6808 results for "get free fc 26 coins Buyfc26coins.com is FC 26 coins official site..P1Ah"

in 28.85 milliseconds.

• Investigation of mutational signatures associated with DNMT3A deficiency (2019-04-03)

  Mutational signatures have been shown to be attributable to specific genetic contexts, such as mutations in DNA repair genes. DNMT3A is a DNA methyltransferase that helps maintain the DNA methylation pattern in a site-specific manner and may participate in DNA repair or the stress response. We have identified an adult individual who is a germline mosaic for a DNMT3A mutation. We have obtained clonal lymphoblastoid cells (LCLs) from the subject representing both WT and mutant lines grown in the same individual for >50 years. These clones represent a unique opportunity to examine the mutational impact of the DNMT3A mutation in a well-controlled setting. Our goal is to perform WGS on whole blood, representing the pool, as well as several WT and several mutant clones, in order to investigate the contribution of DNMT3A to mutation rates and signatures. . This dataset contains all the data available for this study on 2019-04-03.

  Dataset EGAD00001004889

• 36 mouse plasma cell-free DNA cases

  36 mouse plasma cell-free DNA cases

  Dataset EGAD00001008810

• Splicing signature analysis of RNU4-2, RNU5A-1 and RNU5B-1

  Pathogenic variants in the snRNA RNU4-2 were recently described as a frequent cause of neurodevelopmental disorders. In our study we further delineate the phenotype associated with RNU4-2 and we also identify pathogenic variants in RNU5A-A and RNU5B-1. Capture-based RNA-Seq were performed to compare splicing pattern between affected and control individuals. A strong signature based on alternative 5' splice site usage was found for RNU4-2 patients, and we suggest an either 5' or 3' signature depending on the variant's localiztion in U5 genes.

  Study EGAS50000000889

• A Machine Learning Tool Integrating Circulating Cell-Free DNA Methylation with Clinical Variables for Non-Invasive Diagnosis of Liver Graft Pathology

  Liver Transplant Recipients (LTRs) with elevated liver enzymes can develop graft injury due to various etiologies, such as T-cell mediated rejection (TCMR) and NASH (NASH-LT). While liver biopsy is the gold standard method for diagnosis of graft pathology, it is invasive and is associated with risks. The goal of our study was to develop a Machine Learning (ML) tool integrating clinical variables with methylation patterns on circulating DNA in plasma as a non-invasive diagnostic tool of graft injury. We generated methylation profiles of circulating DNA in a pilot study of 43 LTRs (11 NASH-LT, 19 TCMR, and 13 Control-LT), and developed an L2 multinomial logistic regression ML approach across 101 bootstrapped models to distinguish between the graft conditions. NASH was associated with distinctive methylation patterns on genes involved in fatty acid metabolism, while methylation of platelet-derived growth factors was identified in patients with TCMR. Our ML model achieved a mean multi-classification accuracy of 0.91, with mean specificity and sensitivity of 0.94 and 0.91, respectively. The model was found to be particularly adept at detecting TCMR and Control-LT, with true positive rates (TPRs) of 95% and 90%, and areas under the curve (AUROC) of 0.992 and 0.985, respectively. For NASH-LT, the models achieved a performance with a TPR of 82% and an AUROC of 0.991. These preliminary results suggest that our newly developed ML tool, leveraging cell-free DNA methylation and clinical variables, is a promising non-invasive classifier of graft pathology.

