11995 results for "coins fc Visit Buyfc26coins.com for latest FC 26 coins news..yU53"

in 29.06 milliseconds.

• Duplexseq of the interstrand crosslinks_WGS

  One of the most dangerous forms of DNA damage are interstrand crosslinks (ICLs), which covalently crosslink the two strands of the DNA double helix. The repair of these lesions is crucial for cellular survival due to their ability to block transcription and DNA replication. Initially, the major pathway that has been described in ICL repair involves a network of 22 genes that are mutated in a severe human genetic disease known as Fanconi Anemia (FA). Using synthetic lethality screens in the near-haploid human HAP1 cell line, we recently identified two potentially novel regulators of ICL repair, C1orf112 and THAP12. Loss of C1orf112 and THAP12 causes hypersensitivity to ICL-inducing DNA damaging agents, such as Mitomycin C (MMC). Additionally, C1orf112-depleted cells show elevated levels of micronuclei and accumulation of DNA damage in S-phase. To better understand how C1orf112 and THAP12 mediate the repair of ICLs, we want to perform mutational signature analysis, using the BotSeq method. Therefore, WT, C1orf112 and THAP12 knockout cells were cultured in vehicle or MMC treated conditions for 10 days and the genomic DNA was isolated. FANCA and FANCD2 knockout cells are taken along as controls in this experimental setting. . This dataset contains all the data available for this study on 2023-04-20.

  Dataset EGAD00001010298

• TB-DAR Whole Genome Sequencing Study

  116 Whole Genome Sequencing (WGS) samples from the TB-DAR study, based on a cohort of adult pulmonary tuberculosis patients recruited in Dar es Salaam, Tanzania. WGS was performed at the Health2030 Genome Center in Geneva on the Illumina NovaSeq 6000 instrument (Illumina Inc, San Diego CA, USA), starting from1μg of whole blood genomic DNA and using Illumina TruSeq DNA PCR-Free reagents for library preparation and the 150nt paired-end sequencing configuration. Average coverage was above 30X for 75 samples, between 10X and 30Xfor 40 samples, and approximately 8X for a single sample. Sequencing reads were aligned to the GRCh38 (GCA_000001405.15) reference genome using bwa (Version 0.7.17).

  Dataset EGAD00001008400

• MethylScan data of plasma samples

  10ng from each cfDNA sample was used as the input material. For gDNA samples, 1.5-2ug each was first sonicated by Covaris R230 system (Woburn, MA). Next, size-selection with 0.8x-1.5x two-step Ampure XP beads was performed to enrich the 150-200bp fragments. 200ng of the size-selected gDNA was used as input material. The pre-capture library construction was performed with NEB UltraII DNA library prep kit for Illumina (Ipswich, MA) and the adapter was the methylated EM-seq adapter. Before the first PCR amplification, the gDNA samples were subjected to bisulfite conversion by QIAGEN Epitect kit, and cfDNA samples were subjected to enzymatic conversion by NEBNext enzymatic methyl-seq kit if the hybrid capture panel designed for converted DNA was used downstream. Twist panel hybrid capture was performed with their standard protocol (Twist Bioscience, South San Francisco, CA). The concentration of the post-capture library after the second PCR amplification was measured by Qubit 1xdsDNA HS kit (ThermoFisher, Waltham, MA). Their quality was examined by TBE-UREA PAGE and Bioanalyzer before sequencing. Libraries were then sequenced with 150bp paired-end reads on Illumina machines by Genewiz, Inc. (South Plainfield, NJ, USA). This dataset contains MethylScan data of the plasma samples from 248 noncancer individuals and 27 cancer patients (17 liver and 10 GI-tract cancers).

