10994 results for "fc 26 best way to get coins Visit Buyfc26coins.com Gyors és hatékony szolgáltatás. Hamarosan visszatérek több FC 26 érmeért..4w1a"

in 17.89 milliseconds.

• National Cancer Institute (NCI) TARGET: Therapeutically Applicable Research to Generate Effective Treatments

  The Therapeutically Applicable Research to Generate Effective Treatments (TARGET) Initiative seeks to accelerate research in novel marker and drug development, along with understanding the molecular basis of pediatric malignancy, through identification of genomic changes associated with the following childhood cancers: Acute Lymphoblastic Leukemia (ALL) - A fast-growing type of blood cancer in which too many immature white blood cells are found in the blood and bone marrow. Acute Myeloid Leukemia (AML), including AML Induction Failure cases (AML-IF) - Another type of blood cancer marked by too many myeloblasts, an alternate type of immature white blood cell, are found in the blood and bone marrow. Upon diagnosis, AML patients without high-risk genetic markers undergo standard chemotherapy regimen, called the primary induction phase, to eliminate most cancer cells and induce a remission state. Clear Cell Sarcoma of the Kidney (CCSK) - A rare type of kidney cancer, in which the inside of the cells looks clear when viewed under a microscope. Clear cell sarcoma can spread from the kidney to other organs, most commonly the bone, but also including the lungs, brain, and soft tissues of the body. Neuroblastoma (NBL) - Cancer of cells of the sympathetic nervous system. Cancer Model Systems (MDLS), including PPTP - MDLS includes acute leukemia cell lines and xenografts with matched primary and/or relapsed tumor information, NBL cell lines and xenografts with matched controls, kidney tumor cell lines, normal brain tissues, and embryonic stem cell lines that were sequenced for some TARGET disease projects. Osteosarcoma (OS) - A cancer of the bone that primarily affects children and adolescents. Rhabdoid Tumor (RT) - A rare, fast-growing cancer that usually forms in the kidney or central nervous system (the brain and spinal cord) but can also form in soft tissues in other areas of the body. Rhabdoid tumors tend to spread quickly, are hard to treat, and have a poor prognosis. Wilms' Tumor (WT) - A cancer of cells in the kidney that can spread to the liver, lung and lymph nodes. More information can be found about each TARGET subproject by following the links on the top of this page. Together these cancers account for the majority of the more than 10,000 childhood cancer cases diagnosed in the United States each year. TARGET has employed a set of advanced and complementary genome analysis technologies, including large scale 2nd and 3rd generation genome sequencing, to strategically characterize alterations in both gene expression and in genomic structure (such as deletions and amplification) that are involved in childhood cancers. The goal of this coordinated effort has been to create a comprehensive genomic and transcriptomic profile of each cancer. Integrated analysis of the TARGET data has identified those genes that are either altered in their expression level or mapped to the chromosome regions of deletion/amplification/translocation, as these genes represent strong candidates for therapeutic targeting. To learn more about the TARGET project, which is now completed, visit the website at https://www.cancer.gov/ccg/research/genome-sequencing/target. TARGET data is accessible at the NCI's Genomic Data Commons (GDC) via the GDC's Data Portal and from each of the TARGET Publication Pages at the GDC (Please see the "Supplemental Links" section of any TARGET publication's "Publication Information and Associated Data Files page" at the GDC.). Available datasets include raw sequencing data, datasets generated by the original TARGET research teams (fully annotated clinical information and higher-level/analyzed molecular characterization data - gene expression, copy number variation, epigenetics, targeted sequencing), as well as higher level data generated by the GDC. Please see the TARGET Use and Publication Guidelines for updated details on the sharing of any TARGET substudy data, including how to cite TARGET.

  Study phs000218

• Center for Common Disease Genomics [CCDG] - Inflammatory Bowel Disease (IBD) - Global Microbiome Conservancy Host Exomes

  The human body is a complex ecosystem, hosting tens of billions of bacteria, primarily in the gut. This community, known as the 'gut microbiome', is vital to human health, affecting functions ranging from metabolism, immunity, and development, to behavior. Conversely, reduced microbiome diversity and other imbalances of the gut community (dysbiosis) are associated with many diseases of the industrialized world, such as metabolic syndrome, asthma, and inflammatory bowel diseases among others. Microbiome-based interventions thus hold the potential to revolutionize our understanding of, and therapeutic approaches to, many aspects of human health and disease. Despite many advances, current understanding of the human microbiome is largely limited to majority ethnic groups in industrialized nations, and does not reflect the full diversity of human commensal microbiota. In addition to the scientific ramifications of minority underrepresentation, there are significant translational and ethical implications as well: First, failing to capture the full diversity of healthy human microbiota may limit our ability to understand and generate effective therapeutics for many microbiome-associated diseases. Second, underrepresented groups are less likely to benefit from microbiome-based medical advances tailored to well-studied populations, propagating healthcare inequities. The window of opportunity to characterize human microbiome diversity is closing rapidly. Human gut microbial diversity is diminishing around the globe, due to the spread of Westernized diets and lifestyles, which are associated with reduced microbiome biodiversity. The Global Microbiome Conservancy (GMbC) is a non-profit collaboration between scientists and communities around the world that aims to 1) preserve the full biodiversity of the human gut microbiome, 2) characterize its evolution across populations and host lifestyles and 3) investigate its interactions with the human host. We are collecting gut microbiome and human DNA samples from diverse populations around the world, from isolated groups to urbanized populations, to culture and study this essential biodiversity and to preserve it in a living "seed bank" as a long-term safeguard against future extinctions. The National Human Genome Research Institute (NHGRI) has funded a collaborative large-scale genome sequencing effort to comprehensively identify rare risk and protective variants contributing to multiple common disease phenotypes. Called the Centers for Common Disease Genomics (CCDG), this initiative will explore a range of diseases with the ultimate goal of: Undertaking variant discovery for enough different examples of disease architectures and study designs to better understand the general principles of the genomic architecture underlying common, complex inherited diseases. Understanding how best to design rare variant studies for common disease. Developing resources, informatics tools, and innovative approaches and technologies for multiple disease research communities and the wider biomedical research community. The initial focus of the CCDGs will be in cardiovascular disease (early-onset coronary artery disease, atrial fibrillation, hemorrhagic stroke), neuropsychiatric disease (epilepsy, autism), and autoimmune/inflammatory disease (type 1 diabetes, inflammatory bowel disease). The Broad Institute is one of four selected CCDG project centers. Both exome and genotyping information of GMbC participants will help understanding how recruited human populations are structured and genetically related. This human genetic structure will be analyzed in light of gut microbiome compositional and genomic differences to illuminate associations between specific microbiome traits and human groups and the evolutionary processes involved in the co-evolution of human hosts and their gut microbiome. It will also provide variant information for critical genes shaping the composition of microbiomes, such as genes involved in innate and adaptive immunity (e.g. antimicrobial peptides) or in the regulation of the immune response (e.g. Nod2). Association studies between specific variants in these genes and microbiome features will be performed, which will then be validated with in vitro and in vivo experiments. Human data from GMbC cohorts will also increase the genetic diversity of human populations, providing additional variant information for many susceptible loci that were found to be associated with Crohn's disease and ulcerative colitis. The whole genome sequencing data generated is comprised of samples from diverse and indigenous populations. Raw sequencing data, metadata, vcf and phenotype data at the individual level for a subset of the cohort's samples are available at https://anvilproject.org/data. For questions about availability, contact help@lists.anvilproject.org. Microbiome data for the samples sequenced in this study can be found in phs002235 Global Microbiome Conservancy Sequence Data.