  Study EGAS00001007171

• How to upload GPG files

  Uploading files Users that holds an ega-box-XXX account can upload files using either INBOX or FTP. Users who have a Submitter role associated with their email will only be able to upload files using INBOX. Before uploading your files please make sure that any files that will be uploaded to EGA do not use special characters in their naming convention such as # ? ( ) [ ] / \ = + < > : ; " ' , * ^ | &. This can cause issues with the archiving process, leading to problems for end users. The EGA is a shared, public service with limited storage. In order to manage the available resources, we enforce a limit of 10Tb per submission account at any one time. Please do not exceed this limit. INBOX FTP The FTP is only compatible with files encrypted using the EGACryptor tool Before uploading Once your submission files have been prepared using the EGAryptor, the resulting encrypted files and associated md5sum files can be uploaded to your submission account using Aspera or FTP. The EGA is a shared, public service with limited resources. In order to manage the available resources, EGA submission boxes should not exceed 8Tb in size, and cannot exceed 12Tb. If you are approaching this limit please contact contact EGA Helpdesk so that we can advise on how to register the associated metadata and trigger the archiving of files, so that you can continue with your submission. If we note that your submission account increases above 10Tb on a consistent base your password will be changed until metadata is associated. Aspera Download Aspera Using Aspera FTP FTP windows FTP Linux / Unix FTP client (Filezilla) FTP and TLS Troubleshooting Troubleshooting Aspera Download Aspera is a commercial file transfer protocol that may provide faster transfer speeds than ftp especially over longer distances. The Aspera ascp command line client. Please select Aspera Connect. The ascp command line client is distributed as part of the aspera connect highperformance transfer browser plugin and is free to use, without registration. The minimum required version of the IBM Aspera Cli is V4. Further instructions. Using the Aspera ascp command line program The location of the ascp program in the filesystem: Mac: on the desktop go cd /Applications/Aspera\ Connect.app/Contents/Resources/ there you'll see the command line utilities where you're going to use ascp. Windows: the downloaded files are a bit hidden. For instance, in Windows 7 the ascp.exe is located in the users home directory in: AppData\Local\Programs\Aspera\Aspera Connect\bin\ascp.exe Linux: should be in your user's home directory, cd /home/username/.aspera/connect/bin/ there you'll see the command line utilities where you're going to use ascp. Your command should look similar to this: ascp -P33001 -O33001 -QT -l300M -L- /path/file ega-box-N@fasp.ega.ebi.ac.uk:/path If you wish to upload several files without being requested the password, please use the below command : ASPERA_SCP_PASS=ega-box-password ascp -P33001 -O33001 -QT -l300M /path/file ega-box-N@fasp.ega.ebi.ac.uk:/path/ Explanation of parameters l300M option sets the upload speed limit to 30MB/s. You may wish to lower this value to increase the reliability of the transfer. L option is for printing logs out while transferring files to upload can be a file mask (e.g. '/homes/submitter/*.srf) or a list of files. ega-box-N is your submission account login. Add k2 switch for transfer restarts Check the command line transfer usage for more configuration details. Using FTP to upload your prepared files Use your preferred ftp client. For example, lftp is a popular choice for Linux and Mac users. Use binary mode for file transfers. Use ftp.ega.ebi.ac.uk as the target host. Login