  Dataset EGAD00001015815

• Submitter Portal

  Submitter Portal The Submitter Portal does not support array submissions! Please refer to the array documentationAny new objects registered in the Submitter Portal will not be available for use in an array submission For further information please check our Submission FAQs, submission quickguide as well as submission terms! The metadata submission process can be difficult and time-consuming. For this reason, the EGA has developed the Submitter Portal, a tool that was created to offer a simplified and user-friendly method of registering metadata. Our portal provides features that are intended to make the input of metadata easier, ensuring that your data is registered correctly and effectively. Our page is divided into logical sections and includes a helpful video instruction to further assist you as you complete the submission process. With the Submitter Portal, you can rest assured that the submission of your data is in good hands. Submitter Portal Index Previous steps Access to Submitter Portal Start a Submission Take The Tour Tutorial Previous steps Create your EGA account To submit data, you first need to create your EGA user. Then, once your account has been verified by the Help Desk team, you will be able to request a submitter role and send the EGA Data Processing Agreement (DPA). In the case you already have an EGA account, or an ega-box (submission account), you can skip this step. Upload your files Please note that all your files must be encrypted using the Crypt4GH tool before upload them.As soon as you are assigned with a submitter role and added your public key to your profile, you will be able to connect to the EGA inbox and upload your files. Understand the EGA metadata schema It's crucial to comprehend the EGA metadata schema, a set of rules that specify how data is organised, described, and shared inside the EGA, in order to get the most out of this resource. Learn all about EGA metadata schema! Register your DAC and policy There are two objects in the EGA metadata schema that are registered in a separate portal. All DACs and policy objects are registered using the DAC Portal, a tool developed by EGA to help data controllers manage their data stored at the EGA. You can find relevant information in the DAC Portal Guide. Access to Submitter Portal 1. Request Submitter Role Once you have created your EGA user, request a Submitter Role and complete relevant information such as submission type and size. 2. Signature of the Data Processing Agreement The Data Processing Agreement (DPA) signed by CRG and EMBL-EBI (Joint Data Processors for the EGA) can be downloaded to the submitter for its signature. Further information related to the DPA can be in the Privacy Notice section. The DPA should be signed by a legal representative of the submitter with power of attorney/appointment duly authorised to sign contracts on behalf of the institution. The submitter will return a fully-executed copy of the DPA to us. Please note that due to the high volume of submissions to EGA the DPA is non-negotiable. Once you have completed all the information and attached the DPA signed, send your Submitter request and the EGA Helpdesk Team will validate it and send a confirmation to start submitting your metadata. Start a Submission The steps below will show you how to start a submission and are accompanied with a tutorial and the Take the tour of Submitter Portal. 1. Login Go to the Submitter Portal interface and log in using your EGA account credentials. 2. Create a submission The Submitter Portal interface will show you any already existing open submission. To start a new submission click on “Create a Submission”.In this phase you have the option to add any collaborator(s) as well as their permissions (“Read only” or “Read & Write”). If you want to invite all the collaborators from a previous submission, you can add them by selecting said submission.In the event that the submission has been closed, you will need to reopen it. To do this, you will need to modify one of the objects in the submission, for example, copy and paste the title. Once the submission is open, you can add a collaborator. Further information can be found in the Submission Tour 3. Create Study Click on add Study and complete the form with the relevant information. The fields with an asterisk (*) are mandatory. Further information can be found in the Submission Tour4. Create Sample Sample registration can be done either individually or in batch by using a template. Batch upload: download the template and complete it with information about the sequencing samples. Upload the samples.csv and the sample will be created.Add single sample: complete the mandatory fields with the metadata information of your sample.  Further information can be found in the Submission Tour5. Create Experiment Register an experiment with ​information about the sequencing methods, protocols and machines. Experiments generate the connection between samples and study. Further information can be found in the Submission Tour6. Create Run Samples, experiments and files are linked through runs. To register a run, you will be asked to select the appropriate experiment and the file format. Run registration can be done either individually or in batch by using a template. Batch upload: download the template and complete it with the sample - file linkage. Upload the run.csv and the runs will register.As the INBOX is a directory, bear in mind to include the file path (/). Example: /filename.c4gh. Add single run: select the file format, sample and experiment from the drop box. For re-using submitted samples, please use the EGA accession ID (EGANXXX). Please note that files must be uploaded in your inbox before linking your files and samples. Further information can be found in the Submission Tour7. Create Analysis Analysis should be only used for BAM/BAI or CRAM/CRAI pair, VCF and phenotype linkage to samples. The analysis is an EGA specific metadata object that links samples to files. This object also stores some metadata about your experiments, such as the experiment type, genome reference, or the platform used. **If only BAM or CRAM alignment files are submitted but not the original unaligned FASTQ files, then please make sure that the BAM or CRAM files also contain the unaligned reads. This is critical to enable primary re-analysis and re-alignment of the dataset using new tools or future genome assemblies.** Start by selecting the samples to be linked to the file, and then populate the required attribute fields. Please be aware of the existence of mandatory fields that must be populated.When populating the chromosome field (mandatory), please select the chromosomes from the checkbox. Please take in consideration that EGA allows for the re-use of any registered metadata. Therefore, a previously registered study or samples can be referenced for the analysis in the current data submission.Further information can be found in the Submission Tour 8. Create Dataset Dataset contains the collection of runs/analysis data files subjected to controlled access by being associated with a Policy. Complete the mandatory fields such as title, description, type and policy. Please, take in consideration that DAC and Policy must be registered in advance in the DAC Portal. Similar to other metadata objects, you can re-use previous runs or analyses, using their EGA accessions IDs (runs - EGAR, analyses - EGAZ). Further information can be found in the Submission Tour 9. Finalise submission Once the files are ingested please delete them from your SFTP INBOX before finalising your submission. This will prevent the files from reappearing in your Submitter Portal Inbox. Once you have completed your submission, click on the Finalise button, and schedule an estimated release date. Afterwards, your submission will be sent to Helpdesk for approval. Please note that once the Helpdesk has approved your submission, you will receive the identifiers for your data. See the Frequently Asked Questions (FAQ) for more information. 10. Update closed submission If you want to append more file to a closed submission, you will need to re-open the submission where the dataset was registered. Find the Submission: go to the Submitter Portal Menu -> Datasets section and find the submission id (EGA0XXX).  Reopen the submission where the dataset is located: to reopen a submission, you must edit any object within the submission. For example, you can copy and paste the title. Take The Tour The Submitter Portal Take The Tour is a visual guidance of all the steps described previously about how to start a submission. Tutorial In this tutorial we will show you how to use the Submitter Portal to register your metadata. Please note the video focuses on the run-based submission (for raw files - fastq - and aligned data - BAM/CRAM) and analysis-based submission (for your BAM/BAI pairs, variation -VCF - and phenotype files).