  Study phs002205

• Programmatic submission based on XML

  Programmatic submissions (XML based) For further information please check our Submission FAQs, submission quickguide as well as submission terms! Introduction Besides the Submitter Portal tool, EGA supports programmatic sequence and clinical data metadata submissions. If you are not sure what this means, you may want to explore our brief metadata introduction. Programmatic submissions are recommended for array-based submission. Moreove, it may be of help if your submission is recurrent or it is difficult to manage manually due to its sheer size. Otherwise, we highly recommend using the Submitter Portal to perform submissions. In this page we will guide you through the required steps to programmatically submit data to the EGA. Programmatic submissions require your metadata to be structured for an easy and straightforward validation and archival. It basically consists in formatting your metadata as Extensible markup language (XML) files and submitting them to the EGA using the WEBIN Before submitting metadata to the EGA, it is important to ensure that the information in your XML files is compliant with our standards. You can see further details on how these standards are maintained at EGA at our EGA Schemas documentation page. Using WEBIN, you can validate your XML files against EGA's schemas to ensure that your metadata is compliant before submission. WEBIN services WEBIN production service WEBIN test service We advise you to submit your metadata to the test service when submitting to the production service for the first time. The test service is identical to the production service except that all submissions will be discarded in the following 24 hours. This allows you to learn about the submission process without having to worry about data being submitted. Authentication Authentication is required each time a submission is made. The submission service uses HTTPS protocol for metadata encryption and identification to provide a secure submission environment. Data file upload Both Runs and Analyses reference files (e.g. FASTQ need to be uploaded to the EGA before these metadata objects are submitted. In other words, if you submit a Run that references a file that we cannot find associated with your account, the metadata submission will fail. See further details on how to upload your files in our File Upload documentation. Metadata model of the EGA Our metadata model is formed by multiple metadata objects. Check further details in our documentation at our EGA Schema documentation page. Working with EGA XMLs files Now that the basic concepts of the EGA metadata have been described, you can start preparing your programmatic submission through XML. Here you will find the guidance on how to prepare the XML files. Programmatic Submission Tutorial Video Take a look at the Programmatic Submission Tutorial Video, which explains the workflow of a programmatic submission and goes over an example metadata submission. Programmatic Submission Tutorial Video. When building your XML files, we recommend using text editors (e.g.Sublime Text or VisualStudio) that allow you to visualise the structure of the XML with ease. Furthermore, these editors constantly check the consistency of the XML structure. Alternatively, and if the submission consists of a big number of objects (specially analyses), you may find the tool star2xml handy. This tool allows for a direct conversion between metadata in a tabular format (e.g. a spreadsheet) into XMLs. Identifying objects: Aliases and center names Every EGA object must be uniquely identified within the submission account using their alias attribute. The aliases can be used in submissions to make references between EGA objects. Let us dig into EGA's use of aliases and center names: alias: every object should have a name that is unique within your submission account. Once submitted successfully, every alias will be assigned a unique and permanent accession (EGA ID). refname: when an object references another by its alias, the alias of the referenced object goes into the "refname" attribute of the referencing object. For example, if a sample has the alias "sample1", and an experiment uses this sample, then the experiment's "EXPERIMENT/SAMPLE/refname" attribute should be "sample1". center_name: The "center_name" attribute is required within the submission XML and, if not provided when the object is submitted, it will be automatically filled using your default EGA account center_name. This element is the "controlled vocabulary acronym or abbreviation that is provided to the account holder when the account is first generated". If the submitter is brokering a submission for another institute, the submitter should use their special broker account name in broker_name while the data centre acronym remains in center_name. Log-in details should have been provided when you requested a submission account. Please contact our Helpdesk team if you have any questions. run_center: Many submitting centers contract out the actual sample sequencing to another center. In these cases, the sequencing center should be acknowledged in the run_center attribute. Again, this is controlled vocabulary and the acronym should be sought from EGA helpdesk before submitting. Please contact our Helpdesk team if you have any questions. Prepare your XMLs The goal of this section is to provide sufficient information to be able to create the metadata XML documents required for programmatic submissions. Please note, the EGA utilises the XML schemas maintained at the European Nucleotide Archive (ENA). It is important due to the fact that by using a similar system, some pieces of documentation from the ENA's programmatic submission can also help you with your programmatic submission to the EGA. For example, you can submit programmatically without using a Submission XML by following the steps at Submission actions without submission XML. A submission does not have to contain all different types of XMLs. For example, it is possible to submit only a few samples; or a study that is later to be referenced. You can submit each object one by one, or submit all in a batch: you choose what method of submission works best for you. We do recommend, nevertheless, that you submit the objects to be referenced (e.g. samples or studies) first, and the objects that reference these (e.g. experiments or datasets) afterwards. You can see a graphical view of these objects and their relationships at our EGA Schemas page. Independently of the submission scenario, you will always require a Dataset XML. The entity of a dataset is what is used to control access to the given data, in the form of runs or analyses. In other words, when a requester is granted access, it is through the dataset and the objects (e.g. runs or analyses) that the dataset contains, granting access to them in one go. Given the nature of the EGA, a dataset XML will always be required for the data access. First, we will differentiate between submissions of "raw" and "processed" data: Runs and Analyses, respectively. Run data submissions Raw data derives from instruments "as is". For example, a plain sequence file (e.g. FASTQ or unaligned BAM files) would be considered raw data. A typical raw (unaligned) sequence read submission consists of 8 XMLs: Submission Study Sample Experiment Run DAC Policy Dataset When technical reads (e.g. barcodes, adaptors or linkers) are included in the submitted raw sequences, a spot descriptor must be submitted to describe the position of the technical reads so that they can be removed. The following data files can be submitted without providing spot descriptor information in the experiment/run XML: BAM files (single reads) SFF files (single reads without barcodes) FastQ files (single reads without any technical reads) Complete Genomics files Analysis data submissions Processed data is, in some way, refined raw data. This includes raw data that has been processed by some form of analysis method (e.g. alignment, noise reduction, etc.). For example, an aligned sequence (e.g. BAM file), that was created using raw FASTQ files, would be a processed file. This category includes most types of data: sequence alignment files (e.g. BAM or CRAM), clinical data (e.g. phenopackets), sequence variation files (e.g. VCF), sequence annotation, etc. A typical EGA analysis data submission consists of 7 EGA XML: Submission Study Sample Analysis DAC Policy Dataset We accept three different types of analysis data submissions: BAM files (for multiple read alignments) VCF files (for sequence variations) Phenotype files (in any format) In anycase, keep in mind that samples must be created in order to be referenced in the analyses. In other words, the provenance of the information within the BAM, VCF and phenotype files Example XMLs Below you can find a non-extensive list of example XMLs with descriptive fields (i.e. explaining what to provide in each field). Furthermore, you can also find real examples (i.e. the true value of the provided fields) in our GitHub repository. Submission XML The submission XML is used to validate, submit or update any number of other objects. The submission XML refers to other XMLs. New submissions use the ADD action to submit new objects. Object updates are done using the MODIFY action and objects can be validated using the VERIFY action. Descriptive submission XML example True values submission XML example Study XML The study XML is used to describe the study containing a title, a study type and abstract as it would appear in a publication. Descriptive study XML example True values study XML example Please use the following notation within the property "STUDY_LINKS" when including PubMed citations in the Study XML: <STUDY_LINKS> <STUDY_LINK> <XREF_LINK> <DB>PUBMED</DB> <ID>18987735</ID> </XREF_LINK> </STUDY_LINK> </STUDY_LINKS> Sample XML The sample XML is used to describe the samples used to obtain the data, whether they were sequenced, measured in any other way, or have an associated phenotype. The mandatory fields include information about the taxonomy of the sample, sex, subject ID and phenotype. For example, the mandatory attribute fields for each sample would look like these, within the array of "SAMPLE_ATTRIBUTES": <SAMPLE_ATTRIBUTES> <SAMPLE_ATTRIBUTE> <TAG>subject_id</TAG> <VALUE>free text!