with your ega-box username and password. Upload files to your private ega-box upload area. Depending on your network setting you might wish to start FTP in passive or active mode. Using default FTP command line client in Windows Start the command line interpreter: press WinR, type cmd, hit enter Enter ftp ftp.ega.ebi.ac.uk Enter your submission username Enter your submission password Type binary to enter binary mode for transfer To see a list of available ftp commands type help. Type ls command to check the content of your submission account. Type prompt to switch off confirmation for each file uploaded. Use mput command to upload files: mput *.bam* Use bye command to exit the ftp client. Use exit command to exit the command line interpreter. Using default FTP command line client in Linux / Unix Open a terminal and type ftp ftp.ega.ebi.ac.uk Enter your submission username Enter your submission password Type binary to enter binary mode for transfer To see a list of available ftp commands type help. Type ls command to check the content of your submission account. Type prompt to switch off confirmation for each file uploaded. Use mput command to upload files: mput *.bam* Use bye command to exit the ftp client. Using FTP client FileZilla We recommend the use of FileZilla, a free FTP client . FileZilla is open source software distributed free of charge under the terms of the GNU General Public License. Use the following connection details (File - Site Manager) and add yoursubmission account username and password: Using FTP client FileZilla Select the files you wish to upload and then select upload: Using FTP client Filezilla Using LFTP with TLS We recommend the following to force the use of a secure connection. lftp > set ftp:ssl-force yes We also recommend setting the following for not encrypting the bulk data itself for performance reasons (theauthentication will still be encrypted): lftp > ftp:ssl-protect-data no In order to verify the certificate,the recommended way would be to use the CA certificates from your machine. To do that use this command in lftp adjusting the path to your ca-certificates location. lftp > ssl:ca-file "/etc/ssl/certs/ca-certificates.crt" If that is not possible or certificates are old and you can't update them, you can download the certificates needed from Quo Vadis Digital Repository The two certificates to download in PEM format are: QuoVadis Root CA2 G3 QuoVadis EV SSL ICA G3 Then you can concatenate them in a file one after the other and save it as lftp-certificates.pem Once this is done you have to point the ssl:ca-file variable to the path lftp > set ssl:ca-file "/path/to/lftp-certificates.pem" Also note that you can save this configuration at ~/.lftp/rc Another option is to download the certificates and add them to the ca-certificates of your machine. For example: In RHEL7 and cenots and others box the process to add the certificates globally is: Download the two certificates (in PEM or DER format, doesn't matter) and save them to "/etc/pki/ca-trust/source/anchors/" Run "update-ca-trust extract" Another less secure option is to turn off certificate verification with the following command: lftp > set ssl:verify-certificate false Troubleshooting If you are having problems with Aspera connection timeouts, it can be down to either one of the following. Transfers cannot start the connection fails instantly. Ensure that TCP traffic on port 33001 is allowed (open) for outbound connections through your computer's firewall and network's firewall. The connection is made, transfers are started, but 0 bytes (0%) are uploaded for each file. Ensure that UDP traffic on port 33001 is allowed (open) for outbound connections through your computer's firewall and network's firewal