  Documentation submission/metadata/submission/sequencing-phenotype/submitter-portal

• Sequencing data (BAM files) from - A mutation in VPS15 (PIK3R4) causes a ciliopathy and affects IFT20 release from the cis-Golgi. The Data Access Committee (DAC) is responsible for sequencing data release to external requestors based on consent and/or National Research Ethics terms.

  Dac EGAC00001000552

• EGAD00010000744

  Subset 2 of osteoarthritis cases genotyped on Illumina 610k from the arcOGEN Consortium (http://www.arcogen.org.uk/) with consent for osteoarthritis studies only.

  Dataset EGAD00010000744

• The T cell receptor repertoire of tumor infiltrating T cells is predictive and prognostic for cancer survival

  Transcriptomic sequencing on pre-immunotherapy melanoma patients.

  Dataset EGAD00001007710

• OncoScan SNP data set for localized follicular lymphoma (lFL)

  149 unpaired initial tumor samples (133/149 FFPE and 16/149 fresh frozen samples) of lFL patients measured with OncoScan SNP microarrays, Affymetrix CEL intensity data file types (Thermo Fisher Scientific, Waltham, Massachusetts, USA)

  Dataset EGAD00010002593

• SECRETO Oral metagenome

  The dataset comprises data for n=329 participants who underwent saliva sampling. Shotgun metagenomic paired-end sequencing was conducted using the Illumina NovaSeq 6000 platform, and the resulting files are in FASTQ format.

  Dataset EGAD50000000283

• Multi time/space shallow whole genome sequencing of esophageal adenocarcinoma's

  Shallow whole genome sequencing of 170 samples from 24 esophageal adenocarcinoma's. DNA was obtained from FFPE stored material. Illumna Hiseq 400 was used for sequencing.