</VALUE> </SAMPLE_ATTRIBUTE> <SAMPLE_ATTRIBUTE> <TAG>sex</TAG> <VALUE>female/male/unknown</VALUE> </SAMPLE_ATTRIBUTE> <SAMPLE_ATTRIBUTE> <TAG>phenotype</TAG> <VALUE>Free text, EFO terms (e.g. EFO:0000574) are recommended</VALUE> </SAMPLE_ATTRIBUTE> </SAMPLE_ATTRIBUTES> Sample is one of the most important objects to be described biologically, it is highly recommended that “TAG-VALUE” pairs are generated as SAMPLE_ATTRIBUTES to describe the sample in as much detail as possible. For example, were we to give the population ancestry of the sample, we could add a new attribute to the array, in which, for example, we would indicate that the sample derives from an individual of "Mende in Sierra Leone" (MSL), with an african ancestry: <SAMPLE_ATTRIBUTE> <TAG>Population</TAG> <VALUE>MSL</VALUE> </SAMPLE_ATTRIBUTE> Given that VALUE and TAG are free text, the combinations are limitless in order to give you full flexibility on the information you want to provide. We recommend you use the Experimental Factor Ontology (EFO) to describe the phenotypes of your samples. You can provide more than one phenotype by adding more items to the array of SAMPLE_ATTRIBUTES. Phenotypes considered essential for understanding the data submission should be provided. Each phenotype described should be listed as a separate sample attribute <SAMPLE_ATTRIBUTE> </SAMPLE_ATTRIBUTE>. There is no limit to the number of phenotypes that can be submitted. If a suitable EFO accession cannot be found for your phenotype attribute, please consider using another controlled ontology database (e.g. HPO, MONDO, etc.) before using free text. Descriptive sample XML example True values sample XML example Experiment XML The experiment XML is used to describe the experimental setup, including instrument platform and model details, library preparation details, and any additional information required to correctly interpret the submitted data. Where any of these values differ between runs, a new experiment object must exist, since runs are grouped by experiments. Each experiment references a study and a sample by alias, or if previously-submitted, by accession. Pooled data must be demultiplexed by barcode for submission. Descriptive experiment ( Illumina paired read ) XML example True values experiment ( Illumina paired read ) XML example Run XML The run XML is used to associate data files with experiments and typically comprises a single data file (e.g. a FASTQ file). Please note that pooled samples should be de-multiplexed prior submission and submitted as different runs. Descriptive run XML example True values run XML example Analysis XML Given that an analysis can be used to submit any type of processed data to the EGA, we will list below an example of each of the three most common types of analysis XMLs submitted to the EGA: sequence alignments (e.g. BAM files); sequence variation (e.g. VCF files); and clinical metadata or phenotypes (e.g. phenopackets). Regardless of the type of processed data submitted in the analysis, the analysis must be associated with a Study and can reference multiple types of other objects, from samples to experiments, if they are available at the EGA. Just like with Runs, whenever a file is submitted to the EGA through an analysis object, the file MD5 checksums must be present, in order for the EGA to validate file integrity upon transfer. This also includes index files when applicable (e.g. .bai.md5 files). Ideally, any analysis that uses a reference sequence for some kind of alignment (e.g. BAM, CRAM or VCF files), would contain metadata about the alignment, such as INSDC reference assemblies and sequences, by either using accessions (e.g. CM000663.1) or common labels (e.g. GRCh37). Read alignment (BAM) Analysis XML The Analysis can be used to submit BAM alignments to EGA. Only one BAM file can be submitted in each analysis and the samples used within the BAM read groups must be associated with Samples. Descriptive bam alignments XML example True values bam alignments XML example Sequence variation (VCF) Analysis XML The Analysis can be used to submit VCF files to EGA. Only one VCF file can be submitted in each analysis and the samples used within the VCF files must be associated with Samples. Download analysis XML (VCF) Phenotype files The Analysis XML can be used to submit phenotype files to the EGA. Only one phenotype file can be submitted in each analysis and the samples used within the phenotype files must be associated with EGA Samples. Download analysis XML (Phenotype) DAC XML The DAC XML describes the Data Access Committee (DAC) affiliated to the data submission. The DAC may consist of a group or a single individual and is responsible for the data access decisions based on the application procedure described in the POLICY.XML. As with any other object, if it was already submitted to the EGA, there is no need to submit it again: you can reference an existing object within the EGA. Hence, A DAC XML does not need to be provided if your submission is affiliated to an existing EGA DAC.. Further information on DACs can be found here, and you can always contact our Helpdesk team if you have further inquiries. Descriptive dac XML example True values dac XML example Policy XML The Policy XML describes the Data Access Agreement (DAA) to be affiliated to the named Data Access Committee. Descriptive policy XML example True values study XML example Dataset XML The dataset XML describes the data files, defined by the Run.XML and Analysis.XML, that make up the dataset and links the collection of data files to a specified Policy. The dataset xml is commonly the last metadata object to be submitted, since it references multiple other entities. Please consider the number of datasets that your submission consists of. For example, a case-control study is likely to consist of at least two datasets. In addition, we suggest that multiple datasets should be described for studies using the same samples but different sequence technologies. Descriptive dataset XML example True values dataset XML example Validating and submitting your EGA Validating EGA's XMLs through Webin After you have ensured that the XMLs are properly formatted and contain all the required information. You can proceed to validate and submit your data. Use the curl command to validate your XML file: Once you have prepared your XML file and asserted you have access to Webin, you can validate your XML file programmatically against EGA's schemas using the curl command. There are multiple ways in which you can validate your XMLs. This variety has to do with the fact that: (1) there are 2 instances of Webin (test and production); and (2) that validation is a default step during submission. In other words, any time that you submit your data through Webin, it will be validated automatically before being accepted. This allows for 4 possible routes of validation, all having the same validation result: validating or submitting to either the production service or the test service of Webin. For example, directly validating a "study" object XML in the testing service (wwwdev…) would look like the following: curl -u <USERNAME>:<PASSWORD> -F "ACTION=VALIDATE" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" In this command, you would need to replace <USERNAME> and <PASSWORD> with your EGA account username and password, respectively. You would also replace <INPUT_FILE> with the path to your XML file. A mock example would look like the following: curl -u ega-test-data@ebi.ac.uk:egarocks -F "ACTION=VALIDATE" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" The validation attempt can have different results depending on the given arguments: If your XML file is valid according to EGA's schemas, you will see a message indicating that your XML file is compliant. For example, see below for our mock example, where the "success" was "true" (i.e. no validation errors found). Nevertheless, notice how the "<STUDY accession=" is empty: it is because we were simply validating, so the study did not get an accession or ID. <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="receipt.xsl"?> <RECEIPT receiptDate="2023-04-11T15:19:28.850+01:00" submissionFile="submission-EBI-TEST_1681222768850.xml" success="true"> <STUDY accession="" alias="Mock example" status="PRIVATE"/> <SUBMISSION accession="" alias="SUBMISSION-11-04-2023-15:19:28:840"/> <MESSAGES> <INFO>VALIDATE action has been specified.</INFO> <INFO>Submission has been rolled back.</INFO> <INFO>This submission is a TEST submission and will be discarded within 24 hours</INFO> </MESSAGES> <ACTIONS>VALIDATE</ACTIONS> <ACTIONS>PROTECT</ACTIONS> If there are any errors or warnings, the tool will display them, allowing you to correct them before submitting your data to EGA. For example, in the following response, it is said that the object we were trying to submit was already existing, and therefore the "success" was "false". <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="receipt.xsl"?> <RECEIPT receiptDate="2023-04-11T15:12:35.609+01:00" submissionFile="submission-EBI-TEST_1681222355609.xml" success="false"> <STUDY alias="Example!_Human Microbiome Project SP56J" status="PRIVATE" holdUntilDate="2023-03-11Z"/> <SUBMISSION alias="SUBMISSION-11-04-2023-15:12:35:576"/> <MESSAGES> <ERROR>In study, alias: "Example!_Human Microbiome Project SP56J". The object being added already exists in the submission account with accession: "ERP127584".</ERROR> <INFO>VALIDATE action has been specified.</INFO> <INFO>Submission has been rolled back.</INFO> <INFO>This submission is a TEST submission and will be discarded within 24 hours</INFO> </MESSAGES> <ACTIONS>VALIDATE</ACTIONS> <ACTIONS>PROTECT</ACTIONS> If the curl command retrieves no response at all, please double check if your username and password are correctly provided. Also notice the "ACTION=..." argument passed to the Curl command. This specifies the action to take during the call to Webin, so we do not need a "Submission" XML just for a validation attempt. See more at submission actions without submission XML. Furthermore, validation of multiple files or objects (e.g. sample, experiment, study…) can be done in a single command by adding more arguments (i.e. '-F'). For example: curl -u <USERNAME>:<PASSWORD> -F "ACTION=VALIDATE" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" -F "SAMPLE=@sample.xml" -F "DATASET=@dataset.xml" As mentioned above, beside "validate" action in the test environment, you can also validate your metadata by three other methods: "Validate" in the production server. From our example above, you simply need to take the "dev" away from the URL. curl -u <USERNAME>:<PASSWORD> -F "ACTION=VALIDATE" "https://www.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" "Add" in the development server. From our example above, you would simply need to replace the action: from "validate" to "add". Whatever is submitted to this service will be discarded in 24h, so whether something gets submitted or not would not matter in the long run. curl -u <USERNAME>:<PASSWORD> -F "ACTION=ADD" "https://wwwdev.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" "Add" in the productionserver. A combination of the previous two methods, which would render this attempt into a submission. This path is just to be taken when you are sure your metadata is compliant and what you want to submit. curl -u <USERNAME>:<PASSWORD> -F "ACTION=ADD" "https://www.ebi.ac.uk/ena/submit/drop-box/submit/" -F "STUDY=@study.xml" What happens after the submission of a dataset XML? Once you have completed the registration of your dataset/s please contact our Helpdesk Team to provide a release date for your study. Please note that all datasets affiliated to unreleased studies are automatically placed on hold until the authorised submitter or DAC contact contact the EGA Helpdesk for the study to be released. We strongly advise you not to delete your data until EGA Helpdesk confirms that your data has been successfully archived.