  Documentation submission/data/uploading-files/ftp

• eMERGE Network Study of the Genetic Determinants of Resistant Hypertension

  The electronic Medical Records and Genomics (eMERGE) Network is a consortium of five participating sites (Group Health Seattle, Marshfield Clinic, Mayo Clinic, Northwestern University, and Vanderbilt University) funded by the NHGRI to investigate the use of electronic medical record systems for genomic research. The goal of eMERGE is to conduct genome-wide association studies in approximately 19,000 individuals using EMR-derived phenotypes and DNA from linked Biorepositories. Using electronic phenotyping methods, the consortium used DNA samples from all participating sites to explore the genetic determinants of resistant hypertension. Treatment resistant hypertension is a common health problem in the clinical setting. A basic definition of resistant hypertension included subjects with uncontrolled blood pressure despite use of three antihypertensive medications or subjects requiring four or more medications to maintain control. Other conditions, such as secondary causes of hypertension, were exclusions. Site and participants include: Vanderbilt University: BioVU, Vanderbilt&#39;s DNA databank, is an enabling resource for exploration of the relationships among genetic variation, disease susceptibility, and variable drug responses, and represents a key first step in moving the emerging sciences of genomics and pharmacogenomics from research tools to clinical practice. BioVU acquires DNA from discarded blood samples collected from routine patient care. The biobank is linked to de-identified clinical data extracted from Vanderbilt&#39;s EMR, which forms the basis for phenotype definitions used in genotype-phenotype correlations. Marshfield Clinic: The Marshfield Clinic Personalized Medicine Research Project is a population-based biobank in central Wisconsin with more than 20,000 adult subjects who provided written, informed consent to access their medical records and provided a blood sample from which DNA was extracted and plasma and serum stored. In addition to an average of 30 years of medical history data, a questionnaire about environmental exposures, including a detailed food frequency questionnaire, is available to facilitate gene/environment studies. Northwestern University: The NUgene Project is a repository with longitudinal medical information from participating patients at affiliated hospitals and outpatient clinics from the Northwestern University Medical Center. Participants&#39; DNA samples are coupled with data from a self-reported questionnaire and continuously updated data from our Electronic Medical Record (EMR) representing actual clinical care events. Northwestern has a state-of-the art, comprehensive inpatient and outpatient EMR system of over 2 million patients. NUgene has broad access to participant data for all outpatient visits as well as inpatient data via a consolidated data warehouse. NUgene participants consent to distribution and use of their coded DNA samples and data for a broad range of genetic research by third-party investigators. Group Health(GH)/University of Washington (UW): Aging and Dementia eMERGE study biorepository leverages rich population-based longitudinal data from both electronic medical records and in-depth research data to explore genome wide associations. Participants include Seattle-area members of GH (a large integrated health care system in Washington State) consented and enrolled in 1) the UW Alzheimer&#39;s Disease Patient Registry (ADPR) and 2) the Adult Changes in Thought (ACT) study. The ADPR (PI: Eric B. Larson; NIH/NIA U01 AG 006781) is a population-based registry of incident dementia cases designed to identify all new Alzheimer&#39;s Disease cases within GH from 1987 to 1996. Medical history, physical, laboratory testing, and neuropsychological testing were performed on all consenting potential cases for determination of dementia status by a consensus conference. The study base of the ADPR population was stable with an attrition rate of less than 1%/year. The ACT study (PI: Eric B. Larson; NIH/NIA U01 AG 006781) is an ongoing community-based cohort study of aging and dementia. The original cohort of 2,581 randomly selected dementia-free members age 65 and older was enrolled in 1994-1996 and expanded by 811 in 2000-2002. Continuous enrollment to maintain a cohort of 2,000 dementia free persons began in 2005. Participants receive biennial assessment including cognitive status determination. The ACT sub-sample is stable; for the original cohort, median enrollment in GH was 19 years prior to joining the ACT study, and 85% of the cohort has &#8805; 10 years of GH enrollment. DNA for the ADPR participants were obtained through a companion study, Genetic Differences in Cases and Controls (PI: Walter Kukull; NIH/NIA R01 AG007584). DNA obtained through both studies were extracted from blood using Gentra Systems Puregene methods. DNA concentration is determined by UV optical density. All samples are checked for quality by 260/280 ratio. For long-term storage, samples are aliquoted and stored at -70&#176;C. Mayo Clinic: The Mayo biobank is a disease-specific biobank for vascular diseases including peripheral arterial disease (PAD). PAD patients were identified from individuals referred to the non-invasive vascular laboratory for lower extremity arterial evaluation. Since 1997, laboratory findings have been recorded into an electronic database employing an in-house software package for data archiving and retrieval; this data becomes part of the Mayo EMR. Patients referred to the center with suspected PAD undergo a comprehensive non-invasive evaluation including the ankle-brachial index (ABI) - the ratio of blood pressure measured in the upper arms divided by blood pressure measured at the ankles. Controls subjects are identified from patients referred to the Cardiovascular Health Clinic for stress ECG. The prevalence of PAD in patients with normal exercise capacity who do not have inducible ischemia on the stress ECG, was &lt;1%. Data regarding risk factors for atherosclerosis such as diabetes, dyslipidemia, hypertension, and smoking are ascertained from the EMR.

