12528 results for ""non-traditional+communal+storytelling+approach"+novel+segment+noted+in+critical+commentary"

in 15.96 milliseconds.

• MATISSE WES and bulk RNA-sequencing data

  High-risk cutaneous squamous cell carcinoma is frequently seen in frail, elderly patients and often requires mutilating surgical treatment and adjuvant radiotherapy (RT). The MATISSE trial (NCT04620200) was conducted to improve clinical prospects in CSCC patients eligible for extensive curative surgery, and evaluated early treatment response and immune dynamics following ultra-short neoadjuvant immunotherapy prior to standard of care surgery with or without radiotherapy. Fifty patients were randomized to receive two courses of nivolumab 3 mg/kg (NIVO, weeks 0&2) or nivolumab 3 mg/kg (weeks 0&2) and one course of ipilimumab 1 mg/kg (week 0 only, NIVO/IPI before surgery at week 4, with the primary objective being histopathological response based on residual viable tumor cells in the surgical specimen. Ten patients choose not to undergo surgery, of whom nine reached a clinical complete response during follow up, and were disease-free at median 34 months follow up. Serial tumor and blood samples at baseline, week 1, week 2 and week 4, enabled to investigate dynamical changes through bulk WES and RNA sequencing to potentially aid future de-escalation trials.

  Study EGAS50000001003

• scRNA-seq of HSPC treated with gemcitabine and carbplatin

  The study used cryopreserved hematopoietic stem and progenitor cells (HSPCs) harvested from one patient with chronic myelogenous leukemia (CML). The cells were thawed and acclimatized for 48 hours in StemMACS HSC Expansion Media XF (Miltenyi Biotec) supplemented with StemMACS HSC Expansion Cocktail (Miltenyi Biotec) at 37°C in a humidified atmosphere containing 5% CO2. 4 samples of 2000000 HSPCs in 2 ml media each were then prepared and treated for 24 hours: carboplatin-high: 150 µg/ml carboplatin carboplatin-low: 18.75 µg/ml carboplatin gemcitabine: 25 ng/ml gemcitabine control: no drug Single-cells were subsequently extracted using the ddSEQ™ Single-Cell Isolator (Bio-Rad) and later sequenced using the SureCell™ Whole Transcriptome Analysis 3' Library Prep Kit (Illumina) on the NextSeq 500 System (Illumina) using the NextSeq 500/550 High Output Kit v2.5 150 Cycles (Illumina) all following the manufacturer's instructions. FASTQ-files were then processed following the ddSeeker (Romagnoli, D., et al., BMC Genomics 2018, doi:10.1186/s12864-018-5249-x) and Drop-seq (Macosko, E.Z., et al., Cell 2015, doi:10.1016/j.cell.2015.05.002) protocols for processing scRNA-seq data to yield the final digital gene expression for each cell.

  Study EGAS00001004381

• Transcriptomes of human CD4+ T lymphocytes - Metabolic project

  Human CD4+ T cells are essential mediators of immune responses. By altering the mitochondrial and metabolic states, we defined metabolic requirements of human CD4+ T cells for in vitro activation, expansion, and effector function. T cell activation and proliferation were reduced by inhibiting oxidative phosphorylation, while early cytokine production was maintained by either OXPHOS or glycolytic activity. Glucose deprivation in the presence of mild mitochondrial stress markedly reduced all three T cell functions, contrasting the exposure to resveratrol, an antioxidant and sirtuin-1 activator, which specifically inhibited cytokine production and T cell proliferation, but not T cell activation. Conditions that inhibited T cell activation were associated with the downregulation of 2′,5′-oligoadenylate synthetase genes via interferon response pathways. Our findings indicate that T cell function is grossly impaired by stressors combined with nutrient deprivation, suggesting that correcting nutrient availability, metabolic stress and/or the function of T cells in these conditions will improve the efficacy of T cell-based therapies.

