeds this limit, user will be asked to narrow down the search by using the query parameters already available in this endpoint. Finalise Submission: Once all the metadata objects are created and linked to the submission, you can finalise the submission. Finalising the submission sends it to the Helpdesk team for review. Please, note that all files linked to the submission must be ingested, and all objects created in a submission must be linked before you can finalise the submission. API Reference: For a full API reference, please check our specification documentation.

  Documentation submission/metadata/submission/sequencing-phenotype/submitter-portal-api

• Starr County Health Studies' Genetics of Diabetes Study

  An initial observation in the 1970s that Starr County, Texas, had the highest diabetes-specific mortality of any of the 254 Texas counties led to the establishment of a field office in Rio Grande City, Texas (the county seat of Starr County) and the initiation of a series of studies to understand the epidemiology and genetics of type 2 diabetes, its complications and related conditions in this predominantly (97%) Mexican American population. The field office opened in February 1981 and has operated continuously since then. During this time, three systematic surveys of the population have been conducted as well as family and longitudinal studies. Culturally sensitive diabetes education programs have been developed and implemented and also a weight loss intervention. In total, more than 23,000 Mexican American individuals have been examined with more than 200,000 aliquots of biological specimens stored. Collectively, these studies are known as the Starr County Health Studies. The present Genetics of Diabetes Study has the goal of identifying loci/alleles that underlie susceptibility to type 2 diabetes in this high risk population using genome wide markers and association testing. The study makes use of two primary resources that have been developed in order to identify 1,000 type 2 diabetes cases and 1,000 disease free controls. In the first instance we have identified a subset of unrelated cases from the total cases that we have identified. Where multiply affected sibships were available, the youngest onset case with detailed phenotyping (including assessment of diabetic retinopathy) was selected. Controls came from a recent survey to establish a representative sample of the Starr County population. Blocks were randomly selected, households on selected blocks enumerated and one individual randomly selected from each household for a detailed examination. The examination included an oral glucose tolerance test. Those included as controls are those with no prior diagnosis of diabetes and a negative oral glucose tolerance test. This collection of cases and controls provides the opportunity to identify susceptibility loci for type 2 diabetes and its complications, specifically diabetic retinopathy and albuminuria. The data set also allows the examination of impaired fasting glucose and impaired glucose tolerance. The samples are split between those born in the United States and those born in Mexico and this gives a natural contrast for examining genotype and environmental interactions. It is anticipated that the understanding that will come will lead to strategies for delaying and preventing the onset of diabetes and its complications.

  Study phs000143

• Diet, Genetic Factors, and the Gut Microbiome in Crohn's Disease

  We investigate the hypothesis that consistent changes in the human gut microbiome are associated with Crohn&#39;s disease, a form of inflammatory bowel disease, and that altered microbiota contributes to pathogenesis. Analysis of this problem is greatly complicated by the fact that multiple factors influence the composition of the gut microbiota, including diet, host genotype, and disease state. For example, data from us and others document a drastic impact of diet on the composition of the gut microbiome. No amount of sequencing will yield a useful picture of the role of the microbiota in disease if samples are confounded with uncontrolled variables. We aim to characterize the composition of the gut microbiome while controlling for diet, host genotype, and disease state. Diet is controlled by analyzing children treated for Crohn&#39;s disease by placing them on a standardized elemental diet, and by testing effects of different diets on the gut microbiome composition in adult volunteers. Genotype is analyzed by large scale SNP genotyping, which is already underway and separately funded--team member Hakon Hakonarson is currently genotyping 50 children a week at ~half a million loci each and investigating connections with inflammatory bowel disease. Clinical status is ascertained in the very large IBD practice in the UPenn/CHOP hospital system. Effects of diet, host genotype, and disease state on the gut microbiome are summarized in a multivariate model, allowing connections between microbiome and disease to be assessed free of confounding factors. This project is divided into four sub-studies. In the Fecal Storage Methods (FSM) study, methods of stool storage and DNA extraction are compared to examine their impact on DNA sequence analysis results. The Controlled Feeding Experiment (CaFE) addresses the effects of controlled diets on the gut microbiome. In the Cross-sectional Study of Diet and Stool Microbiome Composition (COMBO), the effects of diet analyzed using surveys and deep sequencing of stool specimens. The fourth study, Pediatric Longitudinal Study of Elemental Diet and Stool Microbiome Composition (PLEASE), examines the effects of an elemental diet treatment on pediatric patients diagnosed with inflammatory bowel disease (IBD), particularly Crohn&#39;s disease. Fecal Storage Methods (FSM): Cross-sectional study Controlled Feeding Experiment (CaFE): Controlled trial Cross-sectional Study of Diet and Stool Microbiome Composition (COMBO): Cross-sectional study Pediatric Longitudinal Study of Elemental Diet and Stool Microbiome Composition (PLEASE): Longitudinal cohort study

  Study phs000252