  Dataset EGAD50000000318

• Multimodal epigenetic sequencing analysis for colon cancer

  Targeted methylation sequencing (enzymatic conversion) data of plasma samples collected from colon cancer patients and non-cancer subjects.

  Study EGAS50000000052

• AmsterdamUMC Data Access Committee for the EPIC-CD study

  The current data access committee reviews and assesses data requests of researchers that seek to gain access to data acquired as part of the EPIC-CD project as performed at the AmsterdamUMC, Amsterdam, Netherlands.

  Dac EGAC50000000097

• ATAC Dataset for 19 T-ALL patient samples and 1 normal control sample

  19 ATAC-seq from T-ALL patient samples and one healthy normal control sample. Reads were aligned to HG38 reference

  Dataset EGAD50000000024

• L1-Architect Project DAC

  This Data Access Committee and policies are for controlling the correct use of the omics datasets generated within the L1-Architect Project, to investigate the impact of L1 transposable elements in tumours with high and ultrahigh rates of somatic retrotransposition

  Dac EGAC50000000289

• SCLC MeDIP-seq

  Methylation profile of 33 patients with small cell lung cancer (SCLC) for both, tumour and normal lung samples using MeDIP-seq.

  Dataset EGAD50000000724

• Clinical data and mapping file

  Patient demographic characteristics, treatment, and survival data for IMbrave151 (N = 162), with one patient per line. Mapping file to map anonymized subject IDs to RNAseq IDs

  Dataset EGAD50000000569

• WGS FASTQ files studied in A first-in-human clinical study of an allogenic iPSC-derived corneal endothelial cell substitute transplantation for bullous keratopathy

  This data set contains 2 paired fastq files (WGS).

  Dataset EGAD50000000947

• UMI-4C in LCLs derived from constitutional MLH1 epimutation carriers and non-carrier relatives

  UMI-4C sequencing data generated for MLH1 promoter to assess allele-specific interactions in LCLs derived from constitutional MLH1 epimutation carriers and non-carrier relatives

  Dataset EGAD50000000713

• RNAseq TPM

  RNAseq TPM matrix (transcriptome profiling by high-thoughput sequencing) Matrix (30,727 features by 2,803 samples) of log2-transformed TPM counts from RNAseq data for the four IMvigor trials.

  Dataset EGAD50000001100

• WGBS dataset for lymphnode metastasis samples from prostate cancer

  This dataset contains WGBS sequencing data of lymphnode metastasis samples from prostate cancer. Sequencing was performed on Illumina HiSeq X Ten. The sequencing was always paired.

  Dataset EGAD50000001183

• Dac for "Molecularly matched targeted therapies plus radiotherapy in patients with newly diagnosed glioblastoma without MGMT promoter hypermethylation (N2M2/NOA-20 phase I/IIa umbrella trial)" with PD Dr. med. Tobias Kessler, t.kessler@dkfz.de/ Prof. Dr. med. Wolfgang Wick, wolfgang.wick@med.uni-heidelberg.de

  Dac EGAC00001003521

• ST lobular manuscript dataset

  Spatial transcriptomics analysis for 43 breast cancer lobular samples. Note that there are 2 runs per sample Images and read counts will be made availalble on Zenodo upon publication.

  Dataset EGAD50000001467

• Sequenced IDH wildtype, untreated, human glioblastoma samples (GB-UK cohort)

  BAM files for 42 IDH wildtype, untreated, human glioblastoma samples from the GB-UK cohort, published in Noorani & Haughey et al. Cancer Discovery (2025).

  Dataset EGAD50000001649

• Dataset for RNA sequencing glioblastoma data

  This dataset contains RNA sequencing data of 36 glioblastoma samples. Sequencing was performed on Illumina NovaSeq 6000 using TruSeq Stranded RNA Kit. The sequencing was always paired.

  Dataset EGAD50000000688

• DAC for Liquid CNA in High Grade Serous Ovarian Cancer

  Low pass sequencing of sequential cell free and tumour DNA with matched whole genome sequencing from five patients with high grade serous ovarian cancer presented in Hockings et al Cancer Research paper, 2025.

  Dac EGAC50000000648