  Documentation submission/metadata/submission/programmatic-submission-xml

• Submission FAQ

  Submission FAQ Before Submission Is the EGA the right archive for my data? TThe most suitable archive for your data is dependent on the type of data you are wishing to submit and whether the data require public or controlled access. Public access is defined as complete and open access to all submitted data. On the contrary, controlled access, exerted by the EGA, requires formal applications to be made to access the submitted data files and metadata. EGA only accepts human-derived data subject to controlled access. If your submission contains other types of data, please choose the appropriate repository for it (see image below): ENA, EVA, ArrayExpress, BioSD and GWAS catalog.  Should your submission be subjected to controlled access? Data access conditions are normally defined in the original informed consent agreements signed by the participants involved in your study. All data submitted to the EGA is subject to controlled access. These consents prevent the derived data files, potentially identifiable, from being dispersed by open and public access. Controlled access data often refers to human data derived from medical research and consortium projects. If in doubt, consult the informed consent agreements that apply to your study The EGA enables you to hold a submission before publication. What data types can be submitted to the EGA? Data types accepted by the EGA can be split into three categories: Sequences: both in generic and platform-specific formats. Array-based: from raw signal files to processed matrices. Phenotypes: all possible phenotype formats are accepted. All manufacturer-specific raw data formats derived from major next generation sequencing platforms are accepted. Also generic sequence formats: flat reads in a FASTQ file, aligned sequences (BAM or CRAM files) as well as sequence variation files in VCF format. All array-based technologies are accepted, including raw data, intensity and analysis files, without any restriction on data formats accepted. We also accept and distribute phenotype data (associated to the samples) in almost any format: from an image to a README file. How long does a submission take? Submissions to EGA come in a variety of formats and sizes, thus it is difficult for us to exactly predict how long a submission will take. We, therefore, advise all of our submitters to allow as much time as possible to make a submission. Based on previous records, we anticipate that the submission process may take at least one month. The submitter’s familiarity with the procedures, possible technical issues that may arise during submission and the amount of data that is being submitted are the main factors that will affect the length of the submission process. However, each step of a regular submission should be considered when estimating the time it would take: Encryption of the files Upload of the files Metadata submission Archival of the files Release of the study and datasets to EGA webpage For example, the upload of the files depends on the submission size, while metadata submission mainly relies on each submitter’s expertise. Further, some steps (e.g. answering to inquiries) depend on the EGA Helpdesk team, which may take some days to be processed during busy times Is data deposited in the EGA secure? The EGA set-up consists of a secure computing facility for data processing, a shared EBI set-up for data submissions and distribution of data via data requests made through the EGA website. Data is also copied in the Barcelona Supercomputing Center (BSC) infrastructure, where all stored and distributed data is encrypted Data is encrypted along the submission process and stored securely, granting its access to authorised users exclusively. During the download process, through our Python Client or Aspera, all requested data is downloaded over secure https connections. All data at the EGA is encrypted, and only accessible (for log-in and download) through secure protocols. For further information please, visit our security overview. What documentation do I need to provide? All submissions require policy’s documentation: 'Data Access Agreement (DAA)', 'Data Processing Agreement (DPA)' and 'Authorized Submitters Formulary'. The data processors (EGA) and the data owners will also sign the DPA. Will all metadata be public? Among the submitted metadata we need to make the distinction between identifiable and unidentifiable metadata: (1) the former may allow the identification of the human the sample derived from (e.g. detailed geographical providence, personal name, family ancestry…); (2) while the latter can be used to interpret the data without compromising the anonymity of the patients. The majority of the metadata submitted to the EGA corresponds to the unidentifiable category (e.g. sequencer's model). This type of metadata is publicly available on the EGA website and other EBI resources/partners’ websites. On the other hand, some parts samples’ metadata are subject to being identifiable, and thus only accessible by authorized data requesters, with the exception of: 5 submitter-defined attributes of the sample: alias, title, subject_id, gender and phenotype. It is the submitter’s responsibility not to submit sensitive metadata in these public fields. 3 anonymised fields that pinpoint the sample record in archivals: sample’s EGA stable ID (EGAN…), BioSample ID (SAMEA…) and submitter’s center name. During Submission Are there any sample specific requirements for EGA? All samples submitted to the EGA must include the attributes of biological sex, subject ID (anonymised individual identifier) and phenotype information. These are critical for data findability and its analysis, and we highly recommend using controlled ontology terms where applicable. For example: defining tumour and non-tumour samples and/or defining disease state. The EGA recommends using the Experimental Factor Ontology Database to find ontologized terms that describe your sample phenotypes. How do I get an accession number to use in my publication? You will receive your study accession number (EGAS…) upon complete your submission, either: Programmatically. As soon as the metadata is submitted and validated your study will be assigned an accession number that will be given in the submission’s response. Manually registering your study and relevant metadata using the online metadata submission tool: the EGA submitter Portal. How are files uploaded to the EGA? Data files are uploaded into private submission drop boxes (i.e. environments to which you are granted access and where you can transfer your files) using INBOX or FTP. These spaces are provided as part of the submission procedure. Before uploading any file, you must encrypt your files, . Only encrypted files shall be uploaded to the drop boxes. Why does data need to to encrypted for my submitted files? It is one of the security steps the EGA has implemented. In case of a security breach, people without the proper encryption key will not be able to read or use the information that could have been leaked. This measure is essential when working with sensitive data, such as controlled access human data. All submitters must use crypt4gh to create EGA compliant files prior to uploading them. This encryption is GPG-based, using EGA’s public key. Why are my files not available if I see them in the INBOX? There exists a time window between the data upload and the availability of such files via the Submitter Portal. For this reason, some metadata (run and analysis objects) cannot be registered until at least 24 hours after the files have been uploaded to your box. Why are MD5 sum values generated for my submitted files? We require pre- and post- encryption MD5 (message-digest) checksum values to be provided for all submitted files. These 128-bit values are computed using the content of each file, creating unique sequences that allow us to ensure that file integrity has been maintained during the transfer process. In other words, if the MD5 checksums we generate and those you generated match, we infer that the content of the transferred files is correct (i.e. files are not corrupted or truncated). MD5 checksums are computed automatically using the crypt4gh tool provided. Your submission will not be accepted and may be significantly delayed if you do not provide MD5 checksum values for all data files in the required format. How can I check if my files are correctly uploaded to the inbox? It is important to check the status pf your file so you know whether your files are in the inbox, being processed, or if there is any issue with one of them. In order to check this, you should: Look for the file locally. Drag and drop it to the file table. Then bars will appear on the table, which means that we are processing it. Green: The files checksum are correct and your file will move to “ingested files”. No further actions are needed from your end.. Red: The files checksum does not match and your file needs to be re-uploaded. Please re-upload relevant files to your inbox using the same path. After Submission How do I use my accession number in my publication? We suggest the use of the below template, using your study accession ID (EGAS…) : Data has been deposited at the European Genome-phenome Archive (EGA), which is hosted by the EBI and the CRG, under accession number EGASXXXXXXXXXXX. Further information about EGA can be found at https://ega-archive.org and "The European Genome-phenome Archive of human data consented for biomedical research" Your study ID will be the one that groups your whole submission, and thus its usage is recommended as such. Nevertheless, all metadata submitted to EGA hold a unique and persistent identifier (starting with EGA…) that can be used to identify specific records. For example, you could reference a specific dataset (EGAD…) or sample (EGAN…) in your publications (see full list of identifiers). How do I make my data searchable? Once you have finalized your submission, you can schedule the data release. Please take into account that the release process needs time for the files to be archived in our system, and for the Helpdesk team to validate your submission. Can I withdraw (meta)data from the EGA? We have methods in place for the secure removal of deposited (meta)data. Contact EGA-helpdesk for further details. EGA complies with FAIRness of (meta)data, and thus, even when the data is removed we keep an entry for their identifiers in our system. In other words, we execute a soft delete on canceled objects (e.g. a study): metadata is still stored in our systems, but it loses all links, cannot be queried and data files cannot be retrieved anymore. The reason behind this behaviour is so that queries using withdrawn data properly respond back (see example of a canceled study). What happens to the data once it has been submitted to the EGA? When the data is submitted, the submitter can choose either keep their data private or schedule the release of their data.