  Study EGAS00001005565

• Whole genome and transcriptome analysis of medullary thyroid cancer

  Medullary thyroid cancer is the neoplasm of the calcitonin-producing parafollicular cells of the thyroid gland. The hormone calcitonin acts to lower the blood calcium level, counteracting the effects of the parathyroid hormone; it can also serve as a biomarker for the presence or recurrence of medullary thyroid cancer. Surgery is the only curative treatment for this cancer. Targeted therapeutics vandetanib and cabozantinib are approved for the treatment of aggressive and metastatic tumors that are not amenable to surgery. The use of these multikinase inhibitors are supported by the observed overactivation of the RET oncoprotein in a large sub-population of medullary thyroid cancers; however, not all patients carry oncogenic alterations of this kinase. Hence, there is a need for molecular characterization of medullary tumors on the genomic scale with the aim of identifying targetable mutations. Here, we describe the genomic profiles of two medullary thyroid cancers and report the presence of a putative oncogenic BRAF fusion in one. Such alterations previously observed in other malignancies and known targets of available drugs, can benefit patients who currently have no therapy options.

  Study EGAS00001001473

• Clonal evolution in myeloma: the impact of maintenance lenalidomide and depth of response on the genetics and sub-clonal structure of relapsed disease in uniformly treated newly diagnosed patients

  The emergence of treatment resistant sub-clones is a key feature of relapse in multiple myeloma. Therapeutic attempts to extend remission and prevent relapse include the maximisation of response and use of maintenance therapy. We used whole exome sequencing to study the genetics of paired presentation and relapse samples from 56 newly diagnosed patients, following induction therapy, randomised to receive either lenalidomide maintenance or observation as part of the Myeloma XI trial. Patients included were considered high risk, relapsing within 30 months of maintenance randomisation. Patients achieving a complete response had predominantly branching evolutionary patterns leading to relapse, characterised by a greater mutational burden, an altered mutational profile, bi-allelic inactivation of tumour suppressor genes, and acquired structural aberrations. Conversely, in patients achieving a partial response the evolutionary features were predominantly stable with a similar mutational and structural profile. There were no significant differences between patients relapsing after maintenance lenalidomide vs observation. This study shows that the depth of response is a key determinant of the evolutionary patterns seen at relapse.

  Study EGAS00001003539

• Whole genome sequence and RNA-seq data from paired tumour and germline samples from mesothelioma patients.

  Malignant pleural mesothelioma (MPM) has a poor overall survival with few treatment options. Whole genome sequencing (WGS) combined with RNA sequencing (RNA-seq) analysis of the immune features of MPM offers the prospect of identifying changes that could inform future clinical trials. We analysed somatic mutation and RNA-seq data from 229 MPM samples, including 58 MPM samples that had undergone WGS from our own institutions, together with other published data. This combined analysis identified somatic driver genes, including newly identified candidate genes. Whole genome doubling was a frequent event that correlated with shorter survival. Mutational signature analysis revealed dominant signatures and showed that defects in homologous recombination repair were infrequent in our cohort. Within the tumour immune environment we identified high M2 macrophage infiltrate linked with MMP2, MMP14, TGFB1 and CCL2 expression, representing an immunosuppressive environment. A small subset of samples had a higher proportion of CD8 T cells and a high cytolytic score, suggesting a ‘hot’ immune environment which is independent of the somatic mutations. We propose that our findings on genomic changes and subtypes of immune microenvironments may influence therapeutic planning in the future.

  Study EGAS00001005196

• Kidney_transplant_nephrectomy_scRNAseq

  Single cell transcriptomics study of tissue from human kidney transplant nephrectomies Tissue is acquired from kidney transplant nephrectomies, homogenised and disaggregated to a single cell suspension prior to droplet encapsulation single cell RNAseq (10X protocol) or plate based single cell RNAseq (SS2 protocol). Human tissues, including the kidney are seeded with a tissue resident immune cell network throughout life. These cells may self renew in situ or be replaced by circulating precursors which enter the tissue in response to tissue specific niche and inflammatory signals. We are using single cell RNA sequencing of kidney transplant nephrectomy tissue to 1) understand the immune cell populations which are resident within the human kidney 2) identify which of these populations is donor or recipient derived. 3) Uncover the temporal dynamics of donor/recipient chimerism in the the human kidney following transplantation. 4) Understand transcriptional differences between organs removed for a variety of reasons (infection, chronic rejection, vascular emergencies) This data is part of a pre-publication release. For information on the proper use of pre-publication data shared by the Wellcome Trust Sanger Institute (including details of any publication moratoria), please see http://www.sanger.ac.uk/datasharing/