  Study phs000297

• How to upload Crypt4GH files

  Uploading files Users who hold an ega-box-XXX account can upload files using either INBOX or FTP. Users who have a Submitter role associated with their email will only be able to upload files using INBOX. Before uploading your files, please make sure that any files that will be uploaded to EGA do not use special characters in their naming convention, such as # ? ( ) [ ] / \ = + < > : ; " ' , * ^ | &. This can cause issues with the archiving process, leading to problems for end users. The EGA is a shared, public service with limited storage. To manage the available resources, we enforce a limit of 10TB per submission account at any one time. If you exceed this limit, a “permission denied” message will be displayed. This will prevent you from uploading more files, but connecting to your inbox.For submissions larger than 10TB, please perform uploads in 10TB batches: register all the metadata and then finalise the submission. Upload the next batch of files and repeat the same metadata registration and finalisation process until you have completed the file upload. Further information can be found in the SP documentation. INBOX FTP The INBOX is only compatible with files encrypted using the Crypt4gh tool Before uploading If you are not a registered EGA user, you will first need an EGA user account. Please note that it may take a few days for your account to be activated, as it needs to be vouched for by the EGA Helpdesk. Once your account is validated, you will be able to request a submitter role. [Optional] Meanwhile, you can create and add your public key to your EGA account profile. This option is not available for old submission accounts (e.g., ega-box-NNN). As soon as you have been granted a submitter role, you will be able to connect with your username and password to the EGA inbox using the SFTP protocol. If you have also registered a public key in your profile, you can also connect using this key. To upload files to your account, you can use the graphical user interface (GUI) or the command line. Graphical User Interface (GUI)We recommend using FileZilla, a free, open-source FTP client. However, you can use any other GUI that allows connecting over the SFTP protocol. For FileZilla as your GUI, follow these steps to upload files: Create a new connection in Site Manager (File > Site Manager) and select the following options (Figure 1): Protocol: SFTP - SSH File Transfer ProtocolHost: __EGA_INBOX_DOMAIN__Logon Type: Key fileUser: your EGA usernameKey file: Path/to/your/private_keyFigure 1: Process of establishing a new connection to __EGA_INBOX_DOMAIN__ using a key file as the logon method in FileZilla. The figure showcases the FileZilla version 3.52.2 operating on IOS v11.2.3. By following the depicted steps, users can create a secure and efficient connection to the inbox, ensuring seamless data transfers.Click Connect, and you will log in remotely to your home directory. You can think of this folder as a storage "in the EGA cloud" in which you will add your files for the EGA. The uploading area has three folders:To-encrypt: Files uploaded in this folder will be encrypted automatically on the fly.Encrypted: Files uploaded in this folder must already be encrypted with Crypt4gh. Upload your files here if your connection is unstable or you have problems completing the upload into-encrypt.Etc: This folder contains two files that allow the server to show you your username and group instead of some internal numbers. Please do not upload files here; otherwise, you will obtain a permission denied error. Find the files you want to upload by browsing your local storage (left side of your screen in FileZilla). Select all the files you want to upload, then right-click on them and select Upload (Figure 2). Figure 2: Step-by-step process of manually uploading files to __EGA_INBOX_DOMAIN__ using FileZilla, with FileZilla version 3.52.2 operating on IOS v11.2.3. The figure demonstrates how users can transfer data from their local storage to the "EGA cloud" by following the depicted steps Please note that regardless of which folder you upload your files in, both folders (to-encrypt, encrypted) will point to the same path (/) (Figure 3). Therefore, you will see your files in both folders. Figure 3: Both folders, to-encrypt and encrypted, point to the same path (/)" If your connection is unstable, please encrypt your files first using Crypt4gh. Then upload them to the ‘encrypted’ folder. The example above shows how to connect to __EGA_INBOX_DOMAIN__ using the private key. However, if you prefer to log in using your credentials, you can do so. Please go to the Frequently Asked Questions (FAQs)  for more information. SFTP command line To upload files securely to your private area of the EGA, you can use SFTP(Secure File Transfer Protocol) with your favorite FTP client. Here's what you need to know to get started: Connect to the target host __EGA_INBOX_DOMAIN__. This is the new hostname for the EGA SFTP service. Log in with your EGA username and key files (or password). Upload files to your private EGA inbox to ensure that only you can access the files. By following these steps, you can securely upload your files to the EGA for safe storage and sharing. Using the SFTP command line client in Linux/Unix Open a terminal and type sftp username@hostnameEnter your EGA passwordTo see a list of available SFTP commands, type helpsftp> put – Upload filesftp> get – Download filesftp> cd path – Change remote directory to ‘path’sftp> pwd – Display remote working directorysftp> lcd path – Change the local directory to ‘path’sftp> lpwd – Display local working directorysftp> ls – Display the contents of the remote working directorysftp> lls – Display the contents of the local working directoryType the "put" command to upload files. For example: put *.bamUse the bye command to close the connection (SFTP session). After uploading- Once you have uploaded files to the inbox, please bear in mind that the checksum needs to be calculated, which can take up to two days. You will only be able to link your files to a run/analysis once the encrypted checksum has been calculated.