  Documentation submission/metadata/submission/FAQ

• How to request data

  Request Data Access If you're looking to access data from the EGA for your research, you are in the right documentation page! In this page you will find a step by step guide on how to request data archived at the EGA, as well as some frequently asked questions you might find useful. When requesting data, you'll need to provide information about your research project and intended use of the data. Keep in mind that your data access request may require additional approvals or agreements depending on the datasets and data providers involved. Step by step guide Register yourself as an EGA user. Validate your account. A validation link will be sent to your email to activate your EGA user account. Log into the EGA page. Search the dataset of interest from the dataset catalogue or search bar. Click on “Request access” Add a comment requesting these files and send your request Your request is successfully registered, and the DAC will receive a notification about your request In addition to submitting your request, you should also contact the DAC directly via e-mail. You can access the DAC's contact information from the relevant dataset page. Frequently Asked Questions (FAQ) Which is the role of the EGA in the data access process? The European Genome-phenome Archive (EGA) facilitates the secure distribution under controlled access of personally identifiable genetic and phenotypic data. Data Access Committee (DAC) is a body of one or more individuals who are responsible for data release to external requestors, based on participant consent and/or National Research Ethics terms. How do I request access to multiple datasets? To request access for multiple datasets managed by the same Data Access Committee (DAC), please start by visiting the DAC catalogue to locate the DAC of your choice. Once you've found the relevant DAC, proceed to its dedicated page where you'll find a "Request access" button. After logging in to the EGA website, you'll be presented with a comprehensive list of datasets under the chosen DAC. Select the datasets you're interested in, and then compose a message indicating your access request. Click the "Send" button to submit your request, which will include the chosen datasets. Please be sure to review the data usage policies for the requested datasets, as policies can vary among datasets managed by the same DAC. I am a co-applicant. Will I be given a joint access account? Each applicant needs to create an EGA account themselves, with unique login details. User log-in details are for individual use only and should never be shared, under any circumstances. EGA services are only provided to EGA account holders. Therefore, the co-applicant will send a formal request to the DAC. What happens if a co-applicant leaves or a new member needs to be added to an existing DAC application? The appropriate Data Access Committee (DAC) should be contacted and informed about the required changes so that the application can be updated. I have changed my place of work since my EGA account was created. Can I still have access to data? You must contact the relevant Data Access Committee (DAC). The DAC did not reply to my data access request. How should I proceed? There is no estimated time for DAC response. Please allow up to four weeks for a response. In the meantime, please send them a weekly reminder of the status of your request by emailing them directly.If the DAC becomes unresponsive, meaning that they fail to communicate with a requestor within the specified time frame, please contact the EGA Helpdesk team. I have an account with the EGA and would like access to further datasets. How should I proceed? You need to reapply to the relevant Data Access Committee (DAC). Once the DAC has approved your application your account will be updated and an email will be sent to notify you of a change made to your account. How do I download files of the datasets I have been granted access to? The preferred method for data download and decryption is the EGA Secure Download Client. Please carefully review the provided documentation. How do I download metadata? Metadata is retrieved from the EGA webpage; you will not need to use any download client. Be informed that you will only be able to download metadata of your approved datasets. For such download, you should first log in the EGA webpage with your credentials. Then browse the metadata's dataset you have gained access and you will find a metadata download button. You may also want to have a look our metadata schema. I have forgotten or misplaced my user account password; how do I get a new one? Click on “Log in”, located in the top right corner of the EGA homepage. Then click “Forgot password”, type in your registered institutional email address, and instructions for resetting your password will be sent to you. Please check both regular and junk/spam folders. I was sent a link to set a password for my download account, but it seems like the link has expired. What should I do? The procedure is the same as the one for a forgotten password, explained in the previous question.

  Documentation access/request-data/how-to-request-data

• Prevention and Early Treatment of Acute Lung Injury (PETAL) Crystalloid Liberal or Vasopressors Early Resuscitation in Sepsis (CLOVERS) (PETAL CLOVERS-BioLINCC)

  Data Access NOTE: Please refer to the "Authorized Access" section below for information about how access to the data from this accession differs from many other dbGaP accessions. Access to Biospecimens is through the NHLBI Biologic Specimen and Data Repository Information Coordinating Center (BioLINCC). Biospecimens from PETAL CLOVERS include plasma, and whole blood. Please note that use of biospecimens in genetic research is subject to a tiered consent. Available Data: The data available for request now include Long Term Outcome data.Objectives: To compare the effects of a restrictive fluid strategy (with early use of vasopressors) to a liberal fluid strategy in participants with sepsis-induced hypotension.Background: Intravenous fluid resuscitation is a common therapy used in the initial treatment of participants with septic shock and sepsis-induced hypotension. The goal of initial fluid therapy is to increase depleted or functionally reduced intravascular volume that occurs in sepsis due to a vasodilated vascular network. However, intravenous fluid resuscitation can create dilutional coagulopathy, fluid overload, and pathogenic edema in the lungs and other organs. Vasopressor agents are also commonly used to treat hypoperfusion by inducing constriction of arterioles and venules and increasing cardiac contractility. Vasopressor therapy also comes with risks that include vasoconstriction resulting in tissue ischemia, increased cardiac workload, and arrhythmias. Clinicians have used these strategies, typically in combination, to provide supportive care for participants with sepsis-induced hypoperfusion. However, at the time of the CLOVERS study, there was limited data to guide specific use of these therapies, including fluid volumes, in the early care of participants with sepsis-induced hypotension. The CLOVERS study hypothesized that a restrictive fluid strategy used during the first 24-hours of resuscitation for sepsis-induced hypotension would lead to lower mortality before discharge home by day 90 than a liberal fluid strategy.Participants: A total of 1,563 participants, from 60 medical centers, of the planned 2,230 participants were enrolled, with 782 assigned to the restrictive fluid group and 781 to the liberal fluid group. Enrollment in the trial was ended after the second interim analysis due to a lack of significant difference observed between the two 24-hour strategies.Design: This study was a multi-center, prospective, phase 3 randomized non-blinded interventional trial of fluid treatment strategies in the first 24 hours for participants with sepsis-induced hypotension. Participants were randomly assigned in a 1:1 ratio to either a restrictive fluid strategy (with early vasopressor use) or a liberal fluid strategy. In each group, the assigned protocol was followed for a period of 24 hours. The restrictive fluid protocol prioritized vasopressors as the primary treatment for sepsis-induced hypotension, with 'rescue fluids' being permitted for prespecified indications that suggested severe intravascular volume depletion. The liberal fluid protocol consisted of a recommended initial 2000-ml intravenous infusion of isotonic crystalloid, followed by fluid boluses administered on the basis of clinical triggers (e.g., tachycardia) with 'rescue vasopressors' permitted for prespecified indications. A protocol amendment implemented in October, 2019, allowed for limiting the initial infusion to 1,000 ml if the participant's blood pressure and heart rate had stabilized and the clinical assessment was that the participant was unlikely to benefit from additional intravenous fluid administration. The clinical team could override the protocol-specified care instructions at any time if it was judged to be in the best interest of the participant.The primary outcome was death from any cause before discharge home by day 90. Secondary outcomes included 28-day measures of the number of days free from ventilator use, days free from renal-replacement therapy, days free from vasopressor use, days out of the ICU, and days out of the hospital. Conclusions: Among participants with sepsis-induced hypotension, the restrictive fluid strategy that was used in this trial did not result in significantly lower (or higher) mortality, or other measures of recovery such as length of hospital stay, before discharge home by day 90 than the liberal fluid strategy.