  Study EGAS00001003935

• BARIA baseline first 100 individuals transcriptomes

  Prevalence of obesity and associated diseases, including type 2 diabetes mellitus, dyslipidaemia and non-alcoholic fatty liver disease (NAFLD), are increasing. Underlying mechanisms, especially in humans, are unclear. Bariatric surgery provides the unique opportunity to obtain biopsies and portal vein blood-samples. Methods The BARIA Study aims to assess how microbiota and their metabolites affect transcription in key tissues and clinical outcome in obese subjects and how baseline anthropometric and metabolic characteristics determine weight loss and glucose homeostasis after bariatric surgery. We phenotype patients undergoing bariatric surgery (predominantly laparoscopic Roux-en-Y gastric bypass), before weight loss, with biometrics, dietary and psychological questionnaires, mixed meal test (MMT) and collect fecal-samples and intra-operative biopsies from liver, adipose tissues and jejunum. We aim to include 1500 patients. A subset (approximately 25%) will undergo intra-operative portal vein blood-sampling. Fecal-samples are analyzed with shotgun metagenomics and targeted metabolomics, fasted and postprandial plasma-samples are subjected to metabolomics, and RNA is extracted from the tissues for RNAseq-analyses. Data will be integrated using state-of-the-art neuronal networks and metabolic modeling. Patient follow-up will be ten years.

  Study EGAS00001005704

• Targeted sequencing of diffuse large B-cell lymphoma tumour samples from the UK's Haematological Malignancy Research Network

  The UK’s Haematological Malignancy Research Network (www.HMRN.org) was established in 2004 to provide robust generalizable data to inform clinical practice and research. HMRN is a collaboration between researchers in the Epidemiology & Statistics Group (ECSG) at the University of York, a unified Clinical Network operating across 14 hospitals, and an integrated Haematological Malignancy Diagnostic Service (HMDS) in Leeds. Covering a population of around 4 million, HMRN collects detailed information about all patients diagnosed with a haematological malignancy within the HMRN region, accruing around 2,400 new diagnoses each year. The population has a similar socio-demographic profile to the country as a whole, and HMRN’s maturing data present an increasingly valuable resource to address real questions of concern to haematologists, commissioners and health service researchers – locally, nationally and internationally. This study forms part of a larger project employing targeted exome sequencing on tumour samples from patients diagnosed with a variety of both lymphoid and myeloid malignancies. The results for samples collected from 928 diffuse large B-cell lymphoma patients, diagnosed within HMRN from 2005 to 2012, are provided.