- When linking your files to the 'Run' or 'Analysis', ensure that the file name matches the file path '/name' in the INBOX folder.- Please delete the files from your SFTP INBOX after all the runs/analyses have been registered and files are ingested (SP > Files > Files ingested). This will clear your inbox space an allow you to upload more files. This will also prevent the files from reappearing in your Submitter Portal inbox. Frequently Asked Questions Specific to the inbox What username should I use to log in to my inbox? The authentication process for logging in to the EGA website, as well as accessing your inbox and outbox, requires the use of your username.  If you have forgotten your registered username, please contact our Helpdesk team for assistance. How are checksums calculated in your inbox? If you encrypt the file beforehand and upload it to the "encrypted" folder, the unencrypted checksum will not be calculated until the file is ingested (i.e., until it is used in a run/analysis). If the file is uploaded to the "to-encrypt" folder, then both checksums are calculated.Please bear in mind that after files have been uploaded to the inbox, the checksum must be calculated, which can take from a few hours to two days.  Specific to using keys to authenticate Can I access one EGA account from different devices? Yes, you can access your account from different devices by linking several public keys to your EGA account. Each device can generate a unique public-private key pair, and the corresponding public keys can be linked to the same account. This way, you can use different public keys on different devices and still have access to the same account and data. I have several keys and I don't remember which one is which When generating SSH keys, it's a good practice to add a comment using the -C flag. This will allow you to add a descriptive tag to your key, making it easier to identify later on. Here's an example command that generates an SSH key with a comment: ssh-keygen -t ed25519 -C work-pass In this example, we're generating an ed25519 SSH key with the comment work-pass. Once you have multiple keys with different comments, you can use the comments to easily identify each key. To view the comments for your existing SSH keys, you can use the following command: ssh-keygen -l -f /path/to/key This will display the key fingerprint and the associated comment. By checking the comments, you should be able to identify which key is which. What if I can't find my SSH keys for uploading files with a key file, and how can I use new keys? If you can't find your SSH keys, don't worry - you can make new ones. To do this, open your terminal or command prompt and type a command to make a new SSH key. You can pick a name for the key, and choose a password to keep it safe. After making the key, you can add the new key to your account or server where you want to upload files using the key file. This usually involves copying and pasting the key's "public" (e.g. file.pub) part to the right place. If you lose track of the key again, just make a new one and add it again. Keep in mind that SSH keys belong to you and your computer, so if you switch computers or accounts, you'll need to make new keys. I don't want to type the passphrase every time I use the key. What can I do? You can use an ssh-agent to avoid typing the passphrase every time you use the key. An ssh-agent is a program that stores your private keys in memory and provides them to ssh when needed. You can add your key to the ssh-agent using the command ssh-add followed by the path to your key file.Here's an example of the steps to follow: Open a terminal window.Start the ssh-agent by typing the command eval $(ssh-agent).Add your key to the ssh-agent by typing the command ssh-add [key filepath]. For instance, if your key file is located in the home directory with the name mykey, the command will look like this: ssh-add ~/mykey After adding your, key to the ssh-agent, you should be able to use ssh without having to enter your passphrase every time. Can I use my password for authentication (without my private key)? If you prefer to use your username and password for authentication instead of your private key, you can still do so. When using a Graphical User Interface (GUI) such as FileZilla, you can select Ask for password as your Logon Type (Figure 3). This option will prompt you to enter your password when you click Connect, instead of using your private key. Figure 3: This option will prompt you to enter your password when you click "Connect", instead of using your private key. Figure 3: Process of establishing a new connection to __EGA_INBOX_DOMAIN__ using your password as the logon method in FileZilla. The figure showcases the FileZilla version 3.52.2 operating on IOS v11.2.3. By following the depicted steps, users can create a secure and efficient connection to the inbox, ensuring seamless data transfers. It's worth noting that using a password for authentication can be less secure than using an SSH key, as passwords can be more easily compromised through various means. However, if you choose to use your password for authentication, selecting "Ask for password" as your Logon Type is a good way to do so securely via a GUI. Why is it better to use my key and not my password? SSH keys for authentication is generally considered to be more secure and convenient than using passwords. SSH keys are more difficult to crack than passwords, and they can be restricted to specific users and machines, giving you more control over access. Once you set up your SSH keys, you can use them to authenticate quickly and easily, without having to enter a password every time. This makes automation of tasks, such as uploading encrypted files, much simpler. Additionally, SSH keys provide better logging, allowing you to keep track of who is accessing your systems and when. All in all, using SSH keys is a good practice for improving security and convenience in your authentication process.