  Study phs004080

• What is a DAC?

  What is a DAC? Given the complexity, scale, and diversity of global submitters and studies, the EGA operates a distributed data access model in which requests are made to the data controller, not to the EGA. The European Commission defines a data controller, in the General Data Protection Regulation (GDPR), as the person that determines the purposes for which and the means by which personal data is processed. A Data Access Committees, commonly referred to as DACs, comprise on or more individuals (or data controllers) that review data access requests and make decisions on who can access personally identifiable genetic, phenotypic, and clinical data deposited at the EGA. Therefore, the members of a DAC should be individuals who have the authority to approve data access requests. The animation describes how you can authorise access to your sensitive data with the help of Data Access Committee and Authorisation tool. Acknowledgement to CSC - IT Center for Finland, Elixir Finland, Elixir Europe. Frequently Asked Questions How can I create a Data Access Committee? How can I create a Data Access Committee? The members of a DAC can come from different areas of expertise, such as data management, data analysis, information technology, legal and compliance, subject matter experts, privacy and security, and representatives from the organisations or individuals that provide data to the DAC. The specific members of a DAC can vary depending on the needs of the organisation and the type of data being managed. The EGA strongly suggests checking with your organisation to align with its regulations How should a DAC be named? The chosen name must be informative to the applicant.  For example, internal identifiers, such as grant numbers, should not be used. Individual PI names should also not be used. DAC's are often named after the organisation or department of the data source.  Browse the full list of DAC names currently in the EGA. How can I become an EGA DAC contact? To register a DAC at the EGA you must create first as an EGA user. Once your EGA user has been approved by the Helpdesk team, you will be able to log in to the DAC Portal. How can I register a DAC? To register a DAC, follow the DAC Portal instructions.  You will be required to provide a DAC name, name of the individual(s) that make up your DAC and contact details for your DAC including your Institutional email(s). Wherever possible, the DAC should make sure that all points of contact are readily available and able to answer any initial data requests/queries in < 2 weeks.  Once your DAC is registered, you will have to wait upon the validation from our Helpdesk team. As soon as all the validations have been completed, your DAC will be activated. Alternatively, you can also establish a DAC at the EGA during a programmatic submission through Webin API. Which are the possible roles of a DAC contact? There are two possible roles for DAC contacts: member and admin. An admin has additional privileges compared to a member: An “admin” can manage data requests, create and edit policies, edit the content of the DAC, add or remove contacts, and decide the role of each contact. A “member” can manage data requests and create policies. However, a member does not have permission to modify DAC details, edit information from policies where they are not admins, or add/remove contacts. There is no limit to the number of admins in a DAC, and each admin is responsible for deciding who should have editing privileges. This allows for a more decentralised and democratic approach to managing the DAC. How can I modify the information of a DAC? To modify a DAC, follow the instructions here. Keep in mind that only DAC contact with an admin role can modify the information of a DAC. If your DAC was registered before the lauch of the DAC Portal, and its ID is EGAC0 (not EGAC5), you must use the programmatic submission to modify it. Please, do not hesitate to contact our Helpdesk team if you need help with this! To prevent potential data breaches and ensure adherence to GDPR regulations, it is essential that the European Genome-Phenome Archive (EGA) is informed via the Helpdesk team of any changes to the Data Access Committee (DAC). This should be done in addition to any changes being made on the DAC portal. Data Controllers (as per the definition in the DPA) are also responsible for notifying the previous DAC of any modifications. Without proper notification, changes might not be automatically updated in our system, leading to the risk of incorrect permissions being applied and potential data access issues. Therefore, it is imperative that all Data Controllers follow this protocol to maintain data integrity and security. What’s the link between DAC, policy and dataset? A dataset is linked to one single policy. At the same time, one policy has a one to one relationship with a DAC. In this example, you can see that in this dataset page, we are only showing the information of one DAC (1 dataset - 1 DAC). However, the ratio of objects does not work the same in the other direction. One DAC can own multiple policy objects. And each policy object can be reused in several datasets. Thus, one DAC can manage one or more datasets. In this example, you can see that in this DAC page, we are showing all the datasets that are managed by one DAC (1 DAC - >400 datasets). EGA Data Access Committee Best Practices Which are the EGA DAC best practices? Refer to DAC Best Practices What happens if a DAC member changes institutions? EGA is committed to the protection and ownership of the data stored in our systems. We respect the institution's ownership of the data, and as such, if a DAC member changes institutions, the ownership of the data will not be transferred to the new institution. Therefore, before changing institutions, we request that the DAC contact add a new member who will replace them once they no longer work at the institution. This ensures that the data remains protected and is accessible to authorised personnel at the institution. To prevent potential data breaches and ensure adherence to GDPR regulations, it is essential that the European Genome-Phenome Archive (EGA) is informed via the Helpdesk team of any changes to the Data Access Committee (DAC). This should be done in addition to any changes being made on the DAC portal. Data Controllers (as per the definition in the DPA) are also responsible for notifying the previous DAC of any modifications. Without proper notification, changes might not be automatically updated in our system, leading to the risk of incorrect permissions being applied and potential data access issues. Therefore, it is imperative that all Data Controllers follow this protocol to maintain data integrity and security. What happens if EGA detects an unresponsive DAC? EGA defines an unresponsive DAC as a DAC with one or more contacts who do not respond to data access requests. EGA has procedures in place to identify these types of DACs, escalate the issue, and attempt to reassign the DAC to a responsive contact. This is a crucial step in ensuring that data can be accessed and utilised by researchers. If EGA identifies an unresponsive DAC, the organisation will first try to resolve the issue by escalating it to the appropriate parties. This may involve attempting to reassign the DAC to a more responsive contact. Unfortunately, in situations where we cannot reassign the DAC, the dataset will be withdrawn from the public website and the files will be removed from our system. If an EGA ID is referenced in a publication, the EGA will take extra steps to ensure that the public is made aware of the data's unavailability. I don't want to receive an email notification for pending requests. How can I do that? If you are an EGA DAC with pending requests, you will always receive emails for new data access requests. However, the EGA understands that a request resolution can take some time, for this reason, if you add a comment (make sure you save it by clicking the APPLY button!) we will filter those requests at the time of sending the notification! How can I manage data access requests? What documentation does the DAC need to provide? Each dataset that is submitted to the EGA must be linked to a policy object. The policy is a Data Access Agreement (DAA), which defines the terms and conditions of using the dataset, such as how the data files should be stored once downloaded or details of publication embargoes that should be observed by the approved user. As part of the Data Access Agreement, information regarding the application can be captured to help inform the DAC when making its decision. For example, requestors could be asked to provide a proposed title for their research and a proposal of how the data will be used. By asking for provision of such information the DAC can be assured that the requestor fully understands any consents associated with the data. It is important that accounts created at the EGA, are created solely for those individuals that will be downloading the data from the EGA. As part of the data access request, we strongly encourage you to identify individuals that will need an account at the EGA in order to prevent sharing of login details, which is strictly prohibited under EGA user account policy. Such information can easily be captured in the DAA. NOTICE The data access agreement template below is provided for guidance only and should be adapted as you see fit to suit your own purpose. In the interest of promoting data sharing, we suggest that if an agreement cannot be met around clause 19 in this example that both parties should agree to remain silent, and that the clause should be removed from the agreement. Example DAA How can the DAC provide the DAA? The DAC should provide their own DAA when registering a policy. Data requestors will download this document and should fill it in and send it back to the DAC. Data access decisions should be based on such documentation. The DAA can be downloaded through the request data webpage. Once it has been filled in, the signed copy of the DAA can be uploaded back to the request data webpage and sent to the DAC for review. How can I grant access to the data? Once you receive a data access request, you can login to the DAC Portal. In this portal you will see all your pending requests and will be able to grant or decline access to the requestors. I am a member of the Data Access Committee. Could I approve somebody else to deal with the requests on my behalf? If you want to delegate data access decisions to someone else, make sure that the individual's account is officially registered as a member of the DAC. Remember that a DAC contact with an "admin" role can always add new members to an existing DAC, remove members, and modify contact details through the DAC Portal. Can I automatise the process of managing data access requests? The answer is yes! You can use a programmatic approach using our DAC API! Check out the DAC API specification! Data Breach What should a DAC do if they suspect a breach? If a DAC suspects a data breach of one or more of their datasets, they should immediately contact the EGA Helpdesk team at this link. The DAC must provide the following information when contacting the EGA Helpdesk team: A list of affected datasets An estimated date of the data breach (or interval of dates) A list of unauthorised users who accessed the data (if available). Otherwise, they can provide a list of authorised users for the affected datasets Any observations they would like to raise to the EGA team Once the DAC has contacted the EGA team, we will respond within 48 hours (please allow some leeway during peak times) and activate our data breach protocol. What can I expect from the EGA if they detect a breach? Once the EGA determines that a security incident has occurred, we will notify all DAC members that a data breach has been detected, and take steps to contain the incident. Containment approaches may include: Revoking a data provider's access to the EGA resources, such as by changing passwords. Removing affected EGA datasets from distribution, such as by withdrawing a dataset. Disabling certain functions or services, such as the EGA ingestion pipeline. Shutting down the system or disconnecting it from the network. After the incident has been contained, the EGA will determine whether it is necessary to eradicate components related to the incident. Finally, the EGA will enable recovery of the service to normal operation and confirm that all services are functioning normally.