  Study EGAS00001005953

• All you need to know about our new DAC Portal

  With the DAC Portal, it is possible to streamline the process of managing access to sensitive data, ensuring that researchers have the necessary resources to advance scientific discovery while maintaining the highest standards of data protection and privacy. We know that, as a new tool, its first use can be complex. For this reason, in this article we will try to show all the elements of interest. Enjoy! Credentials: who needs to create a new user to access the DAC Portal and who doesn't? Only new users (since September the 12th) need to create an EGA account to access the DAC Portal. The EGA team went one step ahead by creating EGA accounts for former DAC members to login to the DAC Portal. These accounts are linked to the personal email used in the DAC structure: To check the linked email, DAC members can paste the DAC ID right after this link: https://metadata.ega-archive.org/dacs/ (e.g. https://metadata.ega-archive.org/dacs/EGAC00001002543) In case of password oblivion, it is possible to set a new one. All the process is channelled through the personal email. Some DAC members may be interested in updating the DAC email. This action can be done contacting our Helpdesk team. For the correct functioning of the DAC Portal, users must add the missing information of the DAC Profile. For a deeper dive, check out our documentation. The first step: knowing your workspace on the Portal Once logged in to the platform using the EGA User credentials, note the sections available: DACs and Policies. In the first one it is possible to check all user's registered DACs by default. It provides a comprehensive overview of each DAC, including its EGA accessions (EGAC), title, status, and the number of data access requests associated with each DAC. Whereas the Policies section is where users can manage and view all their registered policies, along with their associated EGA accessions, links, and titles. A drop-down menu is available with shortcuts to the most useful pages in the top right corner. It is possible to check DACs and policies, as well as creating new ones. In this menu, users can also contact the Helpdesk team using the “Need Help?” section to make inquiries about DACs and policies. Comprehending the DACs list & making the most of all the features Colours are crucial in the DAC's section as they will indicate the user role and the status in every committee, namely: Yellow: you are the administrator of the DAC and have full control to add other contacts, modify the content, and manage data access requests. Orange: you are a member of the DAC and have the authority to manage data access requests but cannot make any changes to the content. Blue: you have been invited to join the DAC and need to either accept or decline the invitation. Grey: the DAC is currently pending validation by the EGA Helpdesk team. Red: the DAC has been declined by the EGA Helpdesk team. Discover more information on how to view the message from Helpdesk containing the declination reason or how to validate or reject a DAC invitation by taking the tour of the DAC Portal. How to create, register and edit a DAC Creating a DAC is an easy process that only requires users to complete the necessary information. After that, the EGA Helpdesk team will review the proposal and validate the proposal. Once the DAC is validated it is possible for authorised users with admin role to edit it at any time, ensuring that all information and contacts associated with the committee is accurate and up to date. Membership management is controlled by searching for the EGA user looking for their username, email, or organisation. Please, note that for a person's details to appear in this search engine, they must have registered as a EGA user. Data Access Committee administrators manage two types of permissions that apply to contacts: Main contact and Role. Both can be modified at any time: Main contact refers to the primary person we firstly contact for any inquiry about the DAC (please, note that we can contact all DAC members, and this refers to the person we will contact first). Role defines the actions that can be taken by each contact. There are two possible status, admin and member, details of which can be found in the Take the Tour. Keep in mind that, to save the modifications, it is always necessary to click on “Update”. Moreover, it is also possible to delete any contact in a DAC whenever it is needed. The data request process: how to manage access requests The data request process is now channelled through the EGA website. Once a user sends a request access, the petition will go directly to the DAC Portal profile of the DAC members liked to the requested dataset. Whenever a request is received, a sand clock symbol will be displayed next to the DAC responsible for the dataset involved. By clicking on the DAC, it is possible to discover more information about requester(s). In this section, DAC Portal users will also be able to modify the display of the data access requests. It is possible to group requests by dataset accession or username, depending on the user preferences. Additionally, it is possible to isolate specific requests by user or dataset. To accept a request, users must slide the button to the right. Once the button turns green, it signifies that the request is accepted; the requester will be granted access to the requested dataset. To make lives easier, we have implemented a “Select all” button to easily accept or revoke multiple requests at once. To decline requests, it is necessary to slide the button to the left. A red button means the requester will not be granted access to the dataset. The DAC Portal will always ask to submit the reason why the data access was denied. Please, note that any decision, grant or denial, must be confirmed clicking the "Apply" button. This will update the status of the request and notify the requester accordingly. Taking control of the activity in the DAC Portal: checking the requests history The History button is a useful feature that allows users to access a list of all the requests that have been granted. This is especially useful for auditing purposes, as it enables to keep track of who has been granted access to the data and when. To facilitate control for those users with several requests we have included a filtering option. It allows to filter requests by user, mail, dataset, EGA ID, and date (these are combinable to boost the search). Don't forget about policies: creation, management, and update Similarly to the DACs section, in the Policies one users can manage and view all their registered policies. By clicking on any policy, it is possible to view its details as well as making any necessary updates or modifications. The sheets symbol and its adjacent number indicate the quantity of objects using a policy. By clicking in the location symbol users will go directly to the DAC page on the DAC Portal to see more information about that DAC. DAC Portal users can create new policies. The first step requires to link the policy to a registered DAC. After defining the title, users can either add a link to an external URL containing terms & conditions or write the policy content directly on the DAC Portal. Keep in mind that both options can be included. Data Use Ontology (DUO) codes can be added to new policies. These codes are used to specify the permitted and prohibited uses of the data. Please, note that some of them require a modifier to provide additional specificity. Find out more by checking out this specific content on the DAC Portal Tour. Policies can be modified at any given time by clicking on one registered policy, which will display the current information.

  Blog new-dac-portal