  Documentation submission/data/uploading-files/inbox

• WES Elucidation of Pathogenetic Mechanisms for Immune System Disorders and NIAID Pilot of Genetic Incidental Finding Management

  Background: - There are many types of immune disorders. These range from rare immune deficiencies to allergies to autoimmune disease like rheumatoid arthritis. Genes are the instructions our body uses to work and develop. A new technology called whole exome sequencing may help find the cause of these disorders. Whole exome sequencing is a way to look at many genes at once for errors. Researchers hope to find new gene changes that lead to immune disorders. Additionally, researchers are interested in finding the best way to manage unexpected but important findings by whole exome sequencing. Objectives: - To better understand genetic causes of immune system disorders. Also, to better understand people s thoughts and feelings about immune system disorders and new genomic testing. Eligibility: - People ages 0 100 with an immune disorder or a relative with an immune disorder. People must be at least 2 to be evaluated at the NIH clinical center. People must be at least 12 to do the survey/interview portion of the study. Design: Participants will have their genes sequenced. They may be asked for a new sample of blood. If participants cannot come for a study visit, they can have a blood sample collected by their local lab or doctor and sent by mail. Researchers may or may not find the cause of the participant s immune disorder. Participants will learn that information. Some participants may be asked to return to NIH to get results and have more tests. Researchers may share information with other studies. The data will be anonymous. For the survey part of the study, participants will answer questions about their or their relative s immune disorder. They will also answer about their thoughts and feelings about genomic testing. Some participants will be asked for a brief interview to ask more about the survey topics. There may be more follow-up after several months. From clinicaltrials.gov

  Study phs001561

• Endoresist panel sequencing

  Patients with endocrine-resistant breast cancer in Stockholm Sweden. DNA obtained from patients primary and relapse tumors, and tumor-free lymph nodes used as germline control. DNA was extracted from formalin-fixed paraffin-embedded tissue and sequenced by 370-gene panel-based sequencing with Kapa HyperPlus library preparation and Twist Bioscience hybrid capture. Custom bait sets (panels) from Twist Bioscience. Paired end 2x150 bp using NovaSeq X. The data is presented as fastq-files.

  Dataset EGAD50000000350

• Pre-diagnostic saliva microbiota of Finnish children with autoimmune diseases

  Pre-diagnostic saliva microbiota samples of Finnish children (aged 11/12 years). This is a case-control study, where case refers to the children who developed Type 1 DM or IBD later in life and control refers to the children who were free from these diseases. The aim of the study was to find biomarkers in saliva microbiota that may help us predict DM or IBD before the onset of these diseases.

  Dataset EGAD00001009984