  Documentation access/data-access-committee/what-is-dac

• Upcycling and merging data to challenge the dogma and identify new therapeutic targets for Glioblastoma

  Glioblastoma is the most common brain tumour. Characterised by a poor prognosis and its recurrence after multimodal treatments, the search for preventable risk factors has been mainly inconclusive up to date. Recently, the data merge from datasetsdeposited at the EGA allowed Aaron Diaz’s team to discover that the glioblastoma cells shift toward a mesenchymal phenotype when the tumour is recurring. Challenges in glioblastoma research As for virtually all cancer types, many efforts have been made to unveil the molecular features responsible of the disease, and several cellular pathways have indeed been identified as being frequently mutated in glioblastoma. Nonetheless, targeted therapies based on identified genes have so far failed to improve outcome, thus survival mostly relies on a standard treatment unchanged since 2005. This is a frustrating situation for both the scientific and medical communities, and above all for the patients, still facing a dreadful path. Some researchers hypothesised that this may be due to the inability to efficiently target cancer stem cells, the originators of the other cell types, thus inducing cancer relapse. In 2019 Charles P. Couturier and colleagues sequenced RNA from single cells of freshly excised glioblastomas of 16 patients, and demonstrated that glioblastoma cells replicate normal brain cell development with a conserved neural cancer cell hierarchy centered around glial progenitor-like cells. In this way, they helped identify the possible target cells to improve efficacy and durability of treatment. Data upcycling at the EGA: the glioblastoma case study Single cell RNA sequencing is generated with a laborious and expensive protocol. The quality of the starting material is crucial (cells sample freshly extracted from the patients) and often several attempts are needed before producing reliable quality sequencing results. Collecting big numbers of patients is also challenging. The sequencing data produced by Kevin Petrecca’s group in Montreal, Canada and deposited at the EGA (EGAS00001004422) was recently upcycled by Lin Wang in San Francisco, California and pooled with their freshly produced ones, and then deposited at the EGA as Dataset EGAS00001004909 The data merge allowed Aaron Diaz’s team to discover that the glioblastoma cells shift toward a mesenchymal phenotype when the tumour is recurring. They profiled 86 primary-recurrent patient-matched paired glioblastoma samples with single-nucleus RNA, among other techniques. These very comprehensive results lead the team to challenge the findings from several other cancer fields where chemotherapy standard chemo-radiation therapy selection pressure at the level of genomic alterations; this is indeed not the case for glioblastoma, where the pressure results in phenotypic transition between cellular states. Several technical controls were made to ensure that the merge of the data was not introducing a bias in the results, and an Inter-table analysis demonstrated nearly equal contribution to overall variance from each of the studies included, indicating that the findings were not due to inter-laboratory technical effect. A novel principal-component analysis showed that the largest contribution to variation in primary glioblastoma neoplastic cells was an axis between MES (mesenchymal) and proneural expression programs. In summary, treating glioblastoma often makes a MES, as commented by Lucy Stead about this remarkable work. Check Aaron Diaz’s team Nature Cancer paper, with strong technical tools, state of the art analysis and data from different sources converging to the same outcomes that made possible a significant step toward a better handling of a frightful cancer. References Couturier, C.P., Ayyadhury, S., Le, P.U. et al. Single-cell RNA-seq reveals that glioblastoma recapitulates a normal neurodevelopmental hierarchy. Nat Commun 11, 3406 (2020). Stead, L.F. Treating glioblastoma often makes a MES. Nat Cancer 3, 1446–1448 (2022). Wang, L., Jung, J., Babikir, H. et al. A single-cell atlas of glioblastoma evolution under therapy reveals cell-intrinsic and cell-extrinsic therapeutic targets. Nat Cancer 3, 1534–1552 (2022). Related links: Kevin Petrecca’s group dataset deposited at the EGA: EGAS00001004422 Lin Wang dataset deposited at the EGA: EGAS00001004909

  Blog upcycling-and-merging-data-to-challenge-glioblastoma

• Drug development for pediatric cancers: the importance of patient' s genomic data re-use

  Cancer in children is uncommon and the overall prognosis for most pediatric cancers is good. However, while the combined survival rates have improved over the last decades, certain childhood malignancies, such as high-grade gliomas or metastatic sarcomas, still remain incurable in most patients. New strategies for targeting those devastating diseases are imperative, and patient genomic data can become a key asset in the process [1]. The Pediatric Cancer Genome Project’s datasets At EGA, we store over 500 datasets with sequencing data from pediatric cancer patients. A remarkable case is the datasets belonging to the Pediatric Cancer Genome Project (PCGP) from St. Jude Children’s Research Hospital–Washington University (Table 1 - EGAS list). PCGP is an ambitious effort to identify the mutations that drive childhood cancer and find new cures. Those datasets include 600 patients with complete tumor and normal genomes from 15 different tumor types. PCGP datasets have been an important resource for various studies that pooled genomic data from different public and in-house datasets to perform extensive genomic characterizations and publish comprehensive pan-cancer pediatric studies [2],[3]. Other interesting pediatric cancer datasets are from the Pediatric Brain Tumor Consortium, Sickkids or ICGC PedBrain project. How data reuse impacts drug development for pediatric cancers Recently, in October 2024, Nature Communications published a work led by the University of Michigan where authors used data from EGA (PCGP) check the table below as part of their strategy to pursue the identification of new tumor vulnerabilities susceptible to becoming novel therapeutic targets in diffuse midline glioma. Diffuse midline gliomas (DMG) are treatment-resistant and uniformly fatal pediatric brain tumors. The prognosis of this brainstem tumor is dismal with a median overall survival of 9–12 months from diagnosis. In this study, the authors first developed a lab model of the disease and reanalyzed data from the EGA to identify genes potentially linked to tumor severity. This approach revealed involvement of specific metabolic pathways, suggesting new possibilities for therapeutic intervention. In mice, the study shows that the use of statins can improve survival. For a brief overview of the underlying science, diffuse midline gliomas present intratumor heterogeneity with subpopulations of less-differentiated oligodendrocyte precursors and more differentiated astrocytes. Authors established in vitro models to recapitulate both phenotypes and identify metabolic programs in both subpopulations. To determine the clinical relevance, the authors re-used gene expression data from 76 DMG patients identifying a gene signature predicting decreased overall survival. After extensive metabolic characterization of subpopulations, authors defined strategies to target specific metabolic vulnerabilities. Pre-clinical experiments in mice using OXPHOS inhibitors and statins showed a reduction in tumor burden and increased overall survival [4]. In this scenario, the re-use of high-quality patient’s sequencing data appeared as an advantageous strategy to support the clinical relevance of in-vitro and pre-clinical findings. On the other hand, in rare conditions such as childhood cancer, the availability of public datasets and the possibility of pooling data from different sources can be the only way to obtain impactful results that lead to improvements for patients. References Davidoff, A. M. Pediatric Oncology. Seminars in pediatric surgery 19, 225–233 (2010). Gröbner, S. N. et al. The landscape of genomic alterations across childhood cancers. Nature 555, 321–327 (2018). Venu Thatikonda et al. Comprehensive analysis of mutational signatures reveals distinct patterns and molecular processes across 27 pediatric cancers. Nature Cancer 4, 276–289 (2023). Mbah, N. E. et al. Therapeutic targeting of differentiation-state dependent metabolic vulnerabilities in diffuse midline glioma. Nature Communications 15, (2024). Datasets and Studies ID Title Access Policy Year EGAD00001000134 Driver mutations in histone H3.3 and chromatin remodelling genes in paediatric glioblastoma McGill-DKFZ Pediatric Brain Tumour Consortium 2016 EGAS0000100192 Somatic Histone H3 Mutations in Diffuse Intrinsic Pontine Gliomas and Non-Brainstem Paediatric Glioblastomas St. Jude Children's Research Hospital - Washington University Pediatric Cancer Genome Project 2017 EGAS00001000575 Whole genome sequencing and whole exome sequencing of DIPG tumors and matched normal tissue The hospital for sick children ("SickKids") 2016 EGAD00001000792 Exome sequencing reads of paediatric glioblastoma McGill-DKFZ Pediatric Brain Tumour Consortium 2016 EGAD00001002006 Whole genome sequencing of paediatric glioblastoma in the ICGC PedBrain project ICGC PedBrain project 2016

  Blog drug-development-for-pediatric-cancers

• National Cancer Institute (NCI) Biospecimen Pre-analytical Variables (BPV) Analysis

  The Biospecimen Pre-analytical Variables (BPV) Program is a National Cancer Institute-sponsored study to systematically assess the effects of pre-analytical factors on the molecular profile of biospecimens. A robust biospecimen collection infrastructure was established to prospectively collect biospecimens using rigorous standard operating procedures to control for most variables while introducing experimental conditions to study specific biospecimen handling issues, including the cold ischemic time (delay to formalin fixation), time in formalin, freezing methods, and storage temperatures and durations. RNA and DNA from biospecimens collected under these conditions was analyzed on multiple molecular platforms. The potential effects of these pre-analytical conditions on protein integrity and detection of metabolites were also examined. Data from this study will be used to develop evidence-based biospecimen standard operating procedures and best practices for fit-for-purpose collection, processing, and storage of biospecimens. The BPV Cohort is utilized in the following dbGaP substudies. To view genotypes, analysis, expression data, other molecular data, and derived variables collected in these substudies, please click on the following sub-studies below or in the &#34;Substudies&#34; box located on the right hand side of this top-level study page phs001304 BPV Cohort. The substudy links will be active once they are released by dbGaP. Preanalytical Impacts on Global Metabolite Profiling - plasma (MassSpec by Metabolon) This study was to evaluate the impact of the storage temperature (s) (-80&#176;C and LN2 vapor) and the length of storage on human plasma quality using LC-MS/MS (liquid-chromatography-mass spectrometry/mass spectrometry) based global metabolite profiling. The study includes 240 plasma samples collected from 40 donors. Investigate the effect of the delay to fixation on the proteome and phosphoproteome -FFPE (MassSpec by Caprion). The study is to do proteome and phosphoproteome analysis on Delay to fixation was carried out using FFPE tumor samples from colon and ovarian cancer patients comparing 2, 3, and 12hr delay to fixation to the 1hr time point. The study includes 100 samples 20 donors. Investigate the effect of storage conditions of tumor specimens on the proteome and phosphoproteome profiling- Frozen tissue and plasma (MassSpec by Caprion). The study was to evaluate the effects of storage conditions on tumor specimens. Plasma samples from 40 cancer patients stored at two different temperatures (-80&#176;C and LN2) for a given period (0-2, 6-8, and 12-14 months) were evaluated. Frozen kidney tumor samples from 20 patients were compared for effects of different snap frozen (dry ice vs. LN2) and storage temperatures (-80&#176;C and LN2). The study includes 100 tissue and 240 plasma samples from 60 donors. Preanalytical Impacts on Genomic Sequencing by Next Generation Sequencing (NGS) technology (mRNA/miRNA and WES by Expression Analysis). The goal of the study is to determine the effects of cold ischemic delay-to-fixation (4 time points) and formalin preservation (FFPE) on the nature and quality of genomic profiles using the matched freshly frozen sample as the gold standard, which including WES, RNAseq. The study includes 395 samples from 37 donors. Preanalytical Impacts on Copy Number Variation (CNV) Detection by aCGH technology (aCGH by Georgetown University). This study was to use aCGH to evaluate the effect of variation in cold ischemia time and time in formalin fixation on CNV in DNA extracted from kidney cancer specimens. The study includes 235 samples from 40 donors. Evaluation of frozen conditions on mRNA profiling by TaqMan assay (mRNA expression by Georgetown University). This study was to utilize gene expression profiling, using custom TaqMan arrays, to compare the molecular profiles of RNA from frozen tumor samples collected using two freezing methods (dry ice or LN2), two storage temperatures (-80&#176;C or LN2 vapor), as well as Optimal Cutting Temperature (OCT) compound and non-OCT embedded. The study includes 100 samples from 20 donors. mRNA signature for stratification by cold ischemia time (mRNA expression by IBBL). The study was to determine the effects of cold ischemic time (delay-to-fixation) and formalin preservation (FFPE) on mRNA detection by Taqman assay using tumor tissue specimens from kidney, colon and ovarian cancer patients. There are160 samples from 40 donors. The Biospecimen PV cohort is utilized in the following dbGaP individual studies. To view molecular data, and derived variables collected in these individual studies, please click on the following individual studies below or in the "Sub-studies" box located on the right hand side of this top-level study page phs001304 Biospecimen PV cohort. phs001634 CIT mRNA phs001635 CNV aCGH phs001636 Fixation Delay phs001637 Global Metabolite Profiling phs001638 mRNA TaqMan phs001639 NGS phs001640 Tumor Storage

